Brushless motor | 56110-950KV | Inrunner motor

€190.00*

Content: 1 Piece

Prices incl. VAT plus shipping costs

In stock, delivery time: 1-5 labor days**

Product number: 2220

Shipping weight/volume: 1.3 kg

Available stock: 3

Product information "Brushless motor | 56110-950KV | Inrunner motor "

Good quality at a low price

The advantages at a glance

6 pole rotor
Double ball bearing
Good torque | heat build-up ratio
High balanced magnet armature
Smooth running even at high speeds
Direction of rotation of the motor can be changed by changing the phases

That fits

Model boats from approx. 1,15m length
240 - 300A ESC
8S | 2 blade propellers | Aluminum | slope 1.4 | Diameter 58-62mm
8S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 57-61mm
10S | 2 blade propellers | Aluminum | slope 1.4 | Diameter 60-64mm
10S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 59-63mm
12S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 57-64mm
12S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 56-63mm

For further questions please contact us

Technical datas

Pole:	4
RPM:	950KV (U/pV) \| Max. 50.000upm
Motor diameter:	56mm (2,2")
Motor shaft:	8 x 30mm (0,31 x 1,18")
Timing:	5 - 7,5°
Max. A:	210A
No load current:	4,3A
Volt:	36V
Watt:	7600W 7,6KW)
Weight:	1160g
Max. lipo:	8 - 12S
Attachment circle:	30mm \| for M4x6 screws

Brushless motor | 56110-950KV | Inrunner motor

Product safety information:

Manufacturer:

Shenzhen Feisuda Electrical Machinery Co. Ltd.
A73, Fuchengao Industrial
Pinghu Town, Shenzhen City | China
Email: fsd2008@hotmail.com

Responsible person:

MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com

Manual

That fits

Water cooling jacket | 62 x 75mm (2,44 x 2,95") | Inrunner motors | 50er Series

Stay coolWith this water cooling jacket, suitable for inrunner brushless motors, your inrunner motor is water-cooled.The advantages at a glanceEasy to retrofit | is pushed directly onto the engine and connected to the cooling circuit inside the boat.Suitable for internal rotor motors of the 50er series, like 5692, 56110...Delivery includes O-rings for internal sealing of the water cooling jacket Delivery including cooling water nipple How it`s doneGrease O-rings with Vaseline Insert into the cooling jacket Slide the cooling jacket onto the engine Connect the cooling nipple to the water circuit with a silicone hose (sequence: inlet, controller, motor, outlet)

€23.00*

Collet clutch | 8 - 6,35mm (0,31" - 1/4") | Aluminium 7075

Top quality for the highest demandsOur collet coupling is made from aluminum 7075 and ensures a safe, precise and imbalance-free connection between the flex shaft and the motor.The advantages at a glancemade of aluminum 7075 absolutely centric and free of imbalance fine thread loss-free transmission of torque to the flex shaft easy assembly and disassembly That fits suitable for 6,35mm (1/4") flex shaft suitable for 8mm (0,31") motor shaft How it's donePart 1 of the coupling is pushed onto the motor shaft and secured using the two grub screws (optionally with Loctite). Then the union nut (part 2) is pushed onto the flexible shaft and connected to part 1.

€20.50*

Flex shaft | 6,35mm (1/4") | 67cm (26,38") | Left

Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:Swiss quality for high power setupsIntegrated gold wire so rotation direction is shown right away 6,35mm (1/4") diameterSquared end on one side - can be removed for usage with collet clutchProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.

Content: 0.67 Running meter (€20.90* / 1 Running meter)

€14.00*

Flex shaft | 6,35mm (1/4") | 30cm (11,8") | Right

Content: 0.3 Running meter (€23.33* / 1 Running meter)

€7.00*

Brass PTFE Hose | Steven pipe | 10mm (0,39") | 100cm (39,37") length

Protection for your flex shaftOur brass- PTFE hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 6,35mm (1/4") flex shaftGreasy PTFE material avoids friction between flex shaft and brass pipe Thats how its done We recommend to grease your flex shaft frequently.

€29.90*

Aluminium pipe | Steven pipe | 10mm (0,39") | 100cm (39,37") length

For your own projectsAluminium pipe with 10mm inner diameter and 9mm outer diameter.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 6,35mm (1/4") flex shaft

€1.55*

Brass PTFE Hose | Steven pipe | 10mm (0,39") | 30cm (11,81") length

Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 6,35mm (1/4") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently.

€8.60*

Motor mount | Carbon | 50er Inrunner motors | Incl. ESC mount

Boat building made easyWith this motor-ESC holder combo, your boat is set up quickly. No long searches, measuring, cutting. All parts fit perfectly. The advantages at a glance Dual Motor Mount | The engine is optimally supported both at the rear and at the front Height and angle individually adjustable Integrated ESC bracket ensures short wiring, shorter cooling paths and protection against flow loss Smaller cut-outs on the rails ensure an optimal connection between boat and holder (We recommend using polymer glue) Required screws included to delivery as wellThat's how it's done Degrease the motor mount (e.g. with brake cleaner) and glue it directly in the boat at the desired location

€59.90*