Skip to main content Skip to search Skip to main navigation
Trust Ecommerce Europe
Quality from Germany

Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Left

Product information "Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Left "


Highest quality for highest demands
With our flex shaft your project will have no limit

The advantages at a glance:

  • High quality for high power setups
  • 4,75mm (3/16") diameter
  • Product photo shows delivered direction

Thats how its done

For best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite. 


Length: 100cm (39,37")
Diameter:            4,75mm (3/16")
Rotation: Left | Normal rotation
Material: Steel

Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Left

Product safety information:  

Manufacturer:  

MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com

That fits

Brass PTFE Hose | Steven pipe | 7mm (0,27") | 30cm (11,81") length
Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 4,75mm (3/16") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently. 

€8.00*
Support | Steven pipe | Brass pipe | 7mm (0,28")
Securing the brass - PTFE tubeThe advantages at a glance Securely mount the brass PTFE tube in your boat Height individually adjustable The flex shaft is prevented from swinging up Manufactured from high-strength aluminum 7075How its doneFor easy assembly, we recommend using polymer glue. To do this, degrease the fuselage at the required point using brake cleaner and then glue in the stern tube holder.

€16.00*
Flex safety | 4,75mm (3/16")
Security and thrust bearingThe advantages at a glance The ball bearing in the flex shaft lock prevents vibrations and also serves as a thrust bearing The two-piece retaining ring guarantees precise attachment Manufactured from high-strength aluminum 7075That's how it's done Slide the flex shaft lock over the brass/PTFE tube Using a screwdriver or similar, mark the hole in the brass/PTFE tube through the opening for the grease nipple Take the flex shaft lock from the brass/PTFE tube and drill the hole in the tube at the marked point You can then mount the flex shaft lock completely on the brass/PTFE tube and now conveniently grease the internal flex shaft using the grease nipple Good to knowRegular greasing of the flex shaft via the grease nipple significantly increases the durability of the material. We recommend using flex shaft grease for this.

€23.00*
Collet clutch | 5 - 4,75mm (0,19" - 3/16") | Aluminium 7075
Top quality for the highest demandsOur collet coupling is made from aluminum 7075 and ensures a safe, precise and imbalance-free connection between the flex shaft and the motor.The advantages at a glancemade of aluminum 7075 absolutely centric and free of imbalance fine thread loss-free transmission of torque to the flex shaft easy assembly and disassembly That fits suitable for 4.75mm (3/16") flex shaft suitable for 5mm (0,19") motor shaft How it's donePart 1 of the coupling is pushed onto the motor shaft and secured using the two grub screws (optionally with Loctite). Then the union nut (part 2) is pushed onto the flexible shaft and connected to part 1.

€19.00*