Hydroplane |1380mm (54,33") | GFK

A real classic which we manufacture exclusively to your order

Hydroplane in a class of its own
You want to build a large hydroplane with strong engine? Then you make the right choice with this hull. Whether turbine, combustion engines from 26ccm or large electric motors like the Scorpion 5035 with 12S - you can let off steam here.

The features of this Hydroplane
The front canards and the rear wing are moveable, which significantly improves the driving characteristics. Furthermore, at the height of the canards, a lid is provided in both floats.

Good to know!
The center of gravity for assembly is 4cm behind the trailing edge of the float. The Miss Trendwest is suitable for smooth to slightly rough water.

The little difference
In general, all of our hulls are manufactured using the sandwich "wet in wet" process (1 layer of 100er GFK + 1 layer of 160er GFK +  1 layer of 100er GFK). In this way, the upper and lower part connect optimally and, unlike in vacuum process, there is no weak point on the seam edge of the boat