Scorpion HK 7455-330KV | Bundle Box | 22,4KW | Water cooled | Outrunner
€998.00*
% instead of €1,025.00* single purchase price (2.63% saved)
Content:
1 Set
Preorder, Delivery time: 18 - 34 labor days**
Product number:
2137-W-BB
Shipping weight/volume:
2.5 kg
Product information "Scorpion HK 7455-330KV | Bundle Box | 22,4KW | Water cooled | Outrunner"
Bundle box for fast and easy assembly
Scorpion 7455-330KV motor comes as a set including required motor mount made of aluminium 7075. No long search and everything fits 100%.
Scorpion 7455-330KV motor comes as a set including required motor mount made of aluminium 7075. No long search and everything fits 100%.
Thats included
Good to know
This motor requires a programmable ESC such as the MGM 40063-3 ESC or a different ESC with exact same technical datas.
The advantages at a glance
- Outrunner motor with higher efficiency (compared to inrunner motors with similar performance)
- Efficient and direct water cooling
- Both sided motor shaft for high stability and less vibration
- 20 Neodym magnet poles | 100% identic
- 2 Turn delta winding
- Large ball bearings for high stability and long service life
- 4 screws M5 included to delivery
That fits
- Monoboat > 2m | 1 Motor | 2 Drives | Gear box | 12-14S | 2-3 Blade Propeller | Pitch 1.4 - 1,6 | Diameter 70-75mm
- Catamaran > 2m | 2 Motors | 12-14 S | 3-4 Blade Propeller | Pitch 1.4 - 1.6 | 75-80mm
- Surfboards or other watercrafts
- Suitable ESC MGM 40063-3 or similair
Technical details
| Motor Diameter: | 86mm |
|---|---|
| Stator Diameter: | 74mm |
| Stator Length: | 55mm |
| Magnet Poles: | 20 |
| Motor KV: | 330KV |
| Max. Rotation: | 17.500 upm |
| Max. frequent current: | 14.000W (14KW) |
| Max. peak current: | 22400W (22,4KW) |
| No load current: | 9,1A |
| Max. V: | 56V |
| Continuous A: | 250A |
| Max. peak A: | 400A |
| Weight: | 2200g |
| Diameter motor shaft: | 12mm (beidseitig) |
| Length shaft: | 40mm vorn | 14,5mm hinten |
| Total length: | 106mm |
| Motor Timing: | 24° oder mehr |
| Attachment diameter: | 45mm (6xM5) |
| Max. Lipo: | 12-14 |
| Frequency: | 8KHz |
| Winding: | 2 Turn Delta |
| Torque: | 5,2Nm |
| Material: | Aluminium | Steel |
Download Graphic
Scorpion HK-7455-330KV | Bundle Box | 22,4KW | water cooled | Outrunner
Product safety information
Manufacturer Scorpion HK-7455-330KV:
Scorpion Power System Ltd.
16th Floor, Excelsior Industrial Building,
68-76 Sha Tsui Road,
Tsuen Wan, New Territories, Hong Kong
Email: support@spihk.com
16th Floor, Excelsior Industrial Building,
68-76 Sha Tsui Road,
Tsuen Wan, New Territories, Hong Kong
Email: support@spihk.com
Responsible person:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Manufacturer motor mount | Scorpion 7455 | Aluminium 7075:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Elastic coupling | Configurator
Configurator:
Segment rubber part 98 Shore
Custom made clutchWith our kit you can put together your coupling individually and precisely for your project. Choose not only between different sizes but also between different degrees of hardness The advantages at a glance Coupling precisely CNC machined from the highest quality aluminum 7075100% centric, absolutely accurate and maintenance-free High resilience with 98 Shore hardness The shaft is secured with an M5 grub screw Create the clutch according to your specifications
from €7.00*
Taboo | 2080mm (82")
Replica of the Fountain racing boat of the American Superboat and OSS racing classThe large and sleek Taboo has in contrast to the original Fountain no steps and therefore has an optimal handling in curves. Its beautiful driving image shows this monoboot both in smooth water and on the open sea and at speeds of up to 110km / h.The advantages at a glance:Beautiful driving image Suitable for 50er in- and outrunner motorsSuitable for gasoline engines with up to 50ccm Several setup option such as Z-drives, rudder strut sets, trimaxes.....Good to knowThe center of gravity for construction is 35% Manufactured using the "wet in wet" sandwich process (1 layer 100 GFK + 1 layer 160 GFK+ 1 layer 100 GFK)
Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €1,160.00*
%
GTX | Offshore boat | 1810mm (71,23") | Bundle Box
