No Mercy | Offshore Boot | Bundle Box | 1580mm (62,2")

Bundle Box for easy assembly
No more searching for fitting parts. With our bundle box you cant go wrong. Each bundle box includes special fitting supplies for your RC boat. Each included item is perfectly fitting for this  hull and insures easy assembly and perfect driving performance. 

Boat info`s
The stepless monoboot allows sharp turning maneuvers at full speed and runs very stable even in rough water. For this reason, the No Mercy is just right for those who want to let off steam.

That`s included

• 1x No Mercy 1737
• 1x Brass PTFE pipe 1003
• 1x Flex shaft 6,35mm 1005
• 1x Silicon hose 1552
• 1x Steering 1833
• 1x Rudder Strut Set 1069-RS
• 1x Water inlet 1791
• 1x Water outlet 1795
• 1x Clips 1556
• 1x Hull passage 1070-1.3
• 1x Steven pipe support 1011
• 1x Flex safety 2256
• 1x Motor mount with ESC 50er motors 2413
• 2x Batterie mount 2127
• 1x RC mount 1632.1
• 2x rubber cuff 1648

Good to know!
The center of the gravity of the Caiman is 28-30% seen from the transom. The Caiman is perfect for smooth water and fast cornering

The little difference

This hull is available in different versions. In general, all of our hulls are manufactured using the sandwich "wet in wet" process (1 layer of 100er GFK + 1 layer of 160er GFK + optionally 1 layer of C-AFK or CFK + 1 layer of 100er GFK). In this way, the upper and lower part connect optimally and, unlike in vacuum process, there is no weak point on the seam edge of the boat. Which version suits you best depends on what plans you have with your power boat. GFK hulls are stable and suitable for normal speed up to 130Km/h. For higher speeds, we recommend using the C-AFK (very stable, firm, heavier than GFK) or CFK (very stable, flexible and lighter than C-AFK) version.