Turn Fin | Left + Right | 1 Pair | S
€8.90*
Content:
1 Pair
In stock, delivery time: 1-5 labor days**
Product number:
2504
Shipping weight/volume:
0.1 kg
Available stock:
7
Product information "Turn Fin | Left + Right | 1 Pair | S"
Little helper - large impact
With this pair of turn fins you will have more stable driving of your hull. The set includes one pair (left + right turn fin)
That fits
Suitable for hulls with 30-65cm length
Good to know
Turn Fins are especially a good choice if rudder and strut are placed below each other. This way you will have more stable curve driving.
| Length: | 55mm (2,17") |
|---|---|
| Width incl. flange: | 25mm (0,98") |
| Width excl. flange: | 21mm (0,83") |
| Height adjustable: | 11mm (0,43") |
| Attachment flange: | 18x10mm (0,71 x 0,39") |
| Material: | Aluminium |
| Includes: | 1 pair left | right + attachment screws |
Turn Fins | Left + Right | S
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Gecko | 340mm (13,39") | Monoboat | Several versions
Boot Style:
GFK
Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and maneuverable for optimal handling Suitable for rigid shaft and M4 propeller or flex shaft Suitable for small engines (24-32mm) and 3-4S Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The Gecko mono boat will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €49.00*
Micro Shovelnose | 385mm (15,2") | Shovelnose
Boot Style:
GFK
Don`t be fooled by the sizeThe small micro round nose is one of a kind and is therefore more suitable for advanced and professionals. Its high maneuverability and speed shows this shovelnose on smooth water. Speeds of 100Km / h are no problem here.The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling Suitable for rigid shaft and M4 propeller or flex shaft Suitable for small engines (24-32mm) and 2-4S Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €58.00*
Mamba | 390mm (15,35") | Monoboat | Several versions
Boot Style:
GFK
Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling Suitable for rigid shaft and M4 propeller or flex shaft Suitable for small engines (24-32mm) and 3-4S Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The hull will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €60.00*
Harpoon | 430mm (16,93") | Monoboat
Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling Suitable for rigid shaft and M4 propeller or flex shaft Suitable for small engines (24-32mm) and 3-4S Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The hull will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €77.00*
Hydroplane | 435mm (17")
Boot Style:
GFK
Semi scale replica of the Miss Madison HydroplaneThe hydroplane made of GFK unfolds its driving characteristics best on smooth water. Speed of more than 100Km/h is no problem for this hull.The advantages at a glance Low construction costs | Short set-up time Perfect for smooth water Suitable for small engines (24-32mm), 3000-4000 rpm, 2-3S Good to know The center of gravity is 2cm behind trailing edge of the floatManufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €100.00*
Speedstar | 530mm (20,9") | Monoboat | Several versions
Boot Style:
GFK
Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling Suitable for rigid shaft and M4 propeller or flex shaft Suitable for small engines (24-32mm) and 3-4S Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The hull will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €89.00*
%
Speedstar | 530mm (20,9") | Bundle Box | Several versions
Boot Style:
GFK
Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling That`s included
1x Speedstar 1703-S 1x Rudder with water intake and steering 1078 1x Strut set + propeller 1077 1x Clips 1556 1x Silicon hose1x Motor mount 15531x Batterie mount 2128 1x ESC mount 1631-ESC 1x Rubber cuff with hull passage 1649 1x Water outlet 1795Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The Speedstar mono boat will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €175.00*
instead of
€197.60*
single purchase price (11.44% saved)
%
Shockwave | 635mm (25") | Bundle Box | Several versions
Boot Style:
GFK
Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling That`s included
1x Shockwave 17261x Rudder with water intake and steering 1078 1x Strut set + propeller 1077 1x Clips 1556 1x Silicon hose1x Motor mount 15531x Batterie mount 2128 1x ESC mount 1631-ESC 1x Rubber cuff with hull passage 1649 1x Water outlet 1795Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The Speedstar mono boat will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €189.00*
instead of
€213.60*
single purchase price (11.52% saved)
Shockwave | 635mm (25") | Monoboat | Several versions
Boot Style:
GFK
Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling Suitable for rigid shaft and M4 propeller or flex shaft Suitable for small engines (24-32mm) and 3-4S Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The boat will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €106.00*