Flex safety | 4,75mm (3/16")
€23.00*
Content:
1 Set
In stock, delivery time: 1-5 labor days**
Product number:
2254
Shipping weight/volume:
0.1 kg
Available stock:
110
Product information "Flex safety | 4,75mm (3/16")"
Security and thrust bearing
The advantages at a glance
- The ball bearing in the flex shaft lock prevents vibrations and also serves as a thrust bearing
- The two-piece retaining ring guarantees precise attachment
- Manufactured from high-strength aluminum 7075
That's how it's done
- Slide the flex shaft lock over the brass/PTFE tube
- Using a screwdriver or similar, mark the hole in the brass/PTFE tube through the opening for the grease nipple
- Take the flex shaft lock from the brass/PTFE tube and drill the hole in the tube at the marked point
- You can then mount the flex shaft lock completely on the brass/PTFE tube and now conveniently grease the internal flex shaft using the grease nipple
Good to know
Regular greasing of the flex shaft via the grease nipple significantly increases the durability of the material. We recommend using flex shaft grease for this.
Technical datas
| Ball bearing: | 5mm (0,20") |
|---|---|
| Material: | Aluminium 7075 |
| Suitable for: | 4,75mm (3/16") Flex shaft | Brass pipe 7mm (0,28") |
Flex safety | 4,75mm (3/16")
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Left
Highest quality for highest demandsWith our flex shaft your project will have no limitThe advantages at a glance:High quality for high power setups4,75mm (3/16") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.
€16.50*
Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Right
Highest quality for highest demandsWith our flex shaft your project will have no limitThe advantages at a glance:High quality for high power setups4,75mm (3/16") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite.
€16.50*
Brass PTFE Hose | Steven pipe | 7mm (0,27") | 30cm (11,81") length
Protection for your flex shaftOur brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.The advantages at a glanceEasily bandable bras pipe for individual adjustment to your boatSuitable for 4,75mm (3/16") flex shaft Greasy PTFE material avoids friction between flex shaft and brass pipeThats how its doneWe recommend to grease your flex shaft frequently.
€8.00*
Support | Steven pipe | Brass pipe | 7mm (0,28")
Securing the brass - PTFE tubeThe advantages at a glance Securely mount the brass PTFE tube in your boat Height individually adjustable The flex shaft is prevented from swinging up Manufactured from high-strength aluminum 7075How its doneFor easy assembly, we recommend using polymer glue. To do this, degrease the fuselage at the required point using brake cleaner and then glue in the stern tube holder.
€16.00*