Rudder mount | With steering arm
€25.00*
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
1083
Shipping weight/volume:
0.3 kg
Available stock:
5
Product information "Rudder mount | With steering arm "
Rudder mount with single steering
Suitable for your boat between 100-160cm (39,37" - 70").
Total length: 70mm (2,76")
Adapter: 40 x 32,5mm (1,57 x 1,28")
Rudder intake inner: 4,2mm (0,17")
Material: Aluminium
Attachment milling: 4 x M4
Adapter: 40 x 32,5mm (1,57 x 1,28")
Rudder intake inner: 4,2mm (0,17")
Material: Aluminium
Attachment milling: 4 x M4
Rudderblade not included.
Good to know
A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.
Rudder mount | with steering arm
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Rudder steering | Linkage set | Several versions
Thread:
M3
Remain on trackWith our rudder linkage, direct and precise control of the rudder is no problem. The connection with the rudder is done by ball heads which can be easily connected to the steering device of your rudder.That's included2 x brass guide tube 2 x stainless steel cable with threaded bush 2 x ball heads 2 x linkage connection How is it done?You need a 3.2mm hole. The brass tube is inserted into this and sealed from the inside with polymer adhesive. We recommend to grease the flex shaft with flex shaft grease before mounting. Due to the fitting accuracy of brass tube and flexible shaft as well as the lubrication with flex shaft grease, the entry of water is reliably prevented. Additionally you may also use rubber seals.Good to knowFor a secure fit, we recommend attaching the brass guide tube to the side of the servo holder. For this purpose, polymer adhesive is suitable.
from €18.00*
Sold out
Hydraulic dummie
A visual highlightThis hydraulic dummy simulates the original scale look and is intended as a visual supplement for the actual linkage set.The advantages at a glance Arm length adjustable 75-109mm Made of high-strength aluminum 7075 Threaded rod stainless steel Anodized black as protection against corrosion That's included2x hydraulic dummy (left | right) 2x ball heads 2x screw M2.5 2x stop nut M2.5
€19.00*
Ball joint | 1 pcs. | Several types
Thread:
M3
Smart supplies for easy rudder steering contains1 x ball socket made of plastic1x ball joint made of aluminiumGood to knowAvailable with M3 as wellas M4 thread. In combintion with a fitting thread rod you can create a fast and easy rudder and servo steering on demand.
from €1.50*