Rudder Strut Set | Maxi | 6,35mm (1/4")

€150.00*

Content: 1 Piece

Prices incl. VAT plus shipping costs

In stock, delivery time: 1-5 labor days**

Length rudder blade

135mm (5,31")

155mm (6,10")

Product number: 1069-RS-155

Shipping weight/volume: 0.5 kg

Available stock: 5

Product information "Rudder Strut Set | Maxi | 6,35mm (1/4") "

Universal complete system for your boat from 150cm (59,1")

The advantages at a glance:

Two-sided rudder linkage device
Height adjustable strut
Waterproof, clean finish with rubber sleeve guide
Black anodizing for added protection against corrosion
Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof
The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage
Rudder blade available in several lengths

Thats included:

Rudder - strut system with linkage levers on both sides
Thrust washer made of PEEK material

Good to know

We recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.

For further questions please contact us

Total length:	193mm (7,6")
Flange size:	80x30mm (3,15 x 1,18")
Total length rudder blade:	155mm (6,10")
Thickness rudder blade:	5mm (0,20")
Length outrigger:	165mm (6,5")
Thickness outrigger:	12-22mm (0,47 - 0,87")
Total height:	135mm (5,31")
Total height stut :	90mm (3,54")
Total length strut with shaft:	105mm (4,13")
Prop shaft:	6,35mm (1/4")
Color:	Anodized black
Material:	Aluminium 7075

Rudder Strut Set | Maxi | 6,35mm (1/4")

Product safety information:

Manufacturer:

MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com

That fits

Flex shaft | 6,35mm (1/4") | 67cm (26,38") | Left

Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:Swiss quality for high power setupsIntegrated gold wire so rotation direction is shown right away 6,35mm (1/4") diameterSquared end on one side - can be removed for usage with collet clutchProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.

Content: 0.67 Running meter (€20.90* / 1 Running meter)

€14.00*

Flex shaft | 6,35mm (1/4") | 67cm (26,38") | Right

Content: 0.67 Running meter (€20.90* / 1 Running meter)

€14.00*

Brass PTFE Hose | Steven pipe | 10mm (0,39") | 100cm (39,37") length

Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 6,35mm (1/4") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently.

€23.00*

Brass PTFE Hose | Steven pipe | 10mm (0,39") | 30cm (11,81") length

€8.60*

Support | Steven pipe | Brass pipe | 10mm (0,39")

Securing the brass - PTFE tubeThe advantages at a glance Securely mount the brass PTFE tube in your boat Height individually adjustable The flex shaft is prevented from swinging up Manufactured from high-strength aluminum 7075How its doneFor easy assembly, we recommend using polymer glue. To do this, degrease the fuselage at the required point using brake cleaner and then glue in the stern tube holder.

€17.00*

Support | Steven pipe | Brass pipe | 10mm (0,39")

€16.50*

Flex safety | 6,35mm (1/4")

Security and thrust bearingThe advantages at a glance The ball bearing in the flex shaft lock prevents vibrations and also serves as a thrust bearing The two-piece retaining ring guarantees precise attachment Manufactured from high-strength aluminum 7075That's how it's done Slide the flex shaft lock over the brass/PTFE tube Using a screwdriver or similar, mark the hole in the brass/PTFE tube through the opening for the grease nipple Take the flex shaft lock from the brass/PTFE tube and drill the hole in the tube at the marked point You can then mount the flex shaft lock completely on the brass/PTFE tube and now conveniently grease the internal flex shaft using the grease nipple Good to knowRegular greasing of the flex shaft via the grease nipple significantly increases the durability of the material. We recommend using flex shaft grease for this.

€23.00*