Z-Drive | Sterndrive
Prices incl. VAT plus shipping costs
Preorder: Delivery time 1-3 Workdays
Our Z-drive made of high-quality Dural, 8 ball bearings, hardened shafts and running in an oil bath hypoid bevel gears, convinces by quiet running and strong performance. The output speed is 7% higher than the engine speed. For easy assembly, the Z-drive has a square inlet for 1/4" (6,35mm) flex shafts.The drive is designed for both left-hand and right-hand rotation, so the decisive factor here is the direction of rotation of the motor used.
Suitable for boats from 1.20m in length (with double drive from 1.40m length) and electric motors such as our Scorpion 5035 or 26-32cc engines with semi-submersed propellers.
Good to know!
Please note that the sterndrive is not greased before shipment for customs reasons and must therefore be lubricated with gear oil before use. Please also note that the drive should only be used in water - therefore not in the dry state. Otherwise, the drive will not be sufficiently cooled and shaft seals may be damaged.
> Do you have any questions concerning this product?
|Max. transfered power:||4 KW|
What distance is required if 2 Z-drives are used?
The distance should be 80-84mm.
Is this Z-drive steerable?
Yes, all of our Z-drives are steerable but it has to be done by you. You could work with a 2.5 - 3mm bicycle spoke for steering from on side only or with our sterring set #1833 for steering from both sides. Besides that you will also need a 15Kg quarter scale servo.
Which height shall be used for assembly?
The prop shaft of the drive shall be 2-3mm above the keel line
No minimum order quantity. Check shippment costs here.
We do accept payment by paypal and bank transfer. Credit card payment through paypal is also accepted.
Queries? Please contact us anytime by using our contact form.