Rudder | Maxi | 193mm (7,6")
€114.00*
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
1069.135
Shipping weight/volume:
0.5 kg
Available stock:
7
Product information "Rudder | Maxi | 193mm (7,6")"
Rudder with boat sided steering for your boat from 150cm (59,1")
The advantages at a glance:
- Two-sided rudder linkage device
- Waterproof, clean finish with rubber sleeve guide
- Black anodizing for added protection against corrosion
- Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof
- The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage
- Rudder blade available in several lengths
Good to know
We recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.
| Total length: | 193mm (7,6") |
|---|---|
| Flange size: | 80x30mm (3,15 x 1,18") |
| Total length rudder blade: | 135mm (5,31") |
| Thickness rudder blade: | 5mm (0,20") |
| Length outrigger: | 165mm (6,5") |
| Thickness outrigger: | 12-22mm (0,47 - 0,87") |
| Total height: | 135mm (5,31") |
| Color: | Anodized black |
| Material: | Aluminium 7075 |
Rudder | Maxi | 193mm (7,6")
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Strut 5 + Outrigger | 6,35mm (1/4") | Short | Several versions
Simple design that convincesThe advantages at a glance:
Adjustable inclineMade of high quality aluminum 7075Prop shaft made of V2A - therefore salt water resistant Brass tube can be glued directly into the strut That fits Hydroplane, outrigger, catamaran, monoboat from 110cm (43,3")Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. Place a piece of white paper on the oarstand and rub over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us
from €45.00*
Strut 5 + Outrigger | 6,35mm (1/4") | Long
Simple design that convincesThe advantages at a glance:
Adjustable inclineMade of high quality aluminum 7075Prop shaft made of V2A - therefore salt water resistantBrass tube can be glued directly into the strut That fits Hydroplane, outrigger, catamaran, monoboat from 110cm (43,3")Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. Place a piece of white paper on the oarstand and rub over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us
€49.00*
Rudder steering | Linkage set | Several versions
Thread:
M3
Remain on trackWith our rudder linkage, direct and precise control of the rudder is no problem. The connection with the rudder is done by ball heads which can be easily connected to the steering device of your rudder.That's included2 x brass guide tube 2 x stainless steel cable with threaded bush 2 x ball heads 2 x linkage connection How is it done?You need a 3.2mm hole. The brass tube is inserted into this and sealed from the inside with polymer adhesive. We recommend to grease the flex shaft with flex shaft grease before mounting. Due to the fitting accuracy of brass tube and flexible shaft as well as the lubrication with flex shaft grease, the entry of water is reliably prevented. Additionally you may also use rubber seals.Good to knowFor a secure fit, we recommend attaching the brass guide tube to the side of the servo holder. For this purpose, polymer adhesive is suitable.
from €18.00*