Motor mount | Twin inrunner | 40er & 50er motors
€22.00*
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
2415-M
Shipping weight/volume:
0.2 kg
Available stock:
14
Product information "Motor mount | Twin inrunner | 40er & 50er motors"
Perfect support for mono boats with twin drive
The advantages at a glance
- Can be used either as a front engine support or as an engine mount when using 2 pieces
- Suitable for mono boats
- Motor mount already specifies the correct spacing for dual propulsion mono boats
- Height of the holding plate can be easily and individually adjusted
Technical datas
| Width: | 141mm (5,55") |
|---|---|
| Height: | 46mm (1,81") |
| Inner diameter: | 40mm (1,57") |
| Distance inner diamater: | 80mm (3,15") |
| Material: | Aluminium anodized black | 3mm GFK |
| Maximum height: | 120mm (4,72") |
Motor mount | Twin inrunner | 40er & 50er motors
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Water cooling jacket | 62 x 75mm (2,44 x 2,95") | Inrunner motors | 50er Series
Stay coolWith this water cooling jacket, suitable for inrunner brushless motors, your inrunner motor is water-cooled.The advantages at a glanceEasy to retrofit | is pushed directly onto the engine and connected to the cooling circuit inside the boat.Suitable for internal rotor motors of the 50er series, like 5692, 56110...Delivery includes O-rings for internal sealing of the water cooling jacket Delivery including cooling water nipple How it`s doneGrease O-rings with Vaseline Insert into the cooling jacket Slide the cooling jacket onto the engine Connect the cooling nipple to the water circuit with a silicone hose (sequence: inlet, controller, motor, outlet)
€23.00*
Water cooling jacket | 45 x 50mm (1,77 x 1,97") | Inrunner motors | 40er Series
Stay coolWith this water cooling jacket, suitable for inrunner brushless motors, your inrunner motor is water-cooled.The advantages at a glanceEasy to retrofit | is pushed directly onto the engine and connected to the cooling circuit inside the boat.Suitable for internal rotor motors of the 40er series, like 4082, 4092...Delivery includes O-rings for internal sealing of the water cooling jacket Delivery including cooling water nipple How it`s doneGrease O-rings with Vaseline Insert into the cooling jacket Slide the cooling jacket onto the engine Connect the cooling nipple to the water circuit with a silicone hose (sequence: inlet, controller, motor, outlet)
€17.00*
Water cooling jacket | 45 x 62mm (1,77 x 2,44") | Inrunner motors | 40er Series
Stay coolWith this water cooling jacket, suitable for inrunner brushless motors, your inrunner motor is water-cooled.The advantages at a glanceEasy to retrofit | is pushed directly onto the engine and connected to the cooling circuit inside the boat.Suitable for internal rotor motors of the 40er series, like 4082, 4092...Delivery includes O-rings for internal sealing of the water cooling jacket Delivery including cooling water nipple How it`s doneGrease O-rings with Vaseline Insert into the cooling jacket Slide the cooling jacket onto the engine Connect the cooling nipple to the water circuit with a silicone hose (sequence: inlet, controller, motor, outlet)
€17.00*