Mystic | C5000 | Catamaran | 1380mm (54,3")
€699.00*
Content:
1 Piece
Preorder, Delivery time: 18 - 34 labor days**
Product number:
1672-PL-CFK
Shipping weight/volume:
6 kg
Product information "Mystic | C5000 | Catamaran | 1380mm (54,3") "
The original with the uniquely good driving characteristics
For highest motor setup with double laminate and therefore even more strength.
There are many copies, but the handling and quality of our Mystic C5000 remains unmatched. Due to the design, our Mystic catamaran combines elegance and speed like no other boat. The specially shaped tunnel ensures perfect handling, atypical for catamarans, even in curves and at high speeds. When it comes to motorization, you can let off steam with this model with the most powerful electric motors. Speeds of over 180km/h are no problem for this hull.
The advantages at a glance
- Double laminate for even more strength
- Uniquely good driving characteristics for high speed and excellent cornering
- Only production worldwide according to the original data of the well-known Mystic C5000 by John Cosker
That fits
- Suitable for inner and outer rotor motors of the 40 and 50 series
- Suitable for assembly with our special scale drives | 1672-A
Good to know
- The center of gravity for the setup is in the middle of the second stage as viewed from the stern
- Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 CFK + 1 layer 100 GRP+ 1 layer 160 CFK)
Please notice that this product is not a ready to drive product.
Further this product is a model building accessories, therefore no toy.
Further this product is a model building accessories, therefore no toy.
Videos
YouTube
Technical details
| Length: | 1380mm (54,3") |
|---|---|
| Width: | 360mm (14,17") |
| Height: | 110mm (4,33") |
| Weight: | approx. 4400g (approx. 9,7 lbs) |
| Material: | CFK/ FRP (Carbon 2x + Fibre glass reinforced plastic) |
| Color: | White |
| Center of gravity for assembly: | Middle of second step from transom |
Download Assembly example
Mystic | C5000 | Catamaran | 1380mm (54,3")
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Drives | Mystic 1380mm | 6,35mm (1/4") | 1 Pair
Sophisticated solutions for highest demandsSuitable drives for your Mystic 1380mm and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds. Details at a glance Made of highest quality aluminium 7075 Black anodizing for great looks and protection against corrosion Special hydrodynamic profile Stainless steel prop shaft Salt water resistance Slight bearings ensure higher efficiency and low maintenance than ball bearings Washers made of PEEK material for much longer service time than PTFE and other materials. Good to knowThe drives do have an ajustable angle of +/-4° Tips for easy installation A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now. Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now.
For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us
€250.00*
Rudder | Mystic 1380mm (54,33") | C5000
Rudder with double steering and many featuresSuitable for your Mystic 1380mm.The advantages at a glance: Two-sided rudder linkage device Black anodizing for added protection against corrosion The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Good to knowA little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.
€150.00*
Flex shaft | Set | 6,35mm (1/4") | L+R
Easy and fast solutionWith our flex shaft set you get a suitable and uncomplicated solution for your boat with 6,35mm (1/4") twin drive.That's included:Flex shaft left 6,35mm (1/4")Flex shaft right 6,35mm (1/4") 2 x Brass PTFE tube 10mm (0,39")How its doneFor best grip, we recommend sanding the flex shaft before assembly, degreasing it and then gluing it into the prop shaft with Loctite.
€30.00*
Hydraulic dummie
A visual highlightThis hydraulic dummy simulates the original scale look and is intended as a visual supplement for the actual linkage set.The advantages at a glance Arm length adjustable 75-109mm Made of high-strength aluminum 7075 Threaded rod stainless steel Anodized black as protection against corrosion That's included2x hydraulic dummy (left | right) 2x ball heads 2x screw M2.5 2x stop nut M2.5
€19.00*
Rudder steering | Linkage set | Several versions
Thread:
M3
Remain on trackWith our rudder linkage, direct and precise control of the rudder is no problem. The connection with the rudder is done by ball heads which can be easily connected to the steering device of your rudder.That's included2 x brass guide tube 2 x stainless steel cable with threaded bush 2 x ball heads 2 x linkage connection How is it done?You need a 3.2mm hole. The brass tube is inserted into this and sealed from the inside with polymer adhesive. We recommend to grease the flex shaft with flex shaft grease before mounting. Due to the fitting accuracy of brass tube and flexible shaft as well as the lubrication with flex shaft grease, the entry of water is reliably prevented. Additionally you may also use rubber seals.Good to knowFor a secure fit, we recommend attaching the brass guide tube to the side of the servo holder. For this purpose, polymer adhesive is suitable.
from €18.00*