Berserk Design | Monoboat | Raceboat | 1250mm (49,2")

Interesting photos on facebook...
Enjoy a cup of espresso while browsing through  Facebook and then spott a beautiful design study for a monoboat. Cant get better? Of course! We contacted Petter Martens and he agreed to give us the datas, so we are able to introduce this beautiful racing boat to you. THANK YOU Petter!

That fits
For the construction certainly our new outboard drive or alternatively also the Powertrimm 5-L as well as a rudder / strut combination are suitable. Due to the advanced step design, you can already achieve considerable speeds with smaller engines such as the SSS 4092 engine or the 4035 MHZ Scorpion engine and 8S.

Good to know!
The focus for the construction is 26-28% from the transom. The Bersek Design is suitable for smooth to slightly rough water. Available optionally in GFK or C-AFK optionally also with paint finish.

The little difference
This hull is available in different versions. In general, all of our hulls are manufactured using the sandwich "wet in wet" process (1 layer of 100er GFK + 1 layer of 160er GFK + optionally 1 layer of C-AFK or CFK + 1 layer of 100er GFK). In this way, the upper and lower part connect optimally and, unlike in vacuum process, there is no weak point on the seam edge of the boat. Which version suits you best depends on what plans you have with your power boat. GFK hulls are stable and suitable for normal speed up to 130Km/h. For higher speeds, we recommend using the C-AFK (very stable, firm, heavier than GFK) or CFK (very stable, flexible and lighter than C-AFK) version.