Rudder Strut Set for your boat between 70–100cm (27,6"–39,4")Perfect for your boat because of:Both-sided rudder sterring deviceMade from high quality aluminium 7075Drive shaft made of V2A (stainless steel) Suitable for usage in salt water as wellPlain bearings installed in the drives ensure high efficiency and low maintenance (compared to ball bearings)Thrust bearing washers are made of the highes quality PEEK material. This material is also resistant to most chemicalsThe rudder blade automatically folds upwards in the event of collision with flotsam. Damage to the hull caused by the rudder itself is thereby prevented.Thats included: Rudder - Strut system Adapter for Brass PTFE hose 7mm PEEK thrust bearing Good to knowWe recommend a distance of 1,5mm between drive dog and drive bodyFor assembly we recommend to use of 4 x M3 screws. A small trick helps to mark the holes at the transom. Place a white piece of paper on the rudder stand and strip several times with a pencil over it. By doing so, you "copy" the exact contours of the holder. Now simply cut the template, stick to the transom with adhesive tape and drill the required holes.For further questions please contact us

Rudder Strut Set for your boat between 70–100cm (27,6"–39,4")Bundle Box for fast and easy assembly. Thats included:  1x Rudder - Strut system |  10701x Adapter for Brass PTFE hose 7mm  1x PEEK thrust bearing 1x Steering | 18331x Brass PTFE hose 7mm x 30cm |  10021x Flex shaft 4,75mm (3/16") | 10901x Hull transmission 7mm | 1070-1 Perfect for your boat because of:Both-sided rudder sterring deviceMade from high quality aluminium 7075Drive shaft made of V2A (stainless steel) Suitable for usage in salt water as wellPlain bearings installed in the drives ensure high efficiency and low maintenance (compared to ball bearings)Thrust bearing washers are made of the highes quality PEEK material. This material is also resistant to most chemicalsThe rudder blade automatically folds upwards in the event of collision with flotsam. Damage to the hull caused by the rudder itself is thereby prevented.Good to know We recommend a distance of 1,5mm between drive dog and drive body For assembly we recommend to use of 4 x M3 screws. A small trick helps to mark the holes at the transom. Place a white piece of paper on the rudder stand and strip several times with a pencil over it. By doing so, you "copy" the exact contours of the holder. Now simply cut the template, stick to the transom with adhesive tape and drill the required holes.For further questions please contact us

Universal complete system for your boat from 120cm (47,24")The advantages at a glance: Two-sided rudder linkage device Height adjustable strut Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsThats included: Rudder - strut system with linkage levers on both sides Thrust washer made of PEEK material Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us 

Universal complete system for your boat from 120cm (47,24")Bundle Box for fast and easy assembly Thats included:1x Rudder - strut system with linkage levers on both sides |  10681x Thrust washer made of PEEK material 1x Brass PTFE pipe 10mm x 30cm | 10031x Flex shaft 6,35mm (1/4") | 10051x Hull transmission 10mm (0,39") | 1070-1.31x Steering | 1833The advantages at a glance: Two-sided rudder linkage device Height adjustable strut Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsGood to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.

Universal complete system for your boat from 150cm (59,1")The advantages at a glance: Two-sided rudder linkage device Height adjustable strut Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsThats included: Rudder - strut system with linkage levers on both sides Thrust washer made of PEEK material Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us

Universal complete system for your boat from 150cm (59,1")Bundle Box for fast and easy assembly.Thats included:  1x Rudder - strut system with linkage levers on both sides  | 1069-RS1x Thrust washer made of PEEK material 1x Brass PTFE hose 10mm x 30cm | 10031x Flex shaft 6,35mm (1/4") | 10051x Hull transmission 10mm (0,39") | 1070-1.31x Steering | 1833The advantages at a glance: Two-sided rudder linkage device Height adjustable strut Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsGood to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us

Top quality at a good priceSimple but effective strut suitable for boats from 110cm (43,3")The advantages at a glance: Manufactured from high-strength aluminum 7075 Brass tube can be glued directly into the strut Height individually adjustable via the recess in the strut Propeller shaft made of V2A - therefore salt water resistantThat fits: 6.35mm flex shaft and 10mm brass-PTFE tube Good to knowFor fine adjustment of the strut, we recommend marking the starting position with a pen, for example. This way you can easily find the starting position if the change did not have the desired effect.

