PTFE Pipe | 9 - 7mm (0,35 - 0,28") | 100cm (39,37")

€12.00*

Content: 1 Running meter

Prices incl. VAT plus shipping costs

In stock, delivery time: 1-5 labor days**

Product number: 1088

Shipping weight/volume: 0.2 kg

Available stock: 40

Product information "PTFE Pipe | 9 - 7mm (0,35 - 0,28") | 100cm (39,37")"

Quality from Germany

PTFE is a slightly greasy material and prevents friction between flex shaft and brass pipe.

The advantages at a glance

high quality PTFE for high rpm
suitable for 6,35mm (1/4") flex shaft

Thats how its done

We recommend to use boat grease for your flex shaft as additional greasing.

Technical datas

Inner diamater:	7mm (0,28")
Outer diamater:	9mm (0,35")
Length:	100cm (39,37")
Wall thickness:	2mm (0,08")
Material:	PTFE

PTFE Pipe | 9 - 7mm (0,35 - 0,28") | 100cm (39,37")

Product safety information:

Manufacturer:

Wolf-Technik eK – VKL
Kölner Straße 36
(Gewerbegebiet Hallschlag)
70376 Stuttgart | Germany
E-Mail: wolf@fluorkunststoffe.de

That fits

Flex shaft | 6,35mm (1/4") | 67cm (26,38") | Left | Square end

Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:Swiss quality for high power setupsIntegrated gold wire so rotation direction is shown right away 6,35mm (1/4") diameterSquared end on one side - can be removed for usage with collet clutchProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.

Content: 0.67 Running meter (€20.90* / 1 Running meter)

€14.00*

Flex shaft | 6,35mm (1/4") | 67cm (26,38") | Right | Square end

Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:Swiss quality for high power setupsIntegrated gold wire so rotation direction is shown right away 6,35mm (1/4") diameterSquared end on one side - can be removed for usage with collet clutchProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.

Content: 0.67 Running meter (€20.90* / 1 Running meter)

€14.00*

Support | Steven pipe | Brass pipe | 10mm (0,39")

Securing the brass - PTFE tubeThe advantages at a glance Securely mount the brass PTFE tube in your boat Height individually adjustable The flex shaft is prevented from swinging up Manufactured from high-strength aluminum 7075How its doneFor easy assembly, we recommend using polymer glue. To do this, degrease the fuselage at the required point using brake cleaner and then glue in the stern tube holder.

€17.00*

Flex safety | 6,35mm (1/4")

Security and thrust bearingThe advantages at a glance The ball bearing in the flex shaft lock prevents vibrations and also serves as a thrust bearing The two-piece retaining ring guarantees precise attachment Manufactured from high-strength aluminum 7075That's how it's done Slide the flex shaft lock over the brass/PTFE tube Using a screwdriver or similar, mark the hole in the brass/PTFE tube through the opening for the grease nipple Take the flex shaft lock from the brass/PTFE tube and drill the hole in the tube at the marked point You can then mount the flex shaft lock completely on the brass/PTFE tube and now conveniently grease the internal flex shaft using the grease nipple Good to knowRegular greasing of the flex shaft via the grease nipple significantly increases the durability of the material. We recommend using flex shaft grease for this.

€23.00*