Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and maneuverable for optimal handling Suitable for rigid shaft and M4 propeller or flex shaft Suitable for small engines (24-32mm)  and 3-4S Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The Gecko mono boat will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Little speedster for big funThe small eco boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and maneuverable for optimal handling Suitable for small engines (24-32mm) | 3000 - 4000KV and 2-4S Thats included1x Gecko  17421x Rudder with steering 10741x Strut Set incl. flex shaft and propeller 10721x Batterie mount 21251x Rubber cuff 16461x Steering connection 1830-21x Silicon hose1x Clips 15561x Water outlet 17951x Motor mount | 1553Good to know The center of gravity is 26% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The Gecko mono boat will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason.For further questions please contact us

Little speedster for big fun The small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also perfect for beginners.  Thats included and assembled already Gecko Monoboot  Motor mount for small motors (24-32mm)   Coupling 2,0 - 3,3mm  Rigid shaft 2mm with thread for propeller M4  Rudder with one sided steering   Hull passage + rubber cuff  Servo mount  Velcro tape The advantages at a glance  Small and manoeuvrable for optimal handling  Suitable for  M4 propeller  Suitable for 3-4S  Good to know  The center of gravity is 26 - 30% from the stern  Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP  Therefore, the upper and lower parts are directly connected to each other If NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The Gecko mono boat will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us 

Paint? Not necessary!Our decals are made only with high quality foil. Extra clear varnish of our decals is therefore not necessary, but possible. Convince yourself of their longevity, the brilliant colors and the easy to apply bows. Thats includedDelivery includes the decal set (sticker) for the Gecko | the Gecko hull is not includedThat fitsSuitable for Gecko mono boatSimilar boats with 330 - 380mm lengthGood to knowThere are some tips for easier attachment at section downloads.

Don`t be fooled by the sizeThe small micro round nose is one of a kind and is therefore more suitable for advanced and professionals. Its high maneuverability and speed shows this shovelnose on smooth water. Speeds of 100Km / h are no problem here.The advantages at a glance  Low construction costs | Short set-up time  Small and manoeuvrable for optimal handling  Suitable for rigid shaft and M4 propeller or flex shaft  Suitable for small engines (24-32mm)  and 2-4S Good to know  The center of gravity is 26 - 30% from the stern  Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP  Therefore, the upper and lower parts are directly connected to each otherPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Little speedster for big funThe small eco boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling Suitable for small engines (24-32mm) | 3000 - 4000KV and 2-4S Thats included1x Micro Shovelnose  17391x Decal set 1739-D1x Rudder with water intake and steering 10741x Strut Set incl. flex shaft and propeller 10721x Water outlet 17951x Rubber cuff 16461x Steering connection 1830-21x Secure clips 15561x Silicon hose1x Motor mount 15531x Batterie mount 2125Good to know The center of gravity is 26% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The Gecko mono boat will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Paint? Not necessary! Our decals are made only with high quality foil. Extra clear varnish of our decals is therefore not necessary, but possible. Convince yourself of their longevity, the brilliant colors and the easy to apply bows.  Thats included Delivery includes the decal set (sticker) for the Micro Shovelnose 385mm (15,2") | the  hull itself is not included.That fits Suitable for Micro Shovelnose or similar boats with 380mm length.Good to know Tips for easier attachment you can find here in the section downloads.

Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling Suitable for rigid shaft and M4 propeller or flex shaft Suitable for small engines (24-32mm)  and 3-4S Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The hull will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Little speedster for big funThe small eco boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and maneuverable for optimal handling Suitable for small engines (24-32mm) | 3000 - 4000KV and 2-4S Thats included1x Mamba  17471x Rudder with steering 10741x Strut Set incl. flex shaft and propeller 10721x Batterie mount 21251x Rubber cuff 16461x Steering connection 1830-21x Silicon hose1x Clips 15561x Water outlet 17951x Motor mount | 1553Good to know The center of gravity is 26% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The hull will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Paint? Not necessary!Our decals are made only with high quality foil. Extra clear varnish of our decals is therefore not necessary, but possible. Convince yourself of their longevity, the brilliant colors and the easy to apply bows. Thats includedDelivery includes the decal set (sticker) for the Mamba | the Mamba hull is not includedThat fitsSuitable for Mamba mono boatSimilar boats with 350 - 400mm lengthGood to knowThere are some tips for easier attachment at section downloads.

Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling Suitable for rigid shaft and M4 propeller or flex shaft Suitable for small engines (24-32mm)  and 3-4S Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The hull will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling Suitable for small engines (24-32mm) | 3000 - 4000KV and 2-4S Thats includedHarpoon 1691Decal set (Available in red, green or orange. Please mention your color choice with your order)  1691-DRudder with water intake and steering 1074Strut Set incl. flex shaft and propeller 1072Water outlet 1795Rubber cuff 1646Steering connection 1830-2Secure clips 1556Silicon hoseMotor mount 1553Batterie mount 2125Good to know The center of gravity is 26-30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The Gecko mono boat will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Paint? Not necessary! Our decals are made only with high quality foil. Extra clear varnish of our decals is therefore not necessary, but possible. Convince yourself of their longevity, the brilliant colors and the easy to apply bows.  Thats included Delivery includes the decal set (sticker) for the Harpoon 430mm (16,93") | the  hull itself is not included.That fits Suitable for Harpoon or similar boats with 430mm length.Good to know Tips for easier attachment you can find here in the section downloads.

