Cooling water pump | Electro water pump
Prices incl. VAT plus shipping costs
Stocked: Delivery in 1-3 workdays **
To the limit and beyond!
For those who like to push their limits with the boat, there is our electric cooling water pump. Since normal water cooling is usually not sufficient at high speeds, we recommend installing our cooling water pump close to the motors and regulators. The pump requires 2-3S (6-12V) battery, which are not included in the delivery.
Thus, you ensure optimal cooling even during any "downtime" on the water.
- Self-priming gear pump with splash-proof motor
- Motor holder made of 3mm GFK
- V2A fixing screws
Good to know!
Because of the high pressure, we recommend that all supply lines with our clip clamps (#1556) to prevent slipping. You also need 4mm silicon hose. This pump is suitable for electro- as well as gasoline engines.
Important installation instructions
It is not necessary to strongly tighten the mounting bolts for the water pump on the engine mount, as this can only cause damage to the plastic. Nevertheless, should a mishap happen, the pump is still securely fastened in the holder.
> Do you have any questions concerning this product?
|Total length:||80mm (3,15")|
|Width pump:||60,9mm (2,4")|
|Height pump:||50mm (1,97")|
|Operating voltage:||6 - 12 V|
|Current consumption:||6,6V (2S Life) 0,68A 11,1V (3S LiPo) 0,88A|
|Output:||6,6V - 1,1l/min 11,1 V - 1,9l/min|
|Weight incl. motor mount:||156g|
No minimum order quantity. Check shippment costs here.
We do accept payment by paypal and bank transfer. Credit card payment through paypal is also accepted.
Queries? Please contact us anytime by using our contact form.