Coupling | Flex shaft & Co.

Flex shaft | 2,45mm (0,1") | 100cm (39,37") | Left

Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:High quality for high power setups2,45mm (0,1") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.

€14.00*

Flex shaft | 2,45mm (0,1") | 100cm (39,37") | Right

€14.00*

Flex shaft | 3,2mm (1,8") | 100cm (39,37") | Left

Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:High quality for high power setups3,2mm (1,8") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.

€14.00*

Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Left

Highest quality for highest demandsWith our flex shaft your project will have no limitThe advantages at a glance:High quality for high power setups4,75mm (3/16") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.

€15.50*

Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Right

€15.50*

Flex shaft | 30cm (11,8") | Left | 6,35mm (1/4")

Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:Swiss quality for high power setupsIntegrated gold wire so rotation direction is shown right away 6,35mm (1/4") diameterSquared end on one side - can be removed for usage with collet clutchProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.

Content: 0.3 Running meter (€20.00* / 1 Running meter)

€6.00*

Flex shaft | 6,35mm (1/4") | 67cm (26,38") | Left

Content: 0.67 Running meter (€20.90* / 1 Running meter)

€14.00*

Flex shaft | 6,35mm (1/4") | 100cm (39,37") | Left

€22.00*

Flex shaft | 6,35mm (1/4") | 30cm (11,8") | Right

Content: 0.3 Running meter (€20.00* / 1 Running meter)

€6.00*

Flex shaft | 6,35mm (1/4") | 67cm (26,38") | Right

Content: 0.67 Running meter (€20.90* / 1 Running meter)

€14.00*

Flex shaft | 6,35mm (1/4") | 100cm (39,37") | Right

€22.00*

Flex shaft | Set | 4,75mm (3/16") | L+R

Easy and fast solutionWith our flex shaft set you get a suitable and uncomplicated solution for your boat with 4,75mm (3/16") twin drive.That's included:Flex shaft left 4,75mm (3/16")Flex shaft right 4,75mm (3/16") 2 x Brass PTFE tube 7mm (0,28")How its doneFor best grip, we recommend sanding the flex shaft before assembly, degreasing it and then gluing it into the prop shaft with Loctite.

€26.90*

Flex shaft | Set | 6,35mm (1/4") | L+R

Easy and fast solutionWith our flex shaft set you get a suitable and uncomplicated solution for your boat with 6,35mm (1/4") twin drive.That's included:Flex shaft left 6,35mm (1/4")Flex shaft right 6,35mm (1/4") 2 x Brass PTFE tube 10mm (0,39")How its doneFor best grip, we recommend sanding the flex shaft before assembly, degreasing it and then gluing it into the prop shaft with Loctite.

€30.00*

Brass PTFE Hose | Steven pipe | 7mm (0,27") | 30cm (11,81") length

Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 4,75mm (3/16") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently.

€8.00*

Brass PTFE Hose | Steven pipe | 10mm (0,39") | 30cm (11,81") length

Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 6,35mm (1/4") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently.

€8.60*

Brass PTFE Hose | Steven pipe | 10mm (0,39") | 100cm (39,37") length

Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 6,35mm (1/4") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently.

€23.00*

Adapter | Square end | Flex shaft 6,35mm (1/4")

You need square end on both sides?Our adapter will help you out. Just connect with the round end of your flex shaft. This way you have square end on both sides according to your requirements. The advantages at a glanceBoth side square end for your flex shaft according to your requirementsSuitable for 6,35mm (1/4") flex shaftThats how its doneWe recommend to grind down and degrease the flex shaft before gluing process. Further we recommend to use Loctite for secure bonding.

€13.00*

Prop shaft + Flex shaft | 6,35mm

Spare part by handSpare prop shaft 6,35mm (1/4") made of stainless steel ready for usage with already glued in flex shaft (rotation according to your order)That fitsStrut 1071Strut with outrigger short 1075-KStrut with outrigger long 1075-LGood to knowTo avoid lost of your prop shaft and propeller, we suggest to use our flex safety with ball bearing.

from €27.00*

Details

Flex shaft set | Mystic 840mm | Prop + Flex shaft | 4,75mm (3/16")

Quick and easyThis set is perfect for quick and easy change of your Mystic 1140mm drive prop shafts. No more sanding, degreasing, gluing and hours of waiting. This shaft set is ready for usage so you are back on the water right away. Thats included:2 prop shafts with drive dog1 flex shaft 4,75mm (3/16") left - already glued to prop shaft1 flex shaft 4,75mm (3/16") right - already glued to prop shaftGood to knowThe flex shafts are much longer than needed on purpose. This way you are able to simply shorten them to required size and collect to your collet clutch directlyWe recommend a distance of 1,5mm between drive dog and drive body

€80.00*

Flex shaft set | Mystic 1140mm | Prop + Flex shaft | 4,75mm (3/16")

€98.00*

Flex shaft set | Mystic 1380mm | Prop + Flex shaft | 6,35mm (1/4")

Quick and easyThis set is perfect for quick and easy change of your Mystic 1380mm drive prop shafts. No more sanding, degreasing, gluing and hours of waiting. This shaft set is ready for usage so you are back on the water right away. Thats included:2 prop shafts with drive dog1 flex shaft 6,35mm (1/4") left - already glued to prop shaft1 flex shaft 6,35mm (1/4") right - already glued to prop shaftGood to knowThe flex shafts are much longer than needed on purpose. This way you are able to simply shorten them to required size and collect to your collet clutch directly.

€98.00*

Flex shaft set | Mystic 1850 - 1890mm | Prop + Flex shaft | 6,35mm (1/4")

Quick and easyThis set is perfect for quick and easy change of your Mystic 1850 - 1890mm drive prop shafts. No more sanding, degreasing, gluing and hours of waiting. This shaft set is ready for usage so you are back on the water right away. Thats included:2 prop shafts with drive dog1 flex shaft 6,35mm (1/4") left - already glued to prop shaft1 flex shaft 6,35mm (1/4") right - already glued to prop shaftGood to knowThe flex shafts are much longer than needed on purpose. This way you are able to simply shorten them to required size and collect to your collet clutch directly.

€98.00*

Support | Steven pipe | Brass pipe | 7mm (0,28")

Securing the brass - PTFE tubeThe advantages at a glance Securely mount the brass PTFE tube in your boat Height individually adjustable The flex shaft is prevented from swinging up Manufactured from high-strength aluminum 7075How its doneFor easy assembly, we recommend using polymer glue. To do this, degrease the fuselage at the required point using brake cleaner and then glue in the stern tube holder.

€16.00*

Support | Steven pipe | Brass pipe | 10mm (0,39")

€17.00*