Jet 52 | Steerable | Jet drive | Jet propulsion
€299.00*
Content:
1 Piece
Preorder, Delivery time: 14 - 28 labor days**
Product number:
1723-N-C
Shipping weight/volume:
1.5 kg
Product information "Jet 52 | Steerable | Jet drive | Jet propulsion"
Perfect for rioting
This jet drive is the perfect companion for your model boat with a vertical stern (90°) and a length of at least 1.20 m or your body board.
The Jet 52 supplies extrem high maneuverability.
The advantages of the Jet 52 at a glance:
- Nozzle, impeller, stator made of high-strength aluminum 7075
- All parts black anodized for extra protection against corrosion
- Flow optimized tunnel made of carbon filament or metal
- Vector control (horizontal | vertical)
- Triple bearing and shaft seal (Simmerring)
- Direct lubrication via grease nipple
- Salt water resistant
- Adjustable angle Left | right +/- 15° | Up | Down +/- 10°
That fits:
- Boats with a 90° stern and at least 1.20m in length
- Body boards | Short impulse drive for stand up paddling boards
- Internal and external rotor motors 40-50 series
- Gas engines with 26-32ccm
Good to know:
- The jet must be greased before usage
- Flush with fresh water after usage in salt water
- If 2 Jets are used, we recommend a minium distance of 80mm between both Jets
| Length: | 220mm (8,66") |
|---|---|
| Height: | 80mm (3,15") |
| Width: | 82mm (3,23") |
| Weight: | 490g |
| Shaft: | 8mm (0,31") |
| Impeller: | 52mm | Aluminium 7075 (2,05") |
| Static thrust: | 120 - 240N (12-24,47Kg) |
| Rpm: | 23.500 - 26.500 |
| Min. required power: | 2,5 KW Current |
| Material: | Aluminium 7075 | Tunnel Carbon filament |
Jet 52 | Steerable | Jet drive
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Brushless motor | 5692-730KV | Inrunner motor
Good quality at a low priceThe advantages at a glance6 pole rotorDouble ball bearingGood torque | heat build-up ratioHigh balanced magnet armatureSmooth running even at high speedsDirection of rotation of the motor can be changed by changing the phasesThat fits Model boats from approx. 1,15m length 240 - 300A ESC8S | 2 blade propellers | Aluminum | slope 1.4 | Diameter 55-60mm 8S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 54-59mm 10S | 2 blade propellers | Aluminum | slope 1.4 | Diameter 58-62mm 10S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 57-61mm12S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 57-64mm12S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 56-63mmFor further questions please contact us
€159.00*
Brushless motor | 5692-1000KV | Inrunner motor
Good quality at a low priceThe advantages at a glance6 pole rotorDouble ball bearingGood torque | heat build-up ratioHigh balanced magnet armatureSmooth running even at high speedsDirection of rotation of the motor can be changed by changing the phasesThat fits Model boats from approx. 1,15m length 240 - 300A ESC8S | 2 blade propellers | Aluminum | slope 1.4 | Diameter 55-60mm 8S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 54-59mm 10S | 2 blade propellers | Aluminum | slope 1.4 | Diameter 58-62mm 10S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 57-61mm12S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 57-64mm12S | 3 Blade Propeller | Aluminum | slope 1.4 | Diameter 56-63mmFor further questions please contact us
€159.00*
Scorpion HK-5035-760KV | 7,4KW | Water cooled | Outrunner
Exclusive special series of the popular Scorpion enginesThis series of water-cooled external rotor motors, manufactured exclusively for us, was developed in close cooperation with Scorpion Motors.The advantages at a glanceOutrunner motor with high efficiencyDirect water cooling inside motor - cooling water nipples are connected to motor directly through the opposite millings for water nipplesThe third milling has to be closed with a set screwLarge ball bearings for high stability and long service life4 screws M4, 3 x cooling nipple M4 included to deliveryRotation of motor can be changed by exchange of phases or usage of suitable ESC That fits 300A regulators and 6-10S Propeller at 6S | 55-57mm | pitch 1.4 | 2 blade Propeller at 6S | 54-56mm | pitch 1.4 | 3 blade Propeller at 8S | 54-63mm | pith 1.4 | 2 blade Propeller at 8S | 53-62mm | pith 1.4 | 3 blade Propeller at 10S | 54-65mm | pitch 1.4 | 2 bladePropeller at 10S | 53-64mm | pitch 1.4 | 3 bladeFor further questions please contact us
€359.00*
Water cooling jacket | 62 x 50mm (2,44 x 1,97") | Inrunner motors | 50er Series
Stay coolWith this water cooling jacket, suitable for inrunner brushless motors, your inrunner motor is water-cooled.The advantages at a glanceEasy to retrofit | is pushed directly onto the engine and connected to the cooling circuit inside the boat or water craft.Suitable for internal rotor motors of the 50er series, like 5692, 56110...Delivery includes O-rings for internal sealing of the water cooling jacket Delivery including cooling water nipple How it`s doneGrease O-rings with Vaseline Insert into the cooling jacket Slide the cooling jacket onto the engine Connect the cooling nipple to the water circuit with a silicone hose (sequence: inlet, controller, motor, outlet)
€22.00*
Reverse unit | Jet 48 | Jet 52
Reverse unit for your Jet 52 and Jet 48 You are looking for a way to be able to drive backwards with your Jet 52 or Jet 48? The reverse unit made of carbon and aluminum is just right then.
