Hydraulic dummie
€19.00*
Content:
1 Set
In stock, delivery time: 1-5 labor days**
Product number:
2206
Shipping weight/volume:
0.1 kg
Available stock:
18
Product information "Hydraulic dummie"
A visual highlight
This hydraulic dummy simulates the original scale look and is intended as a visual supplement for the actual linkage set.
The advantages at a glance
- Arm length adjustable 75-109mm
- Made of high-strength aluminum 7075
- Threaded rod stainless steel
- Anodized black as protection against corrosion
That's included
- 2x hydraulic dummy (left | right)
- 2x ball heads
- 2x screw M2.5
- 2x stop nut M2.5
| Total length: | 75-130mm (3,35 - 5,12") |
|---|---|
| Flange: | 25x22mm (0,98x0x87") |
| Material: | Aluminium 7075 | Thread stainless steel |
| Color: | Anodized black |
Hydraulic dummie
Product safety information
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Rudder | Mystic 1380mm (54,33") | C5000
Rudder with double steering and many featuresSuitable for your Mystic 1380mm.The advantages at a glance: Two-sided rudder linkage device Black anodizing for added protection against corrosion The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Good to knowA little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.
€150.00*
Rudder | Mystic 1850-1890mm (72,8 - 74,4") | C5000
Rudder with double steering and many featuresSuitable for your Mystic 1850 - 1890mm (72,8 - 74,4").The advantages at a glance: Two-sided rudder linkage device Black anodizing for added protection against corrosion The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Good to knowA little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.
€180.00*
Rudder steering | Linkage set | Several versions
Thread:
M3
Remain on trackWith our rudder linkage, direct and precise control of the rudder is no problem. The connection with the rudder is done by ball heads which can be easily connected to the steering device of your rudder.That's included2 x brass guide tube 2 x stainless steel cable with threaded bush 2 x ball heads 2 x linkage connection How is it done?You need a 3.2mm hole. The brass tube is inserted into this and sealed from the inside with polymer adhesive. We recommend to grease the flex shaft with flex shaft grease before mounting. Due to the fitting accuracy of brass tube and flexible shaft as well as the lubrication with flex shaft grease, the entry of water is reliably prevented. Additionally you may also use rubber seals.Good to knowFor a secure fit, we recommend attaching the brass guide tube to the side of the servo holder. For this purpose, polymer adhesive is suitable.
from €18.00*
Rudder steering | Linkage set | Several versions
Thread:
M2,5
Remain on trackWith our rudder linkage, direct and precise control of the rudder is no problem. The connection with the rudder is done by ball heads which can be easily connected to the steering device of your rudder.That's included2 x brass guide tube 2 x stainless steel cable with threaded bush 2 x ball heads 2 x linkage connection How is it done?You need a 3.2mm hole. The brass tube is inserted into this and sealed from the inside with polymer adhesive. We recommend to grease the flex shaft with flex shaft grease before mounting. Due to the fitting accuracy of brass tube and flexible shaft as well as the lubrication with flex shaft grease, the entry of water is reliably prevented. Additionally you may also use rubber seals.Good to knowFor a secure fit, we recommend attaching the brass guide tube to the side of the servo holder. For this purpose, polymer adhesive is suitable.
from €18.00*