Strut 4 | 6,35mm (1/4")

€36.00*

Content: 1 Piece

Prices incl. VAT plus shipping costs

In stock, delivery time: 1-5 labor days**

Product number: 1068-9-S

Shipping weight/volume: 0.2 kg

Available stock: 46

Product information "Strut 4 | 6,35mm (1/4") "

Top quality at a good price

Simple but effective strut suitable for boats from 110cm (43,3")

The advantages at a glance:

Manufactured from high-strength aluminum 7075
Anodized black
Brass tube can be glued directly into the strut
Height individually adjustable via the recess in the strut
Propeller shaft made of V2A - therefore salt water resistant

That fits:

6.35mm flex shaft and 10mm brass-PTFE tube
Suitable for rudder - strut set 1068 and 1069 as well as 1068-RS and 1069-RS

Good to know

For fine adjustment of the strut, we recommend marking the starting position with a pen, for example. This way you can easily find the starting position if the change did not have the desired effect.

Total height:	90mm (3,54")
Width blade:	27mm (1,07")
Thickness:	4,4mm (0,17")
Prop shaft:	6,35mm (1/4")
Outer diamater prop shaft:	12mm (0,47")
Material:	Aluminium 7075 - anodized black \| Prop shaft V2A (stainless steel)
Weight:	64g

Strut 4 | 6,35mm (1/4")

Product safety information:

Manufacturer:

MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com

That fits

Rudder Strut 4 Set | Midi | 6,35mm (1/4")

Length rudder blade: 155mm (6,10")

Universal complete system for your boat from 120cm (47,24")The advantages at a glance: Two-sided rudder linkage device Height adjustable strut Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsThats included: Rudder - strut system (strut 4) with linkage levers on both sides Thrust washer made of PEEK material Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us

from €135.00*

Rudder Strut 4 Set | Maxi | 6,35mm (1/4")

Length rudder blade: 135mm (5,31")

Universal complete system for your boat from 150cm (59,1")The advantages at a glance: Two-sided rudder linkage device Height adjustable strut Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsThats included: Rudder - strut system (strut 4) with linkage levers on both sides Thrust washer made of PEEK material Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us

from €150.00*

Support | Steven pipe | Brass pipe | 10mm (0,39")

Securing the brass - PTFE tubeThe advantages at a glance Securely mount the brass PTFE tube in your boat Height individually adjustable The flex shaft is prevented from swinging up Manufactured from high-strength aluminum 7075How its doneFor easy assembly, we recommend using polymer glue. To do this, degrease the fuselage at the required point using brake cleaner and then glue in the stern tube holder.

€17.00*

Flex safety | 6,35mm (1/4")

Security and thrust bearingThe advantages at a glance The ball bearing in the flex shaft lock prevents vibrations and also serves as a thrust bearing The two-piece retaining ring guarantees precise attachment Manufactured from high-strength aluminum 7075That's how it's done Slide the flex shaft lock over the brass/PTFE tube Using a screwdriver or similar, mark the hole in the brass/PTFE tube through the opening for the grease nipple Take the flex shaft lock from the brass/PTFE tube and drill the hole in the tube at the marked point You can then mount the flex shaft lock completely on the brass/PTFE tube and now conveniently grease the internal flex shaft using the grease nipple Good to knowRegular greasing of the flex shaft via the grease nipple significantly increases the durability of the material. We recommend using flex shaft grease for this.

€23.00*

Flex shaft | 6,35mm (1/4") | 67cm (26,38") | Left

Highest quality for highest demandsWith our flex shaft made by Suhner, your project will have no limitThe advantages at a glance:Swiss quality for high power setupsIntegrated gold wire so rotation direction is shown right away 6,35mm (1/4") diameterSquared end on one side - can be removed for usage with collet clutchProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.

Content: 0.67 Running meter (€20.90* / 1 Running meter)

€14.00*

Flex shaft | 6,35mm (1/4") | 67cm (26,38") | Right

Content: 0.67 Running meter (€20.90* / 1 Running meter)

€14.00*

Rudder | Midi | 170mm (6,69")

Length rudder blade: 135mm (5,31")

Rudder with double steering for your boat from 120cm (47,24")The advantages at a glance: Two-sided rudder linkage device Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsGood to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.

from €99.00*

Rudder | Maxi | 193mm (7,6")

Length rudder blade: 155mm (6,10")

Rudder with boat sided steering for your boat from 150cm (59,1")The advantages at a glance: Two-sided rudder linkage device Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsGood to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.

from €114.00*

Brass PTFE Hose | Steven pipe | 10mm (0,39") | 30cm (11,81") length

Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 6,35mm (1/4") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently.

€8.60*