Prop shaft | Mystic 840mm | 4,75mm (3/16")

€34.00*

Content: 1 Piece

Prices incl. VAT plus shipping costs

Available, delivery time: 1-5 labor days**

Product number: 1675-E

Shipping weight/volume: 0.1 kg

Available stock: 2

Product information "Prop shaft | Mystic 840mm | 4,75mm (3/16") "

Because sometimes things dont work out as planned

No problem with our spare prop shaft for your Mystic 840mm, you are back at the water in a hurry.

Good to know

In order to prevent the loss of your propeller and prop shaft, we recommend to use our flex safety with bearings which keeps the prop shaft inside of the hull just in case.

Length prop shaft:	75mm (2,95")
Milling:	4,75mm (3/16")
Outside diamater:	6mm (0,24")
Material:	Stainless steel
Weight	12g
Delivery contains:	1 pcs.

Prop shaft | Mystic 840mm | 4,75mm (3/16")

Product safety information:

Manufacturer:

MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com

That fits

Drives | Mystic 840mm | 4,75mm (3/16") | 1 Pair

Sophisticated solutions for highest demandsSuitable drives for your Mystic 840mm and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds. Details at a glance Made of highest quality aluminium 7075 Black anodizing for great looks and protection against corrosion Special hydrodynamic profile Stainless steel prop shaft Salt water reistance Slight bearings ensure higher efficiency and low maintenance than ball bearings Washers made of PEEK material for much longer service time than PTFE and other materials. Good to knowThe drives do have an ajustable angle of +/-4° We recommend a distance of 1,5mm between drive dog and drive bodyTips for easy installation A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now. Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now. For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us

€140.00*

Flex shaft | Set | 4,75mm (3/16") | L+R

Easy and fast solutionWith our flex shaft set you get a suitable and uncomplicated solution for your boat with 4,75mm (3/16") twin drive.That's included:Flex shaft left 4,75mm (3/16")Flex shaft right 4,75mm (3/16") 2 x Brass PTFE tube 7mm (0,28")How its doneFor best grip, we recommend sanding the flex shaft before assembly, degreasing it and then gluing it into the prop shaft with Loctite.

€26.90*

Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Left

Highest quality for highest demandsWith our flex shaft your project will have no limitThe advantages at a glance:High quality for high power setups4,75mm (3/16") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.

€15.50*

Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Right

€15.50*

Brass PTFE Hose | Steven pipe | 7mm (0,27") | 30cm (11,81") length

Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 4,75mm (3/16") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently.

€8.00*