A clean thingKeep your setup tidy with these hose and cable holders. The advantages at a glance Available in single, double and triple holders Immediately ensures a clean and clear structure Suitable for hoses with an outer diameter of up to 7mm Easy assembly with superglue or other plastic adhesives
Rudder mount with single steering Suitable for your boat between 100-160cm (39,37" - 70").
Total length: 70mm (2,76")Adapter: 40 x 32,5mm (1,57 x 1,28")Rudder intake inner: 4,2mm (0,17")Material: Aluminium
Attachment milling: 4 x M4 Rudderblade not included.
Good to knowA little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.
Paint? Not necessary!Our decals are made only with high quality foil. Extra clear varnish of our decals is therefore not necessary, but possible. Convince yourself of their longevity, the brilliant colors and the easy to apply bows. Thats includedDelivery includes the decal set (sticker) for the Racemaster | the Racemaster hull is not includedThat fitsSuitable for RacemasterSimilar boats with 900mm lengthGood to knowTips you can find here in the section Downloads.
Paint? Not necessary!Our decals are made only with high quality foil. Extra clear varnish of our decals is therefore not necessary, but possible. Convince yourself of their longevity, the brilliant colors and the easy to apply bows. Thats includedDelivery includes the decal set (sticker) for the Drambui | the Drambui hull is not includedThat fitsSuitable for DrambuiSimilar boats with 1300mm lengthGood to knowTips you can find here in the section Downloads.
Because not everything does turn out as plannedToo little cooling or just wear and it's done. The carburetor insulator deforms, leaks and a precise carburetor setting is no longer possible. No problem you will find the right spare part for your Zenoah G320PUM here.Material: PlasticSuitable for: 32ccm
35ccm
Strut for individual drive assemblyWith this strut you can adapt a strut drive to the needs of your model boat yourself.The advantages at a glance: Suitable for 5mm propeller shaft Suitable for flex shaft 3.2mm, rigid shaft or similar Strut blade has cut out for adjustung height (17x6mm | 0,67x0,24") Individual drive assembly possible
Strut for individual drive assemblyWith this strut you can adapt a strut drive to the needs of your model boat yourself.The advantages at a glance: Suitable for 5mm propeller shaft Suitable for flex shaft 3.2mm, rigid shaft or similar Strut blade has cut out for adjustung height (8x4mm | 0,31x0,16") Individual drive assembly possible
Drive dog protection for propellersThe advantages at a glance The propeller is held by the Drive Dog in the "plug-in system" Secured with a grub screw on the propeller shaft Made from V2A - therefore also suitable for salt water
Quality coupling with squared endThe advantages at a glancemade of chromed bronzefor safe, precise, free of imbalance connection of motor and flex shaftabsolute centriclossless transfer of motor torque to flex shaftThats fits 7mm (0,28") motor shaft 6,35mm (1/4") flex shaft with square end How its doneUnscrew the setscrew and connect with motor shaft. Fasten the setscrew and connect greased flex shaft from squared side. The setscrew may be secured with Loctite.
Quality coupling with squared endThe advantages at a glancemade of chromed bronzefor safe, precise, free of imbalance connection of motor and flex shaftabsolute centriclossless transfer of motor torque to flex shaftThats fitsM6 motor shaft 6,35mm (1/4") flex shaft with square end How its doneUnscrew the setscrew and connect with motor shaft. Fasten the setscrew and connect greased flex shaft from squared side. The setscrew may be secured with Loctite.