Semi scale replica of the Miss Madison HydroplaneThe hydroplane made of GFK unfolds its driving characteristics best on smooth water. Speed of more than 100Km/h is no problem for this hull.The advantages at a glance  Low construction costs | Short set-up time  Perfect for smooth water Suitable for small engines (24-32mm), 3000-4000 rpm, 2-3S Good to know  The center of gravity is 2cm behind trailing edge of the floatManufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP  Therefore, the upper and lower parts are directly connected to each otherPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Little speedster for big funThe small eco boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling Suitable for small engines (24-32mm) | 3000 - 4000KV and 2-3S Thats included1x Hydroplane 1734-4001x Rudder with steering 10741x Strut Set incl. flex shaft and propeller 1072Rubber cuff 1646Steering connection 1830-2Motor mount 1553Clip 1556Water outlet 1795Silicon hose1x Batterie mount 2125Good to know The center of gravity is 26% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The Gecko mono boat will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling Suitable for rigid shaft and M4 propeller or flex shaft Suitable for small engines (24-32mm)  and 3-4S Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The hull will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling Suitable for small motors (24-32mm) and 3-4SThat`s included 1x Speedstar 1703-S 1x Rudder with water intake and steering 1078 1x Strut set + propeller 1077 1x Clips 1556 1x Silicon hose1x Motor mount 15531x Batterie mount 2128 1x ESC mount 1631-ESC 1x Rubber cuff with hull passage 1649 1x Water outlet 1795Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The Speedstar mono boat will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Paint? Not necessary!Our decals are made only with high quality foil. Extra clear varnish of our decals is therefore not necessary, but possible. Convince yourself of their longevity, the brilliant colors and the easy to apply bows. Thats includedDelivery includes the decal set (sticker) for the Speedstar | the Speedstar hull is not includedThat fitsSuitable for Speedstar mono boatSimilar boats with 500 - 550mm lengthGood to knowThere are some tips for easier attachment at section downloads.

Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling Suitable for rigid shaft and M4 propeller or flex shaft Suitable for small engines (24-32mm)  and 3-4S Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The boat will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Small and manoeuvrable for optimal handling That`s included 1x Shockwave 17261x Rudder with water intake and steering 1078 1x Strut set + propeller 1077 1x Clips 1556 1x Silicon hose1x Motor mount 15531x Batterie mount 2128 1x ESC mount 1631-ESC 1x Rubber cuff with hull passage 1649 1x Water outlet 1795Good to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherIf NiCd or NiMh batteries (or lipo with additional weight) are used, a flood channel is not necessary because of the extra weight. In case of flip jut push gas to maximum very quick. The  boat will turn on its own nowPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Semi scale replica of the Miss Exide HydroplaneThe hydroplane made of GFK, CFK or CAFK unfolds its driving characteristics best on smooth water.The advantages at a glance  Low construction costs | Short set-up time  Perfect for smooth water Suitable for small engines (30-36mm) Good to know  The center of gravity is 2cm behind trailing edge of the floatManufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP  Therefore, the upper and lower parts are directly connected to each otherPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

Little speedster for big funThe small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time Integrated flood channelReinforced CFK transomSmall and manoeuvrable for optimal handling Suitable for small engines 3650-2500KV or 2865 motorsThats included: GFK Boot with CFK reinforced transom Strut with 2mm (0,08") rigid shaft | M4 prop intake Rudder with steering Turn Fin Motor mount with water cooling for 30er motors Servo mount Velcro tape  Silicon hose  Water outlet Good to know Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. For further questions please contact us

Little speedster for big funThe Tsunami comes from FSR-O 3,5 class and won German championship. The small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. The advantages at a glance Low construction costs | Short set-up time FSR compatibelSmall and manoeuvrable for optimal handling Suitable for 4,75mm (3/16") flex shaftSuitable for small engines (inrunner | outrunner) of 30er and 40er series and 5-8SGood to know The center of gravity is 26 - 30% from the stern Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each otherPlease notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us

With the bundle box, the right parts are right at handWith our bundle box, you have all the important installation parts for a quick and uncomplicated assembly at hand. Get on the water faster and save money (compared to the individual purchase price).Assembling the Tsunami on your own also makes sure every item is placed just the way you want it. In order to be able to support you even better with the assembly, we have provided you with an assembly example at the Downloads area. You may use this as a guide during assembly process. If you still have questions during assembly, you are welcome to contact us at any time.The Tsunami comes from the FSR-O 3.5 class and became German Champion there. The small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners. That's included1x Tsunami | 1744 1x Brass PTFE Tube | 1002 1x Flex shaft | 1090 2x Silicone hose | 1552 1x Linkage | 1833.11x Rudder Strut Set | 10701x Water inlet | 1791-D 2x Water outlet | 1795 2x Rubber cuff | 16481x Clip | 1556 1x Clutch 5 - 4.75mm | 1036 1x Hull transmission | 1070-1 1x Stern tube holder | 1012 1x Flex shaft security | 2254 1x Motor mount with ESC mount | 2412.21x Servo mount | 1674-AS2The advantages at a glance Low construction costs | Short set-up time Suitable for FSR Small and manoeuvrable for optimal handling Suitable for 4.75mm (3/16") flex shaft Suitable for inrunners of the 40 series and 5-8S Good to know The center of gravity is 26-30% from the stern Distance between Drive Dog and drive body should be 1,5mmManufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP Therefore, the upper and lower parts are directly connected to each other.Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason. For further questions please contact us