Motor mount | Carbon | 40er Inrunner motors | Incl. ESC mount
€49.90*
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
2412.2
Shipping weight/volume:
0.2 kg
Available stock:
5
Product information "Motor mount | Carbon | 40er Inrunner motors | Incl. ESC mount"
Boat building made easy
With this motor-ESC holder combo, your boat is set up quickly. No long searches, measuring, cutting. All parts fit perfectly.
The advantages at a glance
- Dual Motor Mount | The engine is optimally supported both at the rear and at the front
- Height and angle individually adjustable
- Integrated ESC bracket ensures short wiring, shorter cooling paths and protection against flow loss
- Smaller cut-outs on the rails ensure an optimal connection between boat and holder (We recommend using polymer glue)
- Required screws included to delivery as well
That's how it's done
- Degrease the motor mount (e.g. with brake cleaner) and glue it directly in the boat at the desired location
Technical datas
| Length: | 130mm (5,12") |
|---|---|
| Total width: | 67mm (2,64") |
| Inner diameter: | 40mm (1,57") |
| Material motor mount rings: | Aluminium 7075 | Anodized black |
| Material side parts: | 2mm (0,08") Carbon |
| ESC mount: | 2mm (0,08") Carbon 90 x 45mm |
| Included screws: | Screws 4 x M4x8 + 4 Washers | Screws 4 x M3 x 6 + Washers | Screws 4 x M3 x 8 |
Motor mount | Carbon | 40er Inrunner motors | Incl. ESC mount
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Collet clutch | 5 - 4,75mm (0,19" - 3/16") | Aluminium 7075
Top quality for the highest demandsOur collet coupling is made from aluminum 7075 and ensures a safe, precise and imbalance-free connection between the flex shaft and the motor.The advantages at a glanceMade of aluminum 7075 Absolutely centric and free of imbalance Fine thread Loss-free transmission of torque to the flex shaft easy assembly and disassembly That fits Suitable for 4.75mm (3/16") flex shaft Suitable for 5mm (0,19") motor shaft How it's donePart 1 of the coupling is pushed onto the motor shaft and secured using the two grub screws (optionally with Loctite). Then the union nut (part 2) is pushed onto the flexible shaft and connected to part 1.
€19.00*
Water cooling jacket | 45 x 50mm (1,77 x 1,97") | Inrunner motors | 40er Series
Stay coolWith this water cooling jacket, suitable for inrunner brushless motors, your inrunner motor is water-cooled.The advantages at a glanceEasy to retrofit | is pushed directly onto the engine and connected to the cooling circuit inside the boat.Suitable for internal rotor motors of the 40er series, like 4082, 4092...Delivery includes O-rings for internal sealing of the water cooling jacket Delivery including cooling water nipple How it`s doneGrease O-rings with Vaseline Insert into the cooling jacket Slide the cooling jacket onto the engine Connect the cooling nipple to the water circuit with a silicone hose (sequence: inlet, controller, motor, outlet)
€17.00*