GTX | Offshore boat | 1810mm (71,23") | Bundle Box
€1,400.00*
% instead of €1,576.70* single purchase price (11.21% saved)
Content:
1 Piece
Preorder, Delivery time: 18 - 34 labor days**
Product number:
1696-BB-CFK
Shipping weight/volume:
11.5 kg
Product information "GTX | Offshore boat | 1810mm (71,23") | Bundle Box"
Hommage to the original GTX SV50 Outerlimits
Designed by Mike Fiore, founder of Outerlimits Inc. Our GTX model boat is based on the original datas and therefore impresses with its excellent driving characteristics.
- 1x GTX Offshore boat | 1696-CFK
- 2x Strut | 1075-L
- 2x Hull passage | 1070-1.3
- 1x Rudder Maxi | 1069
- 1x Flex shaft | 1005
- 1x Flex shaft | 1005-R
- 2x Brass PTFe pipe | 1003
- 2x Steven pipe support | 1011
- 2x Flex safety | 2256
- 1x Rudder steering | 1833.1
- 2x Rubber cuff | 1649
- 2x Water inlet | 1791
- 2x Water outlet | 1795
- 2x Silicon hose | 1552
- 2x Clips | 1556
- 2x Batterie mount | 2127
- 2x Motor mount | 2413
- 1x Servo mount | 1767-AS2
The advantages at a glance:
- Excellent driving quality
- Suitable for 50er in- and outrunner motors
- Suitable for gasoline engines with up to 32ccm
- Several setup option such as Z-drive, rudder strut set, trimax.....
Good to know
- The center of gravity for construction is 26-28%
- Manufactured using the "wet in wet" sandwich process (1 layer 100 GFK + 1 layer 160 GFK+ 1 layer 100 GFK)
Please notice that this product is not a ready to drive product.
Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason.
Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason.
| Length: | 1810mm (71,26") |
|---|---|
| Width: | 385mm (15,16") |
| Height: | 250mm (9,84") |
| Weight: | Approx. 6000g (approx. 13,23lbs) |
| Material: | CFK/ FRP (Carbon + Fibre glass reinforced plastic) |
| Color: | White |
| Center of gravity for assembly: | 26-28% from transom |
GTX | Offshore boat | 1810mm (71,23") | Bundle Box
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Z-drive | S6 | 6,35mm (1/4")
Popular classic in new best formAs the successor to our sterndrive, we decided to design a new and improved version of the S6 sterndrive. The improvements at a glance:The body of the Z-drive is no longer made of cast aluminum, but of CNC-milled aluminum 7075The surface is compacted and additionally protected against corrosion and refined by anodizingClosed lubrication with low-viscosity gear grease. Smearing in the boat as in the predecessor is therefore a thing of the pastHelical gears are not pressed, but CNC milled, hardened, ground and therefore much more accurate and robustAll drive shafts are made of stainless steel (V2A). The upper shaft has two bearings, the lower shaft has three bearings and both are sealed by a SimmerringThe output speed is 1:1 Each drive is assembled by hand directly at and by us. A drilling template is also included in the scope of delivery and makes installation easier for you. Good to knowThe drive has a square mount for 6.35mm (1/4") flex shaft. By usage of our flex shaft with square end, the square end needs to be shortened by 13-14mmThe S6 drive can be used for both left and right rotation Suitable for boats from approx. 1200mm (with double drive 1400mm length) Suitable for 50 electric motors max. 32,000 rpm and 26-32cc power Suitable for use with semi-submerged propeller The drive has a Brass- PTFE holder. The peak of the torpedo should be for hulls with steps 2-4mm below keel line for hulls without steps 2-4mm above the keel line for assemblyIf 2 drives are used, the distance between drives should be 82mm for mono boats. For catamaran it depends on the hull itself.
Care instructionsThe drive must be commissioned in water only, as otherwise insufficient cooling can lead to damage to the shaft seal. The drive should be greased as required.For further questions please contact us
€369.00*
%
Z-drive | S6 | 6,35mm (1/4") | Bundle Box
Popular classic in new best formAs the successor to our sterndrive, we decided to design a new and improved version of the S6 sterndrive. Bundle Box including:Z-drive 1729-S6Steering 1729-4ASThe improvements at a glance:The body of the Z-drive is no longer made of cast aluminum, but of CNC-milled aluminum 7075The surface is compacted and additionally protected against corrosion and refined by anodizingClosed lubrication with low-viscosity gear grease. Smearing in the boat as in the predecessor is therefore a thing of the pastHelical gears are not pressed, but CNC milled, hardened, ground and therefore much more accurate and robustAll drive shafts are made of stainless steel (V2A). The upper shaft has two bearings, the lower shaft has three bearings and both are sealed by a SimmerringThe output speed is 1:1 Each drive is assembled by hand directly at and by us. A drilling template is also included in the scope of delivery and makes installation easier for you. Good to knowThe drive has a square mount for 6.35mm (1/4") flex shaft. By usage of our flex shaft with square end, the square end needs to be shortened by 13-14mmThe S6 drive can be used for both left and right rotation Suitable for boats from approx. 1200mm (with double drive 1400mm length) Suitable for 50 electric motors max. 32,000 rpm and 26-32cc power Suitable for use with semi-submerged propeller The drive has a Brass- PTFE holder. The peak of the torpedo should be for hulls with steps 2-4mm below keel line for hulls without steps 2-4mm above the keel line for assemblyIf 2 drives are used, the distance between drives should be 82mm for mono boats. For catamaran it depends on the hull itself.
Care instructionsThe drive must be commissioned in water only, as otherwise insufficient cooling can lead to damage to the shaft seal. The drive should be greased as required.For further questions please contact us
€376.00*
instead of
€387.00*
single purchase price (2.84% saved)
Rudder Strut 4 Set | Maxi | 6,35mm (1/4")
Length rudder blade:
155mm (6,10")
Universal complete system for your boat from 150cm (59,1")The advantages at a glance: Two-sided rudder linkage device Height adjustable strut Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsThats included: Rudder - strut system (strut 4) with linkage levers on both sides Thrust washer made of PEEK material Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us
from €150.00*
Rudder | Maxi | 193mm (7,6")
Length rudder blade:
155mm (6,10")
Rudder with boat sided steering for your boat from 150cm (59,1")The advantages at a glance: Two-sided rudder linkage device Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsGood to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.
from €114.00*
Strut 5 + Outrigger | 6,35mm (1/4") | Long
Simple design that convincesThe advantages at a glance:
Adjustable inclineMade of high quality aluminum 7075Prop shaft made of V2A - therefore salt water resistantBrass tube can be glued directly into the strut That fits Hydroplane, outrigger, catamaran, monoboat from 110cm (43,3")Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. Place a piece of white paper on the oarstand and rub over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us
€49.00*