Skip to main content Skip to search Skip to main navigation
Trust Ecommerce Europe
Quality from Germany

Brass PTFE Hose | Steven pipe | 7mm (0,27") | 30cm (11,81") length

Product information "Brass PTFE Hose | Steven pipe | 7mm (0,27") | 30cm (11,81") length"


Protection for your flex shaft
Our brass ptfe hose ensures free spinning for your flex shaft inside your boat and avoids vibration.

The advantages at a glance

  • Easily bandable bras pipe for individual adjustment to your boat
  • Suitable for 4,75mm (3/16") flex shaft 
  • Greasy PTFE material avoids friction between flex shaft and brass pipe

Thats how its done

We recommend to grease your flex shaft frequently. 


Technical datas
Outer diameter:              7mm (0,27")
Inner diameter: 6mm (0,24")
Suitable for: 4,75mm (3/16") flex shaft
Material: Brass | PTFE
Length: 30cm (11,8")
Brass PTFE Hose | Steven pipe | 7mm (0,27") | 30cm (11,81") length

Product safety information:  

Manufacturer:  

MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com

That fits

Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Left
Highest quality for highest demandsWith our flex shaft your project will have no limitThe advantages at a glance:High quality for high power setups4,75mm (3/16") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite. 

€15.50*
Flex shaft | 4,75mm (3/16") | 100cm (39,37") | Right
Highest quality for highest demandsWith our flex shaft your project will have no limitThe advantages at a glance:High quality for high power setups4,75mm (3/16") diameterProduct photo shows delivered directionThats how its doneFor best connection we recommend to sand back the flex shaft end, degrease and glue into the prop shaft with Loctite. 

€15.50*
Support | Steven pipe | Brass pipe | 7mm (0,28")
Securing the brass - PTFE tubeThe advantages at a glance Securely mount the brass PTFE tube in your boat Height individually adjustable The flex shaft is prevented from swinging up Manufactured from high-strength aluminum 7075How its doneFor easy assembly, we recommend using polymer glue. To do this, degrease the fuselage at the required point using brake cleaner and then glue in the stern tube holder.

€16.00*
Flex safety | 4,75mm (3/16")
Security and thrust bearingThe advantages at a glance The ball bearing in the flex shaft lock prevents vibrations and also serves as a thrust bearing The two-piece retaining ring guarantees precise attachment Manufactured from high-strength aluminum 7075That's how it's done Slide the flex shaft lock over the brass/PTFE tube Using a screwdriver or similar, mark the hole in the brass/PTFE tube through the opening for the grease nipple Take the flex shaft lock from the brass/PTFE tube and drill the hole in the tube at the marked point You can then mount the flex shaft lock completely on the brass/PTFE tube and now conveniently grease the internal flex shaft using the grease nipple Good to knowRegular greasing of the flex shaft via the grease nipple significantly increases the durability of the material. We recommend using flex shaft grease for this.

€23.00*