Coupling | Flex shaft & Co.

Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Left

Highest quality for highest demandsWith our flex shaft your project will have no limitThe advantages at a glance:High quality for high power setups4,75mm (3/16") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.

€16.50*

Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Right

€16.50*

Flex shaft | 6,35mm (1/4") | 67cm (26,38") | Left | Square end

Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:Swiss quality for high power setupsIntegrated gold wire so rotation direction is shown right away 6,35mm (1/4") diameterSquared end on one side - can be removed for usage with collet clutchProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.

Content: 0.67 Running meter (€20.90* / 1 Running meter)

€14.00*

Flex shaft | 6,35mm (1/4") | 100cm (39,37") | Left

€22.00*

Flex shaft | 6,35mm (1/4") | 67cm (26,38") | Right | Square end

Content: 0.67 Running meter (€20.90* / 1 Running meter)

€14.00*

Flex shaft | 6,35mm (1/4") | 100cm (39,37") | Right

€22.00*

Flex shaft | Set | 4,75mm (3/16") | L+R

Easy and fast solutionWith our flex shaft set you get a suitable and uncomplicated solution for your boat with 4,75mm (3/16") twin drive.That's included:Flex shaft left 4,75mm (3/16")Flex shaft right 4,75mm (3/16") 2 x Brass PTFE tube 7mm (0,28")How its doneFor best grip, we recommend sanding the flex shaft before assembly, degreasing it and then gluing it into the prop shaft with Loctite.

€26.90*

Flex shaft | Set | 6,35mm (1/4") | L+R

Easy and fast solutionWith our flex shaft set you get a suitable and uncomplicated solution for your boat with 6,35mm (1/4") twin drive.That's included:Flex shaft left 6,35mm (1/4")Flex shaft right 6,35mm (1/4") 2 x Brass PTFE tube 10mm (0,39")How its doneFor best grip, we recommend sanding the flex shaft before assembly, degreasing it and then gluing it into the prop shaft with Loctite.

€30.00*

Brass PTFE Hose | Steven pipe | 7mm (0,27") | 30cm (11,81") length

Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 4,75mm (3/16") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently.

€8.00*

Brass PTFE Hose | Steven pipe | 10mm (0,39") | 30cm (11,81") length

Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 6,35mm (1/4") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently.

€8.60*

Brass PTFE Hose | Steven pipe | 10mm (0,39") | 100cm (39,37") length

Protection for your flex shaftOur brass- PTFE hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 6,35mm (1/4") flex shaftGreasy PTFE material avoids friction between flex shaft and brass pipe Thats how its done We recommend to grease your flex shaft frequently.

€29.90*

Flex shaft set | Mystic 840mm | Prop + Flex shaft | 4,75mm (3/16")

Quick and easyThis set is perfect for quick and easy change of your Mystic 1140mm drive prop shafts. No more sanding, degreasing, gluing and hours of waiting. This shaft set is ready for usage so you are back on the water right away. Thats included:2 prop shafts with drive dog1 flex shaft 4,75mm (3/16") left - already glued to prop shaft1 flex shaft 4,75mm (3/16") right - already glued to prop shaftGood to knowThe flex shafts are much longer than needed on purpose. This way you are able to simply shorten them to required size and collect to your collet clutch directlyWe recommend a distance of 1,5mm between drive dog and drive body

€80.00*

Adapter | Square end | Flex shaft 6,35mm (1/4")

You need square end on both sides?Our adapter will help you out. Just connect with the round end of your flex shaft. This way you have square end on both sides according to your requirements. The advantages at a glanceBoth side square end for your flex shaft according to your requirementsSuitable for 6,35mm (1/4") flex shaftThats how its doneWe recommend to grind down and degrease the flex shaft before gluing process. Further we recommend to use Loctite for secure bonding.

