Motor mount | Carbon | 40er Inrunner motors | Front support
€22.00*
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
2414-M
Shipping weight/volume:
0.1 kg
Available stock:
54
Product information "Motor mount | Carbon | 40er Inrunner motors | Front support"
Boat building made easy
This motor holder can be used as motor mount (usage of 2 pcs. required) or extra front support for your inrunner motor. Either way your boat is set up quickly with extra protection from vibration.
The advantages at a glance
- Can be sued either as motor mount (usage of 2pcs.) or extra front support of your inrunner motor
- The engine is optimally supported for less vibration
- Height and angle individually adjustable
- Smaller cut-outs on the rails ensure an optimal connection between boat and holder (We recommend using polymer glue)
- Required screws included to delivery as well
That's how it's done
- Degrease the motor mount (e.g. with brake cleaner) and glue it directly in the boat at the desired location
Technical datas
| Total height: | 52 - 64mm (2,05 - 2,52 ") |
|---|---|
| Total width: | 70mm (2,76") |
| Inner diameter: | 40mm (1,57") |
| Material motor mount ring: | Aluminium 7075 | Anodized black |
| Material side parts: | 2mm (0,08") Carbon |
| Included screws: | Screws 2 x M4x8 | Screws 2 x M3 x 8 + | 2 Washers 4mm |
Motor mount | Carbon | 40er Inrunner motors | Front support
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Water cooling jacket | 45 x 50mm (1,77 x 1,97") | Inrunner motors | 40er Series
Stay coolWith this water cooling jacket, suitable for inrunner brushless motors, your inrunner motor is water-cooled.The advantages at a glanceEasy to retrofit | is pushed directly onto the engine and connected to the cooling circuit inside the boat.Suitable for internal rotor motors of the 40er series, like 4082, 4092...Delivery includes O-rings for internal sealing of the water cooling jacket Delivery including cooling water nipple How it`s doneGrease O-rings with Vaseline Insert into the cooling jacket Slide the cooling jacket onto the engine Connect the cooling nipple to the water circuit with a silicone hose (sequence: inlet, controller, motor, outlet)
€17.00*
Water cooling jacket | 45 x 62mm (1,77 x 2,44") | Inrunner motors | 40er Series
Stay coolWith this water cooling jacket, suitable for inrunner brushless motors, your inrunner motor is water-cooled.The advantages at a glanceEasy to retrofit | is pushed directly onto the engine and connected to the cooling circuit inside the boat.Suitable for internal rotor motors of the 40er series, like 4082, 4092...Delivery includes O-rings for internal sealing of the water cooling jacket Delivery including cooling water nipple How it`s doneGrease O-rings with Vaseline Insert into the cooling jacket Slide the cooling jacket onto the engine Connect the cooling nipple to the water circuit with a silicone hose (sequence: inlet, controller, motor, outlet)
€17.00*