Harpoon | 430mm (16,93") | Bundle Box
€165.00*
% instead of €183.69* single purchase price (10.17% saved)
Content:
1 Piece
Preorder, Delivery time: 18 - 34 labor days**
Product number:
1691-D-BB
Shipping weight/volume:
1 kg
Product information "Harpoon | 430mm (16,93") | Bundle Box"
Little speedster for big fun
The small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners.
The advantages at a glance
- Low construction costs | Short set-up time
- Small and manoeuvrable for optimal handling
- Suitable for small engines (24-32mm) | 3000 - 4000KV and 2-4S
Thats included
- Harpoon 1691
- Decal set (Available in red, green or orange. Please mention your color choice with your order) 1691-D
- Rudder with water intake and steering 1074
- Strut Set incl. flex shaft and propeller 1072
- Water outlet 1795
- Rubber cuff 1648
- Steering connection 1830-2
- Secure clips 1556
- Silicon hose
- Motor mount 1553
- Batterie mount 2128
Good to know
- The center of gravity is 26-30% from the stern
- Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP
- Therefore, the upper and lower parts are directly connected to each other
- If NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The Gecko mono boat will turn on its own now
Please notice that this product is not a ready to drive product.
Further this product is a model building accessories, therefore no toy.
Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason.
Videos
YouTube
Technical details
| Length: | 430mm (16,93") |
|---|---|
| Width: | 105mm (4,13") |
| Height: | 80mm (3,15") |
| Weight: | approx. 150g (approx. 0,33 lbs) |
| Material: | GFK/ FRP (Fibre glass reinforced plastic) |
| Color: | White |
| Center of gravity for assembly: | 26-30% from transom |
Rudder
| Total length: | 40mm (1,57") |
|---|---|
| Size flange: | 13x17mm (0,5" x 0,7") |
| Total length rudder blade: | 37mm (1,46") |
| Thickness rudder blade: | 4mm (0,16") |
| Length outrigger: | 21mm (0,83") |
| Thickness outrigger: | 2mm (0,08") |
| Total height: | 52mm (2,05") |
| Color: | Silver |
| Material: | Aluminium |
Strut Set
Batterie mount
| Strut: | Material: Aluminium Total height 26mm (1,02") | Length outrigger complete 57mm (2,24") Height adjustable +/- 5mm Flange 23,5 x 11 mm (0,93" x 0,43") Incl. assembly screws M3 |
|---|---|
| Flexshaft: | 3,2mm (0,13") with square end | Length: approx. 300mm (11,8") |
| Brass PTFE tube: | 250mm (9,84") |
Propeller: |
32mm (1,26") |Drive Dog | Plastic |
| Length: | 40mm (1,57") |
|---|---|
| Width: | According your demand |
| Height: | 25mm (0,98") |
| Material: | GFK | 2,25mm (0,09") thickness| Including velcro tape |
FAQ
How to place rudder and strut at the hull?
Place the strut with an angle of 1.5 - 2°C seen from middle of transom. Place the rudder at the right side too. Make sure that even with largest swing it does not hit the propeller.
Place the strut with an angle of 1.5 - 2°C seen from middle of transom. Place the rudder at the right side too. Make sure that even with largest swing it does not hit the propeller.
Harpoon | 430mm (16,93") | Bundle Box
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com