€13.00*

Flex shaft set | Mystic 1140mm | Prop + Flex shaft | 4,75mm (3/16")

€98.00*

Flex shaft set | Mystic 1380mm | Prop + Flex shaft | 6,35mm (1/4")

Quick and easyThis set is perfect for quick and easy change of your Mystic 1380mm drive prop shafts. No more sanding, degreasing, gluing and hours of waiting. This shaft set is ready for usage so you are back on the water right away. Thats included:2 prop shafts with drive dog1 flex shaft 6,35mm (1/4") left - already glued to prop shaft1 flex shaft 6,35mm (1/4") right - already glued to prop shaftGood to knowThe flex shafts are much longer than needed on purpose. This way you are able to simply shorten them to required size and collect to your collet clutch directly.

€98.00*

Flex shaft set | Mystic 1850 - 1890mm | Prop + Flex shaft | 6,35mm (1/4")

Quick and easyThis set is perfect for quick and easy change of your Mystic 1850 - 1890mm drive prop shafts. No more sanding, degreasing, gluing and hours of waiting. This shaft set is ready for usage so you are back on the water right away. Thats included:2 prop shafts with drive dog1 flex shaft 6,35mm (1/4") left - already glued to prop shaft1 flex shaft 6,35mm (1/4") right - already glued to prop shaftGood to knowThe flex shafts are much longer than needed on purpose. This way you are able to simply shorten them to required size and collect to your collet clutch directly.

€98.00*

Support | Steven pipe | Brass pipe | 7mm (0,28")

Securing the brass - PTFE tubeThe advantages at a glance Securely mount the brass PTFE tube in your boat Height individually adjustable The flex shaft is prevented from swinging up Manufactured from high-strength aluminum 7075How its doneFor easy assembly, we recommend using polymer glue. To do this, degrease the fuselage at the required point using brake cleaner and then glue in the stern tube holder.

€16.00*

Support | Steven pipe | Brass pipe | 10mm (0,39")

€17.00*

PTFE Pipe | 6 - 5,5mm (0,23 - 0,21") | 100cm (39,37")

Quality from GermanyPTFE is a slightly greasy material and prevents friction between flex shaft and brass pipe. The advantages at a glancehigh quality PTFE for high rpm suitable for 4,75mm (3/16") flex shaft Thats how its doneWe recommend to use boat grease for your flex shaft as additional greasing.

€8.50*

PTFE Pipe | 9 - 7mm (0,35 - 0,28") | 100cm (39,37")

Quality from GermanyPTFE is a slightly greasy material and prevents friction between flex shaft and brass pipe. The advantages at a glancehigh quality PTFE for high rpm suitable for 6,35mm (1/4") flex shaft Thats how its doneWe recommend to use boat grease for your flex shaft as additional greasing.

€12.00*

Safety clamp | Flex safety | 4,75mm (3/16")

How to avoid lost of propeller?Without our safety clamp it happens fast. Your boat hits a piece of driftwood or similair at the water and what should be a day by the water ends up with the lost of your flex shaft and propeller. The solution? Our safety clamp is screwed on to your flex shaft. In case of collision neither the flex- propshaft nor your propellers will slip through the millings. The advantages at a glancePrecise security of your flex shaft to avoid lost of propeller2 Parted versionMade of high quality aluminium 7075Good to knowSince this flex safety contains of 2 parts, your flex can be secured much better (tighter) than by one piece flex safety.

€6.00*

Safety clamp | Flex safety | 6,35mm (1/4")

€6.00*

Flex safety | 4,75mm (3/16")

Security and thrust bearingThe advantages at a glance The ball bearing in the flex shaft lock prevents vibrations and also serves as a thrust bearing The two-piece retaining ring guarantees precise attachment Manufactured from high-strength aluminum 7075That's how it's done Slide the flex shaft lock over the brass/PTFE tube Using a screwdriver or similar, mark the hole in the brass/PTFE tube through the opening for the grease nipple Take the flex shaft lock from the brass/PTFE tube and drill the hole in the tube at the marked point You can then mount the flex shaft lock completely on the brass/PTFE tube and now conveniently grease the internal flex shaft using the grease nipple Good to knowRegular greasing of the flex shaft via the grease nipple significantly increases the durability of the material. We recommend using flex shaft grease for this.

€23.00*

Flex safety | 6,35mm (1/4")

€23.00*