Hypnos | FSR-E | Monoboat | 660mm | ARTR

FSR meets MHZ 
The small Hypnos was first presented at the Bulgarian Championship in 2019 and won first place there. Now enters at the World Cup in Italy. The small boat inspires us by its high maneuverability and speeds of up to 100km / h (depending on the engine) and thus provides a sense of racing at any the local pond.

Thats included 
Thanks to the integrated flood channel, the Hypnos always lands on its "feet". Involuntary swim lessons are therefore no problem anymore. Further included are:

Motor mount with cooling nipple
Water inlet
Water outlet
Rudder with steering
Steven pipe system with flex shaft 3,2mm
Collet clutch 3,2 - 3.2mm
Silicon hose 3mm

As motorization we recommend to use a 3650 motor and 6S as well as a 29-31mm propeller and 100A ESC.

The little difference
This hull is available in different versions. In general, all of our hulls are manufactured using the sandwich "wet in wet" process (1 layer of 100er GFK + 1 layer of 160er GFK + optionally 1 layer of C-AFK or CFK + 1 layer of 100er GFK). In this way, the upper and lower part connect optimally and, unlike in vacuum process, there is no weak point on the seam edge of the boat. Which version suits you best depends on what plans you have with your power boat. GFK hulls are stable and suitable for normal speed up to 130Km/h. For higher speeds, we recommend using the C-AFK (very stable, firm, heavier than GFK) or CFK (very stable, flexible and lighter than C-AFK) version.