Flex shaft | Set | 6,35mm (1/4") | L+R
€30.00*
Content:
1 Set
In stock, delivery time: 1-5 labor days**
Product number:
1672-F
Shipping weight/volume:
0.2 kg
Available stock:
1
Product information "Flex shaft | Set | 6,35mm (1/4") | L+R"
Easy and fast solution
With our flex shaft set you get a suitable and uncomplicated solution for your boat with 6,35mm (1/4") twin drive.
With our flex shaft set you get a suitable and uncomplicated solution for your boat with 6,35mm (1/4") twin drive.
That's included:
- Flex shaft left 6,35mm (1/4")
- Flex shaft right 6,35mm (1/4")
- 2 x Brass PTFE tube 10mm (0,39")
How its done
For best grip, we recommend sanding the flex shaft before assembly, degreasing it and then gluing it into the prop shaft with Loctite.
Technical datas
| Length: |
ca. 300mm (11,81") |
|---|---|
| Diameter: | 6,35mm (1/4") |
| Rotation: | Left + Right |
| Material: | Steel, Brass, PTFE |
| Weight: | 233g |
Flex shaft | Set | 6,35mm (1/4") | L+R
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Drives | Mystic 1380mm | 6,35mm (1/4") | 1 Pair | Stinger drive
Sophisticated solutions for highest demandsSuitable stinger drives for your Mystic 1380mm and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds. Details at a glance Made of highest quality aluminium 7075 Black anodizing for great looks and protection against corrosion Special hydrodynamic profile Stainless steel prop shaft Salt water resistance Slight bearings ensure higher efficiency and low maintenance than ball bearings Washers made of PEEK material for much longer service time than PTFE and other materials. Good to knowThe drives do have an ajustable angle of +/-4° Tips for easy installation A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now. Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now.
For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us
€250.00*
Prop shaft | Mystic 1380mm | 6,35mm (1/4")
Because sometimes things dont work out as plannedNo problem with our spare prop shaft for your Mystic 1380mm, you are back at the water in a hurry. Good to knowIn order to prevent the loss of your propeller and prop shaft, we recommend to use our flex safety with bearings which keeps the prop shaft inside of the hull just in case.
€35.50*
Drives | Mystic 1850 - 1890mm | 6,35mm (1/4") | 1 Pair | Stinger drive
Sophisticated solutions for highest demandsSuitable stinger drives for your Mystic 1850-1890mm and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds. Details at a glance Made of highest quality aluminium 7075 Black anodizing for great looks and protection against corrosion Special hydrodynamic profile
Stainless steel prop shaft Salt water reistance Slight bearings ensure higher efficiency and low maintenance than ball bearings Washers made of PEEK material for much longer service time than PTFE and other materials. Good to knowThe drives do have an ajustable angle of +/-4° Tips for easy installation A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now. Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now.
For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us
€300.00*
Prop shaft | Mystic 1850 1890mm | 6,35mm (1/4")
Because sometimes things dont work out as plannedNo problem with our spare prop shaft for your Mystic 1850 - 1890mm, you are back at the water in a hurry. Good to knowIn order to prevent the loss of your propeller and prop shaft, we recommend to use our flex safety with bearings which keeps the prop shaft inside of the hull just in case.
€35.50*
Drives | Kiton | CT-03 | 6,35mm (1/4") | 1 Pair
Sophisticated solutions for highest demands
Suitable drives for your Kiton as well as CT-03 and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds. Details at a glanceMade of highest quality aluminium 7075 Black anodizing for great looks and protection against corrosionSpecial hydrodynamic profileStainless steel prop shaft Salt water reistanceSlight bearings ensure higher efficiency and low maintenance than ball bearingsWashers made of PEEK material for much longer service time than PTFE and other materials. Good to knowThe drives do have an ajustable angle of +/-4°Tips for easy installation A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now. Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now. For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us
€250.00*
Support | Steven pipe | Brass pipe | 10mm (0,39")
Securing the brass - PTFE tubeThe advantages at a glance Securely mount the brass PTFE tube in your boat Height individually adjustable The flex shaft is prevented from swinging up Manufactured from high-strength aluminum 7075How its doneFor easy assembly, we recommend using polymer glue. To do this, degrease the fuselage at the required point using brake cleaner and then glue in the stern tube holder.
€17.00*
Flex safety | 6,35mm (1/4")
Security and thrust bearingThe advantages at a glance The ball bearing in the flex shaft lock prevents vibrations and also serves as a thrust bearing The two-piece retaining ring guarantees precise attachment Manufactured from high-strength aluminum 7075That's how it's done Slide the flex shaft lock over the brass/PTFE tube Using a screwdriver or similar, mark the hole in the brass/PTFE tube through the opening for the grease nipple Take the flex shaft lock from the brass/PTFE tube and drill the hole in the tube at the marked point You can then mount the flex shaft lock completely on the brass/PTFE tube and now conveniently grease the internal flex shaft using the grease nipple Good to knowRegular greasing of the flex shaft via the grease nipple significantly increases the durability of the material. We recommend using flex shaft grease for this.
€23.00*