Hull passage | Trunk Passage | Sealing Steven Pipe | Aluminum
Prices incl. VAT plus shipping costs
Stocked: Delivery in 1-3 workdays **
Because it's just easy!
In order to facilitate the construction of your boat even further, there is now the hull passage, which serves as a seal for the steven pipe at the same time. Due to the installation, the strut can later be adjusted more easily horizontally and a clean and dense passage from the strut into the fuselage is ensured. Especially because brass is by itself a "greasy" material (tin content) and therefore compounds with epoxy resin can be difficult.
Good to know!
The installation is generally as deep as possible in the V of the hull and is glued with polymer adhesive. In case of damage (collision with driftwood, fish ...) no longer has the brass tube laboriously removed from the hull, but can be easily removed through the passage and renewed.
- 1 x trunk passage
- 1 x O-ring seal
For easy installation, we recommend using Polymer Adhesive # 1916. Further matching accessories can be found below in the section "That fits".
> Do you have any questions concerning this product?
|Outer Ø:||18,2mm (0,72")|
|Inner Ø:||8mm (0,31")|
|Brass / PTFE Pipe |
|Ø||7mm (0,28") for 4,75mm (3/16") flex shaft|
How is the hull passage mounted?
The passage is mounted at the lowest point of the V`s. This requires a hole with a diameter of 18.5mm. Now grease the O-ring and insert into the passage (smooth side) in the groove. Apply polymer adhesive to the corrugated part of the passage and insert it, starting with the smooth side, through the bore flush. Let it dry overnight - ready.
No minimum order quantity. Check shippment costs here.
We do accept payment by paypal and bank transfer. Credit card payment through paypal is also accepted.
Queries? Please contact us anytime by using our contact form.