Mystic | C5000 | Catamaran | 840mm (33,07") | + White Paint
€270.00*
Content:
1 Piece
Preorder, Delivery time: 14 - 28 labor days**
Product number:
1675-CFK
Shipping weight/volume:
4 kg
Product information "Mystic | C5000 | Catamaran | 840mm (33,07") | + White Paint"
The original with the uniquely good driving characteristics
There are many copies, but the handling and quality of our Mystic C5000 remains unmatched. Due to the design, our Mystic catamaran combines elegance and speed like no other boat. The specially shaped tunnel ensures perfect handling, atypical for catamarans, even in curves and at high speeds. When it comes to motorization, you can let off steam with this model with the most powerful electric motors. Speeds of over 180km/h are no problem for this hull.
The advantages at a glance
- Uniquely good driving characteristics for high speed and excellent cornering
- Only production worldwide according to the original data of the well-known Mystic C5000 by John Cosker
That fits
- If you like to add more color to your white Mystic you may purchase our fitting decal set which you can find here: Decal grey or Decal green
- Suitable for inner and outer rotor motors of the 30 and 40 series
- Suitable for assembly with our special scale drives | 1675-A
Good to know
- The center of gravity for the setup is in the middle of the second stage as viewed from the stern
- Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 CFK + 1 layer 100 GRP)
Please notice that this product is not a ready to drive product.
Further this product is a model building accessories, therefore no toy.
Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason.
Videos
YouTube
Technical details
| Length: | 840mm (33,07") |
|---|---|
| Width: | 220mm (8,66") |
| Height: | 70mm (2,75") |
| Weight: | approx. 1200g (approx. 2,65 lbs) |
| Material: | CFK/ FRP (Carbon + Fibre glass reinforced plastic) |
| Color: | White |
| Center of gravity for assembly: | Middle of second step from transom |
Download Assembly example
Mystic | C5000 | Catamaran | 840mm (33,07")
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Drives | Mystic 840mm | 4,75mm (3/16") | 1 Pair
Sophisticated solutions for highest demandsSuitable drives for your Mystic 840mm and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds. Details at a glance Made of highest quality aluminium 7075 Black anodizing for great looks and protection against corrosion Special hydrodynamic profile Stainless steel prop shaft Salt water reistance Slight bearings ensure higher efficiency and low maintenance than ball bearings Washers made of PEEK material for much longer service time than PTFE and other materials. Good to knowThe drives do have an ajustable angle of +/-4° We recommend a distance of 1,5mm between drive dog and drive bodyTips for easy installation A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now. Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now. For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us
€140.00*
Rudder | Mystic 840mm (33,07") | C5000
Rudder with double steering and many featuresSuitable for your Mystic 840mm.The advantages at a glance: Two-sided rudder linkage device Look a like screws on top for scale look Assembly is done by 2 srews and flange directly - no special transom of hull requiredBlack anodizing for added protection against corrosion The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Good to knowA little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.
€67.00*
Flex shaft | Set | 4,75mm (3/16") | L+R
Easy and fast solutionWith our flex shaft set you get a suitable and uncomplicated solution for your boat with 4,75mm (3/16") twin drive.That's included:Flex shaft left 4,75mm (3/16")Flex shaft right 4,75mm (3/16") 2 x Brass PTFE tube 7mm (0,28")How its doneFor best grip, we recommend sanding the flex shaft before assembly, degreasing it and then gluing it into the prop shaft with Loctite.
€26.90*
Servo mount | Carbon | Several sizes
Size:
S
Carbon servo mountFor quick and easy assembly. If used with the Mystic C5000 the servo mount supplies additional support for the hatch.The advantages at a glance 3 parts - for quick and easy expansion Made from carbon We recommend polymer glue for assembly
from €9.90*
Motor mount | Mystic | Several sizes
Mystic version:
840mm (33,07")
Perfect fit for our Mystic catamaranThis motor mount is available in different sizes and then each fits perfectly for the respective Mystic size and internal and external rotor motors The advantages at a glance Absolutely perfect for the respective Mystic size This provides additional reinforcement in the tunnel Suitable for internal and external rotor motors Universal Drilling | Therefore suitable for different motor types
from €29.90*