Micro Iceberg | 440mm (17,3") | GFK

Micro scale model of the Iceberg catamaran
The Micro Iceberg is designed for the construction with one or two drives. We recommend the construction with two rigid shafts and a central rudder. The Micro Iceberg is suitable for smooth water.

That fits
Matching motorization offer two internal rotor with a 24mm diameter and about 3000-3800upV (2x 2S LiPo or Liion) and 29mm carbon propellers left and right. With this setup speeds of up to 100Km / h are possible.

Good to know
The focus of Micro Iceberg is seen at 35-38% from the transom.

The little difference
In general, all of our hulls are manufactured using the sandwich "wet in wet" process (1 layer of 100er GFK + 1 layer of 160er GFK +  1 layer of 100er GFK). In this way, the upper and lower part connect optimally and, unlike in vacuum process, there is no weak point on the seam edge of the boat.