Rudder | Double steering | Bundle Box | Several versions
€70.00*
% instead of €87.00* single purchase price (19.54% saved)
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
1084-BB-155
Shipping weight/volume:
0.5 kg
Available stock:
2
Product information "Rudder | Double steering | Bundle Box | Several versions"
Bundle box for fast and easy assembly - Rudder with double steering
Suitable for your boat between 100-160cm (39,37" - 62,99").
Suitable for your boat between 100-160cm (39,37" - 62,99").
Thats included
The advantages at a glance:
- Both sided rudder linkage device
- Universal usable
- The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage
Good to know
A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.
| Total length: | 165mm (6,5") |
|---|---|
| Flange size: | 32x40mm (1,26 x 1,57") |
| Rudder bracket depth: | 55mm (2,17") |
| Total length rudder blade: | 155mm (6,10") |
| Thickness rudder blade: | 5mm (0,20") |
| Weight: | 123g |
| Color: | Anodized black + Silver |
| Material: | Aluminium 7075 |
Rudder | Double steering | Bundle Box | Several versions
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Rudder steering | Linkage set | Several versions
Thread:
M3
Remain on trackWith our rudder linkage, direct and precise control of the rudder is no problem. The connection with the rudder is done by ball heads which can be easily connected to the steering device of your rudder.That's included2 x brass guide tube 2 x stainless steel cable with threaded bush 2 x ball heads 2 x linkage connection How is it done?You need a 3.2mm hole. The brass tube is inserted into this and sealed from the inside with polymer adhesive. We recommend to grease the flex shaft with flex shaft grease before mounting. Due to the fitting accuracy of brass tube and flexible shaft as well as the lubrication with flex shaft grease, the entry of water is reliably prevented. Additionally you may also use rubber seals.Good to knowFor a secure fit, we recommend attaching the brass guide tube to the side of the servo holder. For this purpose, polymer adhesive is suitable.
from €18.00*
MTI | CT-03 2.0 | Catamaran | 1704mm (66,9") | Several versions
Material :
GFK
Successor to the popular CT-03By popular demand, we've breathed new life into the CT-03. This is how the CT-03 presents the underwater hull and the excellent handling characteristics associated with it. The upper water ship is inspired by the MTI catamarans.
In the original, these 2x 8-10 cylinder engines with blower (roots compressor) are used. These are housed in the elevations on the side next to the cabin.The advantages at a glance Underwater hull of the CT-03 for optimal handling Surface ship in the design of the MTI With implied niches for exhaust and window framesThat fits Suitable for combustion engines from 26ccm (2x) and 2x RCMK 600 Twin Suitable for 50 internal and external rotor electric motors Construction as double drive Good to know The center of gravity for the body is 34-38% seen from the stern Laminated in the sandwich process, "wet in wet" (1 layer 100 GFK + 1 layer 160 GFK + optionally 1 layer C-AFK or CFK + 1 layer 100 GFK)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €699.00*
Kiton | Monoboat | 1490mm (58,66") | Several versions
Material :
C-AFK
Hommage scale (1:10) of the legendary Italian offshore racing boat of the shipyard Meta MarineOur KITON unites, like no other monoboot, both elegance and excellent driving characteristics and is therefore suitable for both scalefans and racing professionals. In contrast to the original, we have only indicated the steps. In this way, our Kiton is easier to handle (especially in curves) and suitable for any water and speed.The advantages at a glancePerfect cobination of scale look and excellent drivingConstruction with rudder strut set or Trimax possibleSuitable for both 40 and 50 internal and external rotor motorsSuitable for gasoline engines with 26-30ccm Good to knowThe center of gravity for building is 26-30% The bracket (rear) has to be mounted by yourself - To do this, mark the area, degrease, sand and apply with epoxy resin or polymer glueManufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 C-AFK + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €430.00*
Cobra Shovelnose | 1150mm (45,3")
Often copied, never reached!The scale GFK replica of the Cobra round nose racing boat of the 70s, by Georgo Merlotti, is the right round nose for top speeds. With a fin and a well-coordinated setup, cornering is not a problem. The Cobra round nose can develop its handling characteristics best in smooth but also slightly rough water. The advantages at a glance Round nose also for high speeds and cornering Optimum combination of scale appearance and good driving characteristics That fits Suitable for rudder strut drives Suitable for 50 internal and external rotor electric motors Suitable for combustion engines up to 26ccm Good to know The center of gravity for the assembly is 3 cm behind the tear-off edge of the floatProduction in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
€325.00*
%
Cobra Shovelnose | 1150mm (45,3") | Bundle Box
With the bundle box, the right parts are right at hand With our bundle box, you have all the important installation parts for a quick and uncomplicated assembly at hand. Get on the water faster and save money (compared to the individual purchase price). Assembling the Cobra on your own also makes sure every item is placed just the way you want it. If you have questions during assembly, you are welcome to contact us at any time.Often copied, never reached!The scale GFK replica of the Cobra round nose racing boat of the 70s, by Georgo Merlotti, is the right round nose for top speeds. With a fin and a well-coordinated setup, cornering is not a problem. The Cobra round nose can develop its handling characteristics best in smooth but also slightly rough water. Thats included1 x Cobra 1150mm | 17351 x Rudder Strut Set Midi | 1068-RS.1351 x Flex shaft 6,35mm (1/4") | 10051 x Brass PTFE tube | 10031 x Water inlet | 17911 x Water outlet | 17952 x Rubber cuff | 16461 x Rudder Steering | 1833.12 x Siliconhose | 15521 x Clips | 15562 x Batterie mount | 21291 x Servomount | 1674-AS21 x Scorpion 4035 | 2135-W1 x Motor mount | 2135-M1 x Coupling | 1023-81 x ESC mount | 1631-ESCThat fitsSuitable for 200-240A ESC and 5-8SWe recommend to use a fin (not part of our sortiment)Good to know The center of gravity for the assembly is 3 cm behind the tear-off edge of the floatProduction in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
€790.00*
instead of
€844.80*
single purchase price (6.49% saved)
Cobra Shovelnose | 1150mm (45,3") | ARTR
Your dream boat including assembly A fast and easy solution if you dont have the time to do assembly on your own. Take advantage of the reduced bundle box price and get all listed parts assembled to your Mystic. Also included is fitting motorization. You just have to add ESC, batterie, propeller and servo of your choice to be ready to go to the lake.
Often copied, never reached!The scale GFK replica of the Cobra round nose racing boat of the 70s, by Georgo Merlotti, is the right round nose for top speeds. With a fin and a well-coordinated setup, cornering is not a problem. The Cobra round nose can develop its handling characteristics best in smooth but also slightly rough water. Thats included1 x Cobra 1150mm | 17351 x Rudder Strut Set Midi | 1068-RS.1351 x Flex shaft 6,35mm (1/4") | 10051 x Brass PTFE tube | 10031 x Water inlet | 17911 x Water outlet | 17952 x Rubber cuff | 16461 x Rudder Steering | 1833.12 x Siliconhose | 15521 x Clips | 15562 x Batterie mount | 21291 x Servomount | 1674-AS21 x Scorpion 4035 | 2135-W1 x Motor mount | 2135-M1 x Coupling | 1023-81 x ESC mount | 1631-ESCAssembly of all included partsThat fitsSuitable for 200-240A ESC and 5-8SWe recommend to use a fin (not part of our sortiment)Good to know The center of gravity for the assembly is 3 cm behind the tear-off edge of the floatProduction in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
€1,190.00*