Scorpion HK-7455-340KV - V2 | 24KW | Water cooled | Outrunner
€999.00*
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
2138-W
Shipping weight/volume:
2.2 kg
Available stock:
1
Product information "Scorpion HK-7455-340KV - V2 | 24KW | Water cooled | Outrunner"
New version of the special MHZ- Scorpion engines
The V2 version of the 7455 series comes now with new winding and a new type of integrated double helix water cooling. Because of it, the motor is even more efficient and durable.
The advantages at a glance
- V2 version of outrunner motor with even higher efficiency (compared to inrunner motors with similar performance)
- New direct double helix water cooling
- Both sided motor shaft for high stability and less vibration
- 20 Neodym magnet poles | 100% identic
- 2 x 1,4 mm winding
- Large ball bearings for high stability and long service life
- 4 screws M5 included to delivery
Good to know
- This motor requires a programmable ESC such as the MGM 40063-3 ESC or a different ESC with exact same technical datas.
That fits
- Monoboat > 2m | 1 Motor | 2 Drives | Gear box | 12-14S | 2-3 Blade Propeller | Pitch 1.4 - 1,6 | Diameter 70-75mm
- Catamaran > 2m | 2 Motors | 12-14 S | 3-4 Blade Propeller | Pitch 1.4 - 1.6 | 75-80mm
- Surfboards or other water crafts
- Suitable ESC MGM 40063-3 or similair
Technical details
| Motor Diameter: | 86mm |
|---|---|
| Stator Diameter: | 74mm |
| Stator Length: | 55mm |
| Magnet Poles: | 20 |
| Motor KV: | 342KV |
| Max. Rotation: | 20.000 upm |
| Max. frequent current: | 15.000W (15KW) |
| Max. peak current: | 24000W (24KW) |
| No load current: | 9,85A |
| Max. V: | 60V |
| Continuous A: | 260A |
| Max. peak A: | 400A |
| Weight: | 2200g |
| Diameter motor shaft: | 12mm (beidseitig) |
| Length shaft: | 40mm vorn | 14,5mm hinten |
| Total length: | 113mm |
| Motor Timing: | 24 - 30° (Autotiming) |
| Attachment diameter: | 45mm (6xM5) |
| Max. Lipo: | 14 |
| Frequency: | 16KHz |
| Winding: | 2 x 1,4 mm |
| Torque: | 7,6Nm |
| Material: | Aluminium | Steel |
Scorpion HK-7455-340KV - V2 | 24KW | water cooled | Outrunner
Scorpion Power System Ltd.
16th Floor, Excelsior Industrial Building,
68-76 Sha Tsui Road,
Tsuen Wan, New Territories, Hong Kong
Email: support@spihk.com
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Product safety information
Manufacturer:
Scorpion Power System Ltd.
16th Floor, Excelsior Industrial Building,
68-76 Sha Tsui Road,
Tsuen Wan, New Territories, Hong Kong
Email: support@spihk.com
Responsible person:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Motor mount | Scorpion 7455 | Aluminium 7075
High performance requires a solid attachmentThis motor mount was made to fit our MHZ-Scorpion 7455-320KV motorThe advantages at a glance Perfect fit for our Scorpion 7455 Manufactured from high strength 11mm (0,43") thick aluminum 7075 Double bracket for perfect attachment and low vibration Rear plate of the engine mount with 12x28 -2RS ball bearing, which does not need to be greased and ensures that no radial forces act on the motor. Front motor mount does not require an extra ball bearing as this is already integrated in the front axle of the motor 8mm long, oval recesses for mounting at motor mount baseThats includedFront motor supportBack motor support6 x cylinder screws M5 x 18mm6 x washers
€76.00*
Taboo | 2080mm (82")
Replica of the Fountain racing boat of the American Superboat and OSS racing classThe large and sleek Taboo has in contrast to the original Fountain no steps and therefore has an optimal handling in curves. Its beautiful driving image shows this monoboot both in smooth water and on the open sea and at speeds of up to 110km / h.The advantages at a glance:Beautiful driving image Suitable for 50er in- and outrunner motorsSuitable for gasoline engines with up to 50ccm Several setup option such as Z-drives, rudder strut sets, trimaxes.....Good to knowThe center of gravity for construction is 35% Manufactured using the "wet in wet" sandwich process (1 layer 100 GFK + 1 layer 160 GFK+ 1 layer 100 GFK)
Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €1,160.00*
Reckless | Offshore boat | 1850mm (72,83")