Rigid clutch for small boats and small motorsThe advantages at a glanceeasy and fast connection of rigid shaft and motor shaft made of aluminiumconnection with set screw on both sides
Collet clutch for connection of motor shaft and flex shaftThe advantages at a glance Made of aluminum Easy assembly and disassembly That fits Suitable for 4mm (0,16") flex shaft
suitable for 4mm (0,16") motor shaft
No wet feetTo protect your servo, receiver, receiver battery and other electronic parts you may use a RC Box for extra protection. This hull is for self assembly and includes the box and the polycarbonat hatch.The advantages at a glancebest laminate of epoxy resin and glass fabric4mm polycarbonate lid Also suitable for catamarans because of flat bottom
High, flat, large or small?There are two types of air scoops for the original racing boats. Flat air scoops have a small resistance, but there is a risk of incomming splash water over the air scoop in the intake of the engine. Therefore, with flat air ducts a so-called airbox is used, which separates the water from the air. As this solution requires a lot of space in the engine compartment, there are alternatively high air scoops. Although these have a high air resistance, but provide plenty of air to the engine without risk of splash water.Good to knowFor electro Powerboats, our air ducts made of GFK play an optical role only. For gasoline boats, the air scoop ensures sufficient draft. For both solutions, the air scoops are attached with polymer adhesive directly on the deck or the hatch and optionally reinforced with glass fabric.
For perfect viewWith help of this polycarbonat window, you are able to create the perfect scale look for your Lizard Xtreme or similar boats. Please notice that this item is B-stock with small optical deficits , therefore the low price.Thats how its doneThe corresponding areas are cut out on the Lizard lid and supplemented by the use of the polycarbonat window. Good to knowPlease ensure that your lid is well sealed against entering water even after the window had been installed. This is particularly important when using electric motors. If you have any further questions, please contact us anytime
Reverse unit for your Jet 4You are looking for a way to be able to drive backwards with your Jet 4? The reverse unit made of plastic just right then.
Thats included1x reverse unit made of black plasticGood to know!The reversing flap should not be activated while driving as otherwise it may be torn off. Therefore, first stop the boat and press 1/4-1/3 throttle then.
This fits:Fits tuned pipes with an outer diameter of 22 mm. Cooling significantly extends the service life of the connector and significantly reduces heat buildup. Dimensions: Inner diameter: 22.4 mm Outer diameter: 37.7 mm
Length: 30 mm
Material: Aluminum
Color: Black anodized Includes:
1x Manifold cooling
2x O-rings
2x Cooling nipples with sealing rings
A clean thingThis passage is suitable both as a fuel passage and as a tank fitting and cooling water passage.The advantages at a glanceIt is mounted directly on the fuselage or tankThe passage is inserted and then screwed tight from the opposite sideThe cooling water can be routed directly from the water intake of the rudder blade into the passage and from there using a silicone hoseDelivery including motherWe recommend using sealant
Clutch pads with a new pad material for better grip and longer life - free of asbestos. That fits!The spring and weight of these clutch shoes are suitable for your engine between 22-32ccm such as. Zenoah, RCMK, CYWhat is included?couplings jaws incl. standard springfixing screws 4 spacersGood to know! Should the clutch shoes be wet after a rollover, we recommend to dry them completely before further use as otherwise a kind of glaze can form which leads to poor adhesion.
Jet transmissions for electric and combustion engines That fits: Electric motors from 3KW Combustion engines from 1HP Helical gears for high transmission performance and smooth running Two parallel shafts with a distance of 80mm. Good to knowThe gearbox is not filled with oil before shipping to avoid contamination in the package. It is therefore urgently necessary to fill up with 10-15ccm gear oil before use.
Stay coolWith this water cooling jacket, suitable for inrunner brushless motors, your inrunner motor is water-cooled.The advantages at a glanceEasy to retrofit | is pushed directly onto the engine and connected to the cooling circuit inside the boat.Suitable for internal rotor motors of the 36er seriesDelivery includes O-rings for internal sealing of the water cooling jacket Delivery including cooling water nipple How it`s doneGrease O-rings with Vaseline Insert into the cooling jacket Slide the cooling jacket onto the engine Connect the cooling nipple to the water circuit with a silicone hose (sequence: inlet, controller, motor, outlet)
For your own projectsWith this GFK plate you are able to turn your ideas into reality. You are able to choose between different thickness of material. Good to knowPlates can be cuted, drilled, milled and also glued with super glue, polymer glue as well as epoxy resin.For further questions please contact us.
Flex shaft 6,35mm (1/4") - reverseFlex shaft 6.35mm (1/4") without square end - reverse / counter clock. The advantages at a glance:6,35mm (1/4") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.
€14.00*
Trust Ecommerce Europe
Quality from Germany
This website uses cookies to ensure the best experience possible. More information...
