Prop shaft + Flex shaft | 6,35mm

€27.00*

Content: 1 Piece

Prices incl. VAT plus shipping costs

In stock, delivery time: 1-5 labor days**

Rotation flex shaft

Left (Normal | #1005)

Right (Counter clock | #1005-R)

Product number: 1075-EF.R

Shipping weight/volume: 0.1 kg

Available stock: 2

Product information "Prop shaft + Flex shaft | 6,35mm "

Spare part by hand
Spare prop shaft 6,35mm (1/4") made of stainless steel ready for usage with already glued in flex shaft (rotation according to your order)

That fits

Strut 1071
Strut with outrigger short 1075-K
Strut with outrigger long 1075-L
Rudder Strut Set 1068-RS | 1069-RS

Good to know

To avoid lost of your prop shaft and propeller, we suggest to use our flex safety with ball bearing.

Length prop shaft:	95mm (3,74")
Milling:	6,35mm (1/4")
Outside diamater:	8mm (0,31")
Material:	Stainless steel
Weight:	33g

Prop shaft + Flex shaft | 6,35mm

Product safety information:

Manufacturer:

MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com

That fits

Strut 5 + Outrigger | 6,35mm (1/4") | Short | Several versions

Simple design that convincesThe advantages at a glance: Adjustable inclineMade of high quality aluminum 7075Prop shaft made of V2A - therefore salt water resistant Brass tube can be glued directly into the strut That fits Hydroplane, outrigger, catamaran, monoboat from 110cm (43,3")Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. Place a piece of white paper on the oarstand and rub over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us

€45.00*

Strut 5 + Outrigger | 6,35mm (1/4") | Long

Simple design that convincesThe advantages at a glance: Adjustable inclineMade of high quality aluminum 7075Prop shaft made of V2A - therefore salt water resistantBrass tube can be glued directly into the strut That fits Hydroplane, outrigger, catamaran, monoboat from 110cm (43,3")Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. Place a piece of white paper on the oarstand and rub over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us

€49.00*

Strut 4 | 6,35mm (1/4")

Top quality at a good priceSimple but effective strut suitable for boats from 110cm (43,3")The advantages at a glance: Manufactured from high-strength aluminum 7075Anodized black Brass tube can be glued directly into the strut Height individually adjustable via the recess in the strut Propeller shaft made of V2A - therefore salt water resistantThat fits: 6.35mm flex shaft and 10mm brass-PTFE tube Suitable for rudder - strut set 1068 and 1069 as well as 1068-RS and 1069-RSGood to knowFor fine adjustment of the strut, we recommend marking the starting position with a pen, for example. This way you can easily find the starting position if the change did not have the desired effect.

€36.00*

Strut 5 | 6,35mm (1/4")

Top quality at a good priceSimple but effective strut suitable for boats from 110cm (43,3")The advantages at a glance: Manufactured from high-strength aluminum 7075 Brass tube can be glued directly into the strut Height individually adjustable via the recess in the strut Propeller shaft made of V2A - therefore salt water resistantThat fits: 6.35mm flex shaft and 10mm brass-PTFE tube Suitable for outrigger short and long (1075-K | 1075-L)Good to knowFor fine adjustment of the strut, we recommend marking the starting position with a pen, for example. This way you can easily find the starting position if the change did not have the desired effect.

€38.00*

Flex safety | 6,35mm (1/4")

Security and thrust bearingThe advantages at a glance The ball bearing in the flex shaft lock prevents vibrations and also serves as a thrust bearing The two-piece retaining ring guarantees precise attachment Manufactured from high-strength aluminum 7075That's how it's done Slide the flex shaft lock over the brass/PTFE tube Using a screwdriver or similar, mark the hole in the brass/PTFE tube through the opening for the grease nipple Take the flex shaft lock from the brass/PTFE tube and drill the hole in the tube at the marked point You can then mount the flex shaft lock completely on the brass/PTFE tube and now conveniently grease the internal flex shaft using the grease nipple Good to knowRegular greasing of the flex shaft via the grease nipple significantly increases the durability of the material. We recommend using flex shaft grease for this.

€23.00*

Support | Steven pipe | Brass pipe | 10mm (0,39")

Securing the brass - PTFE tubeThe advantages at a glance Securely mount the brass PTFE tube in your boat Height individually adjustable The flex shaft is prevented from swinging up Manufactured from high-strength aluminum 7075How its doneFor easy assembly, we recommend using polymer glue. To do this, degrease the fuselage at the required point using brake cleaner and then glue in the stern tube holder.

€17.00*