Skip to main content Skip to search Skip to main navigation
Trust Ecommerce Europe
Quality from Germany

Bulgarian Cat | RC Catamaran | 1460mm (57,48")

Product information "Bulgarian Cat | RC Catamaran | 1460mm (57,48")"



The record holder

The Bulgarian Cat has set over ten world speed records. Speeds of up to 257 km/h were measured. The underwater hull of the RC catamaran ensures optimal handling, even in curves, as well as rapid driving behavior.

The advantages at a glance 
  • Catamaran for the strongest engine and high speed 
  • Suitable for 50 internal and external rotor electric motors 


Good to know 
  • The center of gravity is between the first and second stage, depending on the weight of the motors and batteries. The heavier the weight, the further back the middle should be
  • Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)4

Please notice that this product is not a ready to drive product.
Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason.

Videos
YouTube
Technical datas
Length: 1460mm (57,48")
Width: 380mm (14,96")
Height: 170mm (6,69")
Weight: approx. 3100g
Material: GFK/ FRP  (Fibre glass reinforced plastic)
Color: White
Center of gravity:                            Between first and second step
Bulgarian Cat | RC Catamaran | 1460mm (57,48")

Product safety information:  

Manufacturer:  

MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Deutschland
Email: shop@mhz-powerboats.com

That fits

Drives | Mystic 1380mm | 6,35mm (1/4") | 1 Pair
Sophisticated solutions for highest demandsSuitable drives for your Mystic 1380mm and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds.  Details at a glance Made of highest quality aluminium 7075  Black anodizing for great looks and protection against corrosion Special hydrodynamic profile Stainless steel prop shaft  Salt water resistance Slight bearings ensure higher efficiency and low maintenance than ball bearings Washers made of PEEK material for much longer service time than PTFE and other materials.  Good to knowThe drives do have an ajustable angle of +/-4° Tips for easy installation  A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now.  Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now.  For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us

€250.00*
%
Rudder | Double steering | Bundle Box | Several versions
Bundle box for fast and easy assembly - Rudder with double steering Suitable for your boat between 100-160cm (39,37" - 62,99").Thats included1x Rudder | 10841x Rudder steering | 18331x Hydraulic dummie | 2206The advantages at a glance: Both sided rudder linkage device Universal usableThe rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Good to knowA little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.

from €70.00* instead of €87.00* single purchase price (19.54% saved)
Universal rudder | Double steering | + Adapter
Universal rudder with double steering and 2 way option for usageSuitable for your boat between 100-140cm (39,37" - 55,12").The advantages at a glance: This universal rudder can be used in 2 ways. Either with attachment to rump of boat directly or with universal flange which also enlarges outrigger of rudder thenScale look Both sided rudder linkage device The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Good to knowA little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.

€70.00*
Rudder mount | With steering arm
Rudder mount with single steering Suitable for your boat between 100-160cm (39,37" - 70"). Total length: 70mm (2,76")Adapter: 40 x 32,5mm (1,57 x 1,28")Rudder intake inner: 4,2mm (0,17")Material: Aluminium  Attachment milling: 4 x M4 Rudderblade not included.  Good to knowA little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.

€25.00*
Rudder | Double steering | Several versions
Rudder with double steering Suitable for your boat between 100-160cm (39,37" - 62,99").The advantages at a glance: Both sided rudder linkage device Universal usableThe rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Good to knowA little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.

from €50.00*
Hydraulic dummie
A visual highlightThis hydraulic dummy simulates the original scale look and is intended as a visual supplement for the actual linkage set.The advantages at a glance Arm length adjustable 75-109mm Made of high-strength aluminum 7075 Threaded rod stainless steel  Anodized black as protection against corrosion That's included2x hydraulic dummy (left | right) 2x ball heads 2x screw M2.5 2x stop nut M2.5

€19.00*
Rudder steering | Linkage set | Several versions
Thread: M3
Remain on trackWith our rudder linkage, direct and precise control of the rudder is no problem. The connection with the rudder is done by ball heads which can be easily connected to the steering device of your rudder.That's included2 x brass guide tube 2 x stainless steel cable with threaded bush 2 x ball heads 2 x linkage connection How is it done?You need a 3.2mm hole. The brass tube is inserted into this and sealed from the inside with polymer adhesive. We recommend to grease the flex shaft with flex shaft grease before mounting. Due to the fitting accuracy of brass tube and flexible shaft as well as the lubrication with flex shaft grease, the entry of water is reliably prevented. Additionally you may also use rubber seals.Good to knowFor a secure fit, we recommend attaching the brass guide tube to the side of the servo holder. For this purpose, polymer adhesive is suitable.

from €18.00*