Crackerbox | Mono boat | 1240mm (48,8")

West Coast - East Coast
What on the west coast are the cracker boxes on the east coast the jersey skiff dingi boats are. These are completely overpowered for fun, winner is who gets his boat in one piece to the finish. Power from 500PS are not uncommon here.

That fits
For the construction of your 1140mm GFK Crackerbox we recommend 26-32ccm engines or our Scorpion 5035 and a 1/4 "rudder strut combination. You may also use 1x Jet 52 or 2x Jet 4. The focus of this boat is 30% from the transom.

Good to know
We recommend the construction with Race Trimtabs (# 2251)

The little difference
This hull is available in different versions. In general, all of our hulls are manufactured using the sandwich "wet in wet" process (1 layer of 100er GFK + 1 layer of 160er GFK + optionally 1 layer of C-AFK or CFK + 1 layer of 100er GFK). In this way, the upper and lower part connect optimally and, unlike in vacuum process, there is no weak point on the seam edge of the boat. Which version suits you best depends on what plans you have with your power boat. GFK hulls are stable and suitable for normal speed up to 130Km/h. For higher speeds, we recommend using the C-AFK (very stable, firm, heavier than GFK) or CFK (very stable, flexible and lighter than C-AFK) version.