The offshore boat chameleonBased on our experience with the No Mercy, the hull was stretched by 270mm, making it visually even more elegant. The result is an offshore boat with excellent handling characteristics, even with rough water and virtually unlimited construction possibilities.The advantages at a glance:Excellent driving qualitySuitable for 50er in- and outrunner motorsSuitable for gasoline engines with up to 32ccm Several setup option such as Z-drive, rudder strut set, trimax.....Good to knowThe center of gravity for construction is 26-30% Manufactured using the "wet in wet" sandwich process (1 layer 100 GFK + 1 layer 160 GFK+ 1 layer 100 GFK)
Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €1,100.00*
GTX | Offshore boat | 1810mm (71,23")
Hommage to the original GTX SV50 OuterlimitsDesigned by Mike Fiore, founder of Outerlimits Inc. Ernest likes to remember his ride with him in 2013 in an open SV48 from Key West to Cuba. However, stopped by not amused Coast Guard. Unfortunately, Mike died in 2014 trying to set a record at over 170mph (270km / h). His father later took over the company and started to optimize aerodynamics and hydrodynamics on the computer. Today Outerlimits produces racing boats witht a speed of over 180mph (280Km / h). Our GTX model boat is based on the original datas and therefore impresses with its excellent driving characteristics.The advantages at a glance:Excellent driving qualitySuitable for 50er in- and outrunner motorsSuitable for gasoline engines with up to 32ccm Several setup option such as Z-drive, rudder strut set, trimax.....Good to knowThe center of gravity for construction is 26-28% Manufactured using the "wet in wet" sandwich process (1 layer 100 GFK + 1 layer 160 GFK+ 1 layer 100 GFK)
Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €840.00*
%
GTX | Offshore boat | 1810mm (71,23") | Bundle Box
Hommage to the original GTX SV50 OuterlimitsDesigned by Mike Fiore, founder of Outerlimits Inc. Our GTX model boat is based on the original datas and therefore impresses with its excellent driving characteristics.Thats included1x GTX Offshore boat | 16962x Strut | 1075-L2x Hull passage | 1070-1.31x Rudder Maxi | 10691x Flex shaft | 10051x Flex shaft | 1005-R2x Brass PTFe pipe | 10032x Steven pipe support | 10112x Flex safety | 22561x Rudder steering | 1833.12x Rubber cuff | 16492x Water inlet | 17912x Water outlet | 17952x Silicon hose | 15522x Clips | 15562x Batterie mount | 21292x Motor mount | 24131x Servo mount | 1767-AS2The advantages at a glance:Excellent driving qualitySuitable for 50er in- and outrunner motorsSuitable for gasoline engines with up to 32ccm Several setup option such as Z-drive, rudder strut set, trimax.....Good to knowThe center of gravity for construction is 26-28% Manufactured using the "wet in wet" sandwich process (1 layer 100 GFK + 1 layer 160 GFK+ 1 layer 100 GFK)
Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €1,350.00*
instead of
€1,420.00*
single purchase price (4.93% saved)
Elastic coupling | Configurator
Configurator:
Segment - 8mm (0,31") Inner diameter
Custom made clutchWith our kit you can put together your coupling individually and precisely for your project. Choose not only between different sizes but also between different degrees of hardness The advantages at a glance Coupling precisely CNC machined from the highest quality aluminum 7075100% centric, absolutely accurate and maintenance-free High resilience with 98 Shore hardness The shaft is secured with an M5 grub screw Create the clutch according to your specifications
from €7.00*
Secure clips | Hose holder | 4pcs.
For a clean and safe assemblyWith the clip clamp you secure your silicone or other hoses and thus ensure a clean and clear structure.The advantages at a glanceBetter securing of the silicone hose on cooling water nipplesEasily mountable and dismountableFor a clean and safe assembly
€3.60*
Silicon hose | 4mm (0,16") | 1 Meter (39,37")
Quality from GermanyHigh quality silicone tubing for a reliable setupThe advantages at a glanceVery good resistance to alkalis, diluted acids, cleaning agents, etc.Weather and aging resistant, ozone resistant, steam sterilizable and physiologically harmlessOperating temperature ranges from -60° to +200° CBfR XV. and FDA § 177.2600 compliantDimensional tolerances according to the DIN ISO 3302-1 standardSuitable for methanol fuels or cooling water.
€4.90*