Hommage to the original GTX SV50 OuterlimitsDesigned by Mike Fiore, founder of Outerlimits Inc. Our GTX model boat is based on the original datas and therefore impresses with its excellent driving characteristics.Thats included1x GTX Offshore boat | 16962x Strut | 1075-L2x Hull passage | 1070-1.31x Rudder Maxi | 10691x Flex shaft | 10051x Flex shaft | 1005-R2x Brass PTFe pipe | 10032x Steven pipe support | 10112x Flex safety | 22561x Rudder steering | 1833.12x Rubber cuff | 16492x Water inlet | 17912x Water outlet | 17952x Silicon hose | 15522x Clips | 15562x Batterie mount | 21292x Motor mount | 24131x Servo mount | 1767-AS2The advantages at a glance:Excellent driving qualitySuitable for 50er in- and outrunner motorsSuitable for gasoline engines with up to 32ccm Several setup option such as Z-drive, rudder strut set, trimax.....Good to knowThe center of gravity for construction is 26-28% Manufactured using the "wet in wet" sandwich process (1 layer 100 GFK + 1 layer 160 GFK+ 1 layer 100 GFK)
Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €1,350.00*
instead of
€1,420.00*
single purchase price (4.93% saved)
GTX | Offshore boat | 1810mm (71,23")
Hommage to the original GTX SV50 OuterlimitsDesigned by Mike Fiore, founder of Outerlimits Inc. Ernest likes to remember his ride with him in 2013 in an open SV48 from Key West to Cuba. However, stopped by not amused Coast Guard. Unfortunately, Mike died in 2014 trying to set a record at over 170mph (270km / h). His father later took over the company and started to optimize aerodynamics and hydrodynamics on the computer. Today Outerlimits produces racing boats witht a speed of over 180mph (280Km / h). Our GTX model boat is based on the original datas and therefore impresses with its excellent driving characteristics.The advantages at a glance:Excellent driving qualitySuitable for 50er in- and outrunner motorsSuitable for gasoline engines with up to 32ccm Several setup option such as Z-drive, rudder strut set, trimax.....Good to knowThe center of gravity for construction is 26-28% Manufactured using the "wet in wet" sandwich process (1 layer 100 GFK + 1 layer 160 GFK+ 1 layer 100 GFK)
Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €840.00*
Reckless | Offshore boat | 1850mm (72,83")
The offshore boat chameleonBased on our experience with the No Mercy, the hull was stretched by 270mm, making it visually even more elegant. The result is an offshore boat with excellent handling characteristics, even with rough water and virtually unlimited construction possibilities.The advantages at a glance:Excellent driving qualitySuitable for 50er in- and outrunner motorsSuitable for gasoline engines with up to 32ccm Several setup option such as Z-drive, rudder strut set, trimax.....Good to knowThe center of gravity for construction is 26-30% Manufactured using the "wet in wet" sandwich process (1 layer 100 GFK + 1 layer 160 GFK+ 1 layer 100 GFK)
Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us
from €1,100.00*
Secure clips | Hose holder | 4pcs.
For a clean and safe assemblyWith the clip clamp you secure your silicone or other hoses and thus ensure a clean and clear structure.The advantages at a glanceBetter securing of the silicone hose on cooling water nipplesEasily mountable and dismountableFor a clean and safe assembly
€3.60*
Silicon hose | 4mm (0,16") | 1 Meter (39,37")
Quality from GermanyHigh quality silicone tubing for a reliable setupThe advantages at a glanceVery good resistance to alkalis, diluted acids, cleaning agents, etc.Weather and aging resistant, ozone resistant, steam sterilizable and physiologically harmlessOperating temperature ranges from -60° to +200° CBfR XV. and FDA § 177.2600 compliantDimensional tolerances according to the DIN ISO 3302-1 standardSuitable for methanol fuels or cooling water.
€4.90*
Cooling water transmition | Fuel transmition | Several sizes
Size:
L
A clean thingThis passage is suitable both as a fuel passage and as a tank fitting and cooling water passage.The advantages at a glanceIt is mounted directly on the fuselage or tankThe passage is inserted and then screwed tight from the opposite sideThe cooling water can be routed directly from the water intake of the rudder blade into the passage and from there using a silicone hoseDelivery including motherWe recommend using sealant
from €2.50*