Thats included1x reverse unit made of GFK black1x X steering2x side attachment made of Aluminium 7075 | anodized black2x sleeve for side attachments made of Aluminium 7075
That's how it's doneThe vector control of the Jet 52 | Jet 48 is removedThe reversing flap is mounted with two angles and two M4 screws to the Jet surroundingFor driving, 2.5-3mm spokes (for example bicycle spokes) and either two servos with 3-5 Kg or 1x 10Kg are neededUsing the reversing unit eliminates the vector control. The water jet can therefore be steered left and right, but not up and downGood to know!The reversing flap should not be activated while driving as otherwise it may be torn off. Therefore, first stop the boat and press 1/4-1/3 throttle then.
€78.00*
Jetsprint | Jetboat | 1110mm (43,7") | Several versions
Material :
C-AFK
Free recreation of Australian and New Zealand jet boats They drive there in artificially created slalom channels at very high speeds. Our Jetsprint can therefore be built with a jet drive true to the original. This gives you the opportunity to riot properly even when the water level is flat - exactly when other boats can no longer drive.
The Jetsprint has a very high maneuverability and an extremely high fun factor. The advantages at a glance High maneuverability for fast driving fun Suitable for any water and for beginners as well as professionals Suitable for our Jet 48 and Jet 52 Suitable for 40s - 50s electric motors and combustion engines with 22-32ccm Good to know The center of gravity for the structure is approx. 40% from the rear Manufactured using the "wet in wet" sandwich process (1 layer 100 GRP + 1 layer 160 C-AFK + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €330.00*
Jetsprint | Jetboat | 1110mm (43,7") | Several versions
Material :
GFK
Free recreation of Australian and New Zealand jet boats They drive there in artificially created slalom channels at very high speeds. Our Jetsprint can therefore be built with a jet drive true to the original. This gives you the opportunity to riot properly even when the water level is flat - exactly when other boats can no longer drive.
The Jetsprint has a very high maneuverability and an extremely high fun factor. The advantages at a glance High maneuverability for fast driving fun Suitable for any water and for beginners as well as professionals Suitable for our Jet 48 and Jet 52 Suitable for 40s - 50s electric motors and combustion engines with 22-32ccm Good to know The center of gravity for the structure is approx. 40% from the rear Manufactured using the "wet in wet" sandwich process (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €330.00*
Jetsprint | Jetboat | 1110mm (43,7") | Several versions
Material :
CFK
Free recreation of Australian and New Zealand jet boats They drive there in artificially created slalom channels at very high speeds. Our Jetsprint can therefore be built with a jet drive true to the original. This gives you the opportunity to riot properly even when the water level is flat - exactly when other boats can no longer drive.
The Jetsprint has a very high maneuverability and an extremely high fun factor. The advantages at a glance High maneuverability for fast driving fun Suitable for any water and for beginners as well as professionals Suitable for our Jet 48 and Jet 52 Suitable for 40s - 50s electric motors and combustion engines with 22-32ccm Good to know The center of gravity for the structure is approx. 40% from the rear Manufactured using the "wet in wet" sandwich process (1 layer 100 GRP + 1 layer 160 CFK + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €330.00*
River Race | Jetboot | Jet racing boat | 1220mm (48")
Sleek jet racing boat from the white water sceneOur River Race jet boat is a semi scale replica of the jet boats from the USA, which are equipped with 500 - 2500 hp for racing upstream. The model is characterized by its double tunnel system and can therefore be prototypically built with a jet drive.The advantages at a glance Excellent driving characteristics even in shallow water High maneuverability
Suitable for 40 and 50 internal and external rotor motors Suitable for combustion engines up to 32ccm Good to know Due to the high suction, the center of gravity is 40% seen from the transom Manufactured using the "wet in wet" sandwich process (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
from €319.00*
Waverider | Jetbike | 1180mm (46,5")
Let's get ready to rumble!The Waverider Jet Bike is just right for letting off steam on the water. Due to its compact size, this model can still be transported easily and still has an appealing size on the water.The advantages at a glance Perfect for those who like to rampage on the water Compact size for easy portability and inexpensive set-up That fits! Jet drives such as our Jet 48 and Jet 52 - we recommend using a reversing flap Suitable for 40 - 50 internal and external rotor electric motors Suitable for combustion engines up to 26ccm Good to know! The center of gravity is 35% seen from transom Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
For further questions please contact us
€380.00*
Silicon hose | 4mm (0,16") | 1 Meter (39,37")
Quality from GermanyHigh quality silicone tubing for a reliable setupThe advantages at a glanceVery good resistance to alkalis, diluted acids, cleaning agents, etc.Weather and aging resistant, ozone resistant, steam sterilizable and physiologically harmlessOperating temperature ranges from -60° to +200° CBfR XV. and FDA § 177.2600 compliantDimensional tolerances according to the DIN ISO 3302-1 standardSuitable for methanol fuels or cooling water.
€4.90*
Secure clips | Hose holder | 4pcs.
For a clean and safe assemblyWith the clip clamp you secure your silicone or other hoses and thus ensure a clean and clear structure.The advantages at a glanceBetter securing of the silicone hose on cooling water nipplesEasily mountable and dismountableFor a clean and safe assembly
€3.60*