Bundle Box | Rudder Strut Set | 4,75mm (3/16")
€130.00*
% instead of €143.00* single purchase price (9.09% saved)
Content:
1 Set
In stock, delivery time: 1-5 labor days**
Product number:
1070-BB
Shipping weight/volume:
0.2 kg
Available stock:
4
Product information "Bundle Box | Rudder Strut Set | 4,75mm (3/16") "
Rudder Strut Set for your boat between 70–100cm (27,6"–39,4")
Bundle Box for fast and easy assembly.
Thats included:
Perfect for your boat because of:
- Both-sided rudder sterring device
- Made from high quality aluminium 7075
- Drive shaft made of V2A (stainless steel)
- Suitable for usage in salt water as well
- Plain bearings installed in the drives ensure high efficiency and low maintenance (compared to ball bearings)
- Thrust bearing washers are made of the highes quality PEEK material. This material is also resistant to most chemicals
- The rudder blade automatically folds upwards in the event of collision with flotsam. Damage to the hull caused by the rudder itself is thereby prevented.
Good to know
We recommend a distance of 1,5mm between drive dog and drive body
- For assembly we recommend to use of 4 x M3 screws. A small trick helps to mark the holes at the transom. Place a white piece of paper on the rudder stand and strip several times with a pencil over it. By doing so, you "copy" the exact contours of the holder. Now simply cut the template, stick to the transom with adhesive tape and drill the required holes.
| Total length: | 130mm (5,12") |
|---|---|
| Length outrigger: | 95mm (3,74") |
| Height outrigger: | 55mm (2,17") |
| Flange: | 33x21mm (1,3 x 0,83") |
| Total length rudder blade: | 110mm (4,33") |
| Prop shaft: | For 4,75mm (3/16") flex shaft | For 4,75mm (3/16") propeller |
| Color: | Silver |
| Material: | Aluminium 7075 |
Bundle Box | Rudder Strut Set | 4,75mm (3/16")
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Support | Steven pipe | Brass pipe | 7mm (0,28")
Securing the brass - PTFE tubeThe advantages at a glance Securely mount the brass PTFE tube in your boat Height individually adjustable The flex shaft is prevented from swinging up Manufactured from high-strength aluminum 7075How its doneFor easy assembly, we recommend using polymer glue. To do this, degrease the fuselage at the required point using brake cleaner and then glue in the stern tube holder.
€16.00*
Flex safety | 4,75mm (3/16")
Security and thrust bearingThe advantages at a glance The ball bearing in the flex shaft lock prevents vibrations and also serves as a thrust bearing The two-piece retaining ring guarantees precise attachment Manufactured from high-strength aluminum 7075That's how it's done Slide the flex shaft lock over the brass/PTFE tube Using a screwdriver or similar, mark the hole in the brass/PTFE tube through the opening for the grease nipple Take the flex shaft lock from the brass/PTFE tube and drill the hole in the tube at the marked point You can then mount the flex shaft lock completely on the brass/PTFE tube and now conveniently grease the internal flex shaft using the grease nipple Good to knowRegular greasing of the flex shaft via the grease nipple significantly increases the durability of the material. We recommend using flex shaft grease for this.
€23.00*
Collet clutch | 5 - 4,75mm (0,19" - 3/16") | Aluminium 7075
Top quality for the highest demandsOur collet coupling is made from aluminum 7075 and ensures a safe, precise and imbalance-free connection between the flex shaft and the motor.The advantages at a glanceMade of aluminum 7075 Absolutely centric and free of imbalance Fine thread Loss-free transmission of torque to the flex shaft easy assembly and disassembly That fits Suitable for 4.75mm (3/16") flex shaft Suitable for 5mm (0,19") motor shaft How it's donePart 1 of the coupling is pushed onto the motor shaft and secured using the two grub screws (optionally with Loctite). Then the union nut (part 2) is pushed onto the flexible shaft and connected to part 1.
€19.00*
Collet clutch | 8 - 4,75mm (0,31" - 3/16") | Aluminium 7075
Top quality for the highest demandsOur collet coupling is made from aluminum 7075 and ensures a safe, precise and imbalance-free connection between the flex shaft and the motor.The advantages at a glancemade of aluminum 7075 absolutely centric and free of imbalance fine thread loss-free transmission of torque to the flex shaft easy assembly and disassembly That fits suitable for 4.75mm(3/16") flex shaft suitable for 8mm (0,31") motor shaft How it's donePart 1 of the coupling is pushed onto the motor shaft and secured using the two grub screws (optionally with Loctite). Then the union nut (part 2) is pushed onto the flexible shaft and connected to part 1.
€20.50*