Racemaster | 987mm (38,85") | Several versions

Semi scale offshore model - 1 meter class
The evolution of the well known Dragon Lady and Superia. Due to its characteristics, our Racemaster is suitable for both starter and professionals.
We recommend the construction with one drive and 35er in- or 40mm (1800-2200kV) out runner motors as well as 4-6S.

Good to know
The center of gravity of this mono boat is 25-28% seen from transom. Matching accessories can be found below in the section "That fits".

The little difference
This hull is available in different versions. In general, all of our hulls are manufactured using the sandwich "wet in wet" process (1 layer of 100er GFK + 1 layer of 160er GFK + optionally 1 layer of C-AFK or CFK + 1 layer of 100er GFK). In this way, the upper and lower part connect optimally and, unlike in vacuum process, there is no weak point on the seam edge of the boat. Which version suits you best depends on what plans you have with your power boat. GFK hulls are stable and suitable for normal speed up to 130Km/h. For higher speeds, we recommend using the C-AFK (very stable, firm, heavier than GFK) or CFK (very stable, flexible and lighter than C-AFK) version.