Spare gear for older Z-drive versions or own projects Not suitable for current Z-drive versions!Gear is milled and hardenedTeeth: 17Total height: 10,2mmDiameter: 12,91mm - 18,26mmInner diameter: 6,96mm
Spare gear for older Z-drive versions or own projects Not suitable for current Z-drive versions!Gear is milled and hardenedTeeth: 16Total height: 9,85mmDiameter: 12,91mm - 17,3mmInner diameter: 6,96mm
Rudder with double steering Suitable for your boat between 100-160cm (39,37" - 62,99").The advantages at a glance: Both sided rudder linkage device Universal usableThe rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Good to knowA little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.
Quality from GermanyPTFE is a slightly greasy material and prevents friction between flex shaft and brass pipe. The advantages at a glancehigh quality PTFE for high rpm suitable for 2,2mm (0,09") flex shaft Thats how its doneWe recommend to use boat grease for your flex shaft as additional greasing.
How to avoid lost of propeller?Without our safety clamp it happens fast. Your boat hits a piece of driftwood or similair at the water and what should be a day by the water ends up with the lost of your flex shaft and propeller. The solution? Our safety clamp is screwed on to your flex shaft. In case of collision neither the flex- propshaft nor your propellers will slip through the millings.
The advantages at a glancePrecise security of your flex shaft to avoid lost of propeller2 Parted versionMade of high quality aluminium 7075Good to knowSince this flex safety contains of 2 parts, your flex can be secured much better (tighter) than by one piece flex safety.
Rudderblade
Suitable for your Ruder 1674-R for Mystic 1140mm.Good to know: The rudder blade is made of aluminium 7075Technical totally fineBecause of manufacturing process mistake, the blade is not highly polished. Therefore your chance of low cost replacement rudder blade
Universal rudder with double steering and 2 way option for usageSuitable for your boat between 100-140cm (39,37" - 55,12").The advantages at a glance: This universal rudder can be used in 2 ways. Either with attachment to rump of boat directly or with universal flange which also enlarges outrigger of rudder thenScale look Both sided rudder linkage device The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Good to knowA little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.
Rudder mount with single steering Suitable for your boat between 100-160cm (39,37" - 70").
Total length: 70mm (2,76")Adapter: 40 x 32,5mm (1,57 x 1,28")Rudder intake inner: 4,2mm (0,17")Material: Aluminium
Attachment milling: 4 x M4 Rudderblade not included.
Good to knowA little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.
Perfect support for mono boats with twin drive The advantages at a glance Can be used either as a front engine support or as an engine mount when using 2 pieces Suitable for mono boats Motor mount already specifies the correct spacing for dual propulsion mono boatsHeight of the holding plate can be easily and individually adjusted
For your own projectsAluminium pipe with 10mm inner diameter and 9mm outer diameter.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 6,35mm (1/4") flex shaft
Consistent?Of course! With our rubber sleeves for your linkage, steering, throttle cable ... water and dirt remain outside.The bellows are characterized by high elasticity and durability and are therefore an optimal companion for your project.
A clean thingKeep your setup tidy with these hose and cable holders. The advantages at a glance Available in single, double and triple holders Immediately ensures a clean and clear structure Suitable for hoses with an outer diameter of up to 7mm Easy assembly with superglue or other plastic adhesives
So that everything stays in its placePractical Velcro loops, 1 pair The advantages at a glance Versatile use for securing ESC, batteries.... In a chic, black design with the MHZ logo
Boat building made easyThis motor holder can be used as motor mount (usage of 2 pcs. required) or extra front support for your inrunner motor. Either way your boat is set up quickly with extra protection from vibration. The advantages at a glance Can be sued either as motor mount (usage of 2pcs.) or extra front support of your inrunner motorThe engine is optimally supported for less vibrationHeight and angle individually adjustable Smaller cut-outs on the rails ensure an optimal connection between boat and holder
(We recommend using polymer glue) Required screws included to delivery as wellThat's how it's done Degrease the motor mount (e.g. with brake cleaner) and glue it directly in the boat at the desired location
High performance requires a solid attachmentThis motor mount was made to fit our MHZ-Scorpion 7455-320KV motorThe advantages at a glance Perfect fit for our Scorpion 7455 Manufactured from high strength 11mm (0,43") thick aluminum 7075 Double bracket for perfect attachment and low vibration Rear plate of the engine mount with 12x28 -2RS ball bearing, which does not need to be greased and ensures that no radial forces act on the motor. Front motor mount does not require an extra ball bearing as this is already integrated in the front axle of the motor 8mm long, oval recesses for mounting at motor mount baseThats includedFront motor supportBack motor support6 x cylinder screws M5 x 18mm6 x washers
No wet feetTo protect your servo, receiver, receiver battery and other electronic parts you may use a RC Box for extra protection. This hull is for self assembly and includes the box and the polycarbonat hatch.The advantages at a glancebest laminate of epoxy resin and glass fabric4mm polycarbonate lid Also suitable for catamarans because of flat bottom
Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:High quality for high power setups2,45mm (0,1") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.
Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:High quality for high power setups3,2mm (1,8") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.
Flex shaft 6,35mm (1/4") - reverseFlex shaft 6.35mm (1/4") without square end - reverse / counter clock. The advantages at a glance:6,35mm (1/4") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.
Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:High quality for high power setups2,45mm (0,1") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.
To make sure everything runs wellTo make sure your drive is ready to go anytime it requires frequent greasing. The advantages at a glanceFor grease with medium consistency and high viscosity oilMade of steel, galvanizedWith universal mouthpiece and conical grease nipple DIN 71412 How its done Open the greas pump and remove the inner cap and chainFill in flex shaft greaseNow put the inner cap and chain back in and press down as far as possibleFor greasing remoce the red capPlace the opening of the pump on top of the greasing nipplePump perpendicular until you fill resistance.
Stay coolWith this water cooling jacket, suitable for inrunner brushless motors, your inrunner motor is water-cooled.The advantages at a glanceEasy to retrofit | is pushed directly onto the engine and connected to the cooling circuit inside the boat.Suitable for internal rotor motors of the 50er series, like 5692, 56110...Delivery includes O-rings for internal sealing of the water cooling jacket Delivery including cooling water nipple How it`s doneGrease O-rings with Vaseline Insert into the cooling jacket Slide the cooling jacket onto the engine Connect the cooling nipple to the water circuit with a silicone hose (sequence: inlet, controller, motor, outlet)
€23.00*
Trust Ecommerce Europe
Quality from Germany
This website uses cookies to ensure the best experience possible. More information...
