Tsunami | 825mm (32,5") | Offshore Raceboat | Mono boat | FSR
€155.00*
Content:
1 Piece
Preorder, Delivery time: 18 - 34 labor days**
Product number:
1744
Shipping weight/volume:
4 kg
Product information "Tsunami | 825mm (32,5") | Offshore Raceboat | Mono boat | FSR"
Little speedster for big fun
The Tsunami comes from FSR-O 3,5 class and won German championship. The small boats are the perfect solution for fast and uncomplicated driving fun and are therefore also ideal for beginners.
The advantages at a glance
- Low construction costs | Short set-up time
- FSR compatibel
- Small and manoeuvrable for optimal handling
- Suitable for 4,75mm (3/16") flex shaft
- Suitable for small engines (inrunner | outrunner) of 30er and 40er series and 5-8S
Good to know
- The center of gravity is 26 - 30% from the stern
- Manufactured using the "wet in wet" sandwich process | 1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP
- Therefore, the upper and lower parts are directly connected to each other
Please notice that this product is not a ready to drive product.
Further this product is a model building accessories, therefore no toy.
Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason.
Videos
YouTube
Technical details
| Length: | 825mm (32,5") |
|---|---|
| Width: | 245mm (9,6") |
| Height: | 110mm (4,3") |
| Weight: | ca. 940g (approx. 1,06 lbs) |
| Material: | GFK/ FRP (Fibre glass reinforced plastic) |
| Color: | White |
| Center of gravity for assembly: | 26-30% from transom |
| Ride pad:: | Yes |
Tsunami | 825mm (32,5") | Offshore Raceboat | Mono boat | FSR
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fit`s
Rudder Strut Set | 4,75mm (3/16")
Rudder Strut Set for your boat between 70–100cm (27,6"–39,4")Perfect for your boat because of:Both-sided rudder sterring deviceMade from high quality aluminium 7075Drive shaft made of V2A (stainless steel) Suitable for usage in salt water as wellPlain bearings installed in the drives ensure high efficiency and low maintenance (compared to ball bearings)Thrust bearing washers are made of the highes quality PEEK material. This material is also resistant to most chemicalsThe rudder blade automatically folds upwards in the event of collision with flotsam. Damage to the hull caused by the rudder itself is thereby prevented.Thats included: Rudder - Strut system Adapter for Brass PTFE hose 7mm PEEK thrust bearing Good to knowWe recommend a distance of 1,5mm between drive dog and drive bodyFor assembly we recommend to use of 4 x M3 screws.
A small trick helps to mark the holes at the transom. Place a white piece of paper on the rudder stand and strip several times with a pencil over it. By doing so, you "copy" the exact contours of the holder. Now simply cut the template, stick to the transom with adhesive tape and drill the required holes.For further questions please contact us
€93.00*
Scorpion HK-3026-2300KV | 1,8KW | Water cooled | Outrunner
Exclusive special series of the popular Scorpion enginesThis series of water-cooled external rotor motors, manufactured exclusively for us, was developed in close cooperation with Scorpion Motors.The advantages at a glanceOutrunner motor with high efficiencyDirect water cooling inside motor - cooling water nipples are connected to motor directly through the opposite millings for water nipples. Third milling has to be closed with set screw Large ball bearings for high stability and long service life4 screws M3, 3 x cooling nipple M4, 3x gold connector 4mm, shrinking tube included to deliveryRotation of motor can be changed by exchange of 2 phases or usage of a suitable ESC That fits 180-200A regulators and 3-6S Propeller at 3-4S | 39-44mm | pitch 1.4 | 2 blade Propeller at 3-4S | 38-43mm | pitch 1.4 | 3 blade Propeller at 5-6S | 40-46mm | pith 1.4 | 2 blade Propeller at 5-6S | 39-44mm | pitch 1.4 | 3 bladeFor further questions please contact us
€133.00*
Scorpion HK-4035-1260KV | 4,8KW | Water cooled | Outrunner
Exclusive special series of the popular Scorpion enginesThis series of water-cooled external rotor motors, manufactured exclusively for us, was developed in close cooperation with Scorpion Motors.The advantages at a glanceOutrunner motor with high efficiency Direct water cooling inside motor - cooling water nipples are connected to motor directly through the opposite millings for water nipples. Third milling has to be closed with set screw Large ball bearings for high stability and long service life 4 screws M3, 3 x cooling nipple M4, 3x gold connector 4mm, shrinking tube included to delivery Rotation of motor can be changed by exchange of 2 phases or usage of a suitable ESC That fits 200 - 240A regulators and 5-8S Propeller at 5-6S | 47-49mm | pitch 1.4 | 2 blade Propeller at 5-6S | 46-48mm | pitch 1.4 | 3 blade Propeller at 7-8S | 48-52mm | pith 1.4 | 2 blade Propeller at 7-8S | 47-51mm | pitch 1.4 | 3 bladeFor further questions please contact us
€229.00*