Skip to main content Skip to search Skip to main navigation
Trust Ecommerce Europe
Quality from Germany

Scorpion HK-5035-760KV | 7,4KW | Water cooled | Outrunner

Product information "Scorpion HK-5035-760KV | 7,4KW | Water cooled | Outrunner"


Exclusive special series of the popular Scorpion engines
This series of water-cooled external rotor motors, manufactured exclusively for us, was developed in close cooperation with Scorpion Motors.

The advantages at a glance

  • Outrunner motor with high efficiency
  • Direct water cooling inside motor - cooling water nipples are connected to motor directly through the opposite millings for water nipples
    The third milling has to be closed with a set screw
  • Large ball bearings for high stability and long service life
  • 4 screws M4, 3 x cooling nipple M4 included to delivery
  • Rotation of motor can be changed by exchange of phases or usage of suitable ESC

 That fits 

  • 300A regulators and 6-10S 
  • Propeller at 6S | 55-57mm | pitch 1.4 | 2 blade 
  • Propeller at 6S | 54-56mm | pitch 1.4 | 3 blade 
  • Propeller at 8S | 54-63mm | pith 1.4 | 2 blade 
  • Propeller at 8S | 53-62mm | pith 1.4 | 3 blade 
  • Propeller at 10S | 54-65mm | pitch 1.4 | 2 blade
  • Propeller at 10S | 53-64mm | pitch 1.4 | 3 blade


Technical details
Motor Diameter: 61mm (2,4")
Stator Diameter: 50mm (1,96")
Stator Length: 35mm (1,37")
Magnet Poles: 8
Motor KV: 760KV (rpm/V)
Max. current:              7400W
Max. peak W:              9600W
Max. V:              40V
Max. current A:              185A
Max. peak A:              240A
Weight: 729g
Diameter motor shaft:            10mm (0,4")
Body length: 75mm (2,91")
Motor Timing: 5-7.5°
Attachment circle: 40mm (1,26") (4xM4)
Max. Lipo: 6 - 10
Download Graphic
Scorpion HK-5035-760KV | 7,4KW | water cooled | Outrunner

Product safety information:

Manufacturer:  
 
Scorpion Power System Ltd.
16th Floor, Excelsior Industrial Building,
68-76 Sha Tsui Road,
Tsuen Wan, New Territories, Hong Kong    
Email: support@spihk.com 

Responsible person:  

MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany   
Email: shop@mhz-powerboats.com  
 

That fits

Motor mount | Carbon | Scorpion 5035
Motor assembly made easyFor quick and easy assembly of your MHZ Scorpion engine 5035.The advantages at a glanceCustom-fit motor mount made of 2mm carbonAngle | Inclination individually adjustableMotor cables can be routed through the recess on the sideThat fitsWe recommend fixing the motor mount in the fuselage with polymer glue. This ensures maximum strength and yet is highly elastic. This dampens shocks and noise.

€26.90*
Collet clutch | 10 - 6,35mm (0,39" - 1/4") | Aluminium 7075
Top quality for the highest demandsOur collet coupling is made from aluminum 7075 and ensures a safe, precise and imbalance-free connection between the flex shaft and the motor.The advantages at a glancemade of aluminum 7075 absolutely centric and free of imbalance fine thread loss-free transmission of torque to the flex shaft easy assembly and disassembly That fits suitable for 6,35mm (1/4") flex shaft suitable for 10mm (0,39") motor shaft How it's donePart 1 of the coupling is pushed onto the motor shaft and secured using the two grub screws (optionally with Loctite). Then the union nut (part 2) is pushed onto the flexible shaft and connected to part 1.

€20.50*
Flex shaft | 6,35mm (1/4") | 67cm (26,38") | Left
Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:Swiss quality for high power setupsIntegrated gold wire so rotation direction is shown right away 6,35mm (1/4") diameterSquared end  on one side - can be removed for usage with collet clutchProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite. 

Content: 0.67 Running meter (€20.90* / 1 Running meter)

€14.00*
Flex shaft | 6,35mm (1/4") | 67cm (26,38") | Right
Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:Swiss quality for high power setupsIntegrated gold wire so rotation direction is shown right away 6,35mm (1/4") diameterSquared end  on one side - can be removed for usage with collet clutchProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite. 

Content: 0.67 Running meter (€20.90* / 1 Running meter)

€14.00*
Brass PTFE Hose | Steven pipe | 10mm (0,39") | 100cm (39,37") length
Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 6,35mm (1/4") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently. 

€23.00*
Brass PTFE Hose | Steven pipe | 10mm (0,39") | 30cm (11,81") length
Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 6,35mm (1/4") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently. 

€8.60*
Support | Steven pipe | Brass pipe | 10mm (0,39")
Securing the brass - PTFE tubeThe advantages at a glance Securely mount the brass PTFE tube in your boat Height individually adjustable The flex shaft is prevented from swinging up Manufactured from high-strength aluminum 7075How its doneFor easy assembly, we recommend using polymer glue. To do this, degrease the fuselage at the required point using brake cleaner and then glue in the stern tube holder.

€17.00*
Support | Steven pipe | Brass pipe | 10mm (0,39")
Securing the brass - PTFE tubeThe advantages at a glance Securely mount the brass PTFE tube in your boat Height individually adjustable The flex shaft is prevented from swinging up Manufactured from high-strength aluminum 7075How its doneFor easy assembly, we recommend using polymer glue. To do this, degrease the fuselage at the required point using brake cleaner and then glue in the stern tube holder.

€16.50*
Flex safety | 6,35mm (1/4")
Security and thrust bearingThe advantages at a glance The ball bearing in the flex shaft lock prevents vibrations and also serves as a thrust bearing The two-piece retaining ring guarantees precise attachment Manufactured from high-strength aluminum 7075That's how it's done Slide the flex shaft lock over the brass/PTFE tube Using a screwdriver or similar, mark the hole in the brass/PTFE tube through the opening for the grease nipple Take the flex shaft lock from the brass/PTFE tube and drill the hole in the tube at the marked point You can then mount the flex shaft lock completely on the brass/PTFE tube and now conveniently grease the internal flex shaft using the grease nipple Good to knowRegular greasing of the flex shaft via the grease nipple significantly increases the durability of the material. We recommend using flex shaft grease for this.

€23.00*