Chief 60 | Offshore Boat | Scale Boat | 1560mm (61,4")

Modern interpretation of the original Apache models.
After the two owners of the Apache split,  the same monoboot had been split in Chief and Apache. Although the Chief is more of a scale boat its still  suitable for every water and for both beginners and professionals. Very good handling is guaranteed with this boat model.

That fits
The setup is done with two drives of your choice (2x Z drive). Matching engine options here include two 22-32cc engine, two Scorpion 5035 or SSS motors. Further matching accessories can be found below in the section "That fits".

Good to know!
The center for the construction is 26-28% from the transom. For better buoyancy, we generally recommend the installation of floating noodles in the bow of large boats.

The little difference
This hull is available in different versions. In general, all of our hulls are manufactured using the sandwich "wet in wet" process (1 layer of 100er GFK + 1 layer of 160er GFK + optionally 1 layer of C-AFK or CFK + 1 layer of 100er GFK). In this way, the upper and lower part connect optimally and, unlike in vacuum process, there is no weak point on the seam edge of the boat. Which version suits you best depends on what plans you have with your power boat. GFK hulls are stable and suitable for normal speed up to 130Km/h. For higher speeds, we recommend using the C-AFK (very stable, firm, heavier than GFK) or CFK (very stable, flexible and lighter than C-AFK) version.