Top quality at a good priceBundle box for fast and easy assembly.Thats included:1x Strut 10711x Flex shaft 6,35mm (1/4") - rotation according to order1x Brass PTFE hose 10mm x 30cm 10031x Hull transmission 10mm 1070-1.1The advantages at a glance: Manufactured from high-strength aluminum 7075 Brass tube can be glued directly into the strut Height individually adjustable via the recess in the strut Propeller shaft made of V2A - therefore salt water resistant That fits:  Suitable for boats from 110cm (43,3") Good to knowFor fine adjustment of the strut, we recommend marking the starting position with a pen, for example. This way you can easily find the starting position if the change did not have the desired effect.

Simple design that convincesThe advantages at a glance: Adjustable inclineMade of high quality aluminum 7075Prop shaft made of V2A - therefore salt water resistant Brass tube can be glued directly into the strut That fits Hydroplane, outrigger, catamaran, monoboat from 110cm (43,3")Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. Place a piece of white paper on the oarstand and rub over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us

Simple design that convincesBundle box for fast and easy assemblyThats included1x Strut 6,35mm (1/4") with outrigger short | 1075-K1x Flex shaft 6,35mm (1/4") - rotation according to order1x Brass PTFE hose 10mm (0,39") | 10031x Hull transmission 10mm (0,39") | 1070-1.1The advantages at a glance: Adjustable inclineMade of high quality aluminum 7075Prop shaft made of V2A - therefore salt water resistant Brass tube can be glued directly into the strut That fits Hydroplane, outrigger, catamaran, monoboat from 110cm (43,3")Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. Place a piece of white paper on the oarstand and rub over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.

Simple design that convincesThe advantages at a glance: Adjustable inclineMade of high quality aluminum 7075Prop shaft made of V2A - therefore salt water resistant Brass tube can be glued directly into the strut That fits Hydroplane, outrigger, catamaran, monoboat from 110cm (43,3")Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. Place a piece of white paper on the oarstand and rub over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us

Simple design that convincesBundle Box for fast and easy assembly.Thats included 1x Strut 6,35mm (1/4") with outrigger long | 1075-L1x Flex shaft 6,35mm (1/4") - rotation according to order 1x Brass PTFE hose 10mm (0,39") | 10031x Hull transmission 10mm (0,39") | 1070-1.1 The advantages at a glance: Adjustable inclineMade of high quality aluminum 7075Prop shaft made of V2A - therefore salt water resistant Brass tube can be glued directly into the strutThat fits Hydroplane, outrigger, catamaran, monoboat from 110cm (43,3")How it´s doneWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. Place a piece of white paper on the oarstand and rub over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us

Spare part by handSpare prop shaft 6,35mm (1/4") made of stainless steel. That fitsStrut 1071Strut with outrigger short 1075-KStrut with outrigger long 1075-LGood to knowTo avoid lost of your prop shaft and propeller, we suggest to use our flex safety with ball bearing. 

Spare part by handSpare prop shaft 6,35mm (1/4") made of stainless steel ready for usage with already glued in flex shaft (rotation according to your order)That fitsStrut 1071Strut with outrigger short 1075-KStrut with outrigger long 1075-LGood to knowTo avoid lost of your prop shaft and propeller, we suggest to use our flex safety with ball bearing. 

Simple and fast solution  This functional drive set for small boats up to 450mm  (17,71")  length, provides a simple and fast assembly. Thats includedHeight adjustable strut with assembly screws M3Propeller shaft incl. PTFE washer, Drive Dog, Set screw and Torpedo screwFlex shaft 3,2mm (0,13") with square endBrass | PTFe pipePropeller | Plastic | Drive Dog 32mm (1,26")For further questions, please contact us 

Strut for individual drive assemblyWith this strut you can adapt a strut drive to the needs of your model boat yourself.The advantages at a glance: Suitable for 5mm propeller shaft Suitable for flex shaft 3.2mm, rigid shaft or similar Strut blade has cut out for adjustung height (17x6mm | 0,67x0,24") Individual drive assembly possible

Strut for individual drive assemblyWith this strut you can adapt a strut drive to the needs of your model boat yourself.The advantages at a glance: Suitable for 5mm propeller shaft Suitable for flex shaft 3.2mm, rigid shaft or similar Strut blade has cut out for adjustung height (8x4mm | 0,31x0,16") Individual drive assembly possible