Bearings | 6 x 8 x 10mm (0,24 x 0,31 x 0,39")
€2.00*
Content:
1 Pair
Available, delivery time: 1-5 labor days**
Product number:
1674-AE
Shipping weight/volume:
0.1
kg
Available stock:
7
Product information "Bearings | 6 x 8 x 10mm (0,24 x 0,31 x 0,39")"
To make sure everything runs smoothly
Replacement plain bearings 6x8x10mm as used for drives 1674-A or similair.
Good to know
The plain bearings should be serviced with grease every now and then. Pay attention to well-balanced propellers, as they can negatively affect the durability of the bearings.
Technical datas
| Size: | 6 x 8 x 10mm (0,24 x 0,31 x 0,39") |
|---|---|
| Weight: | 2g |
| Material: | Steel | Plumb |
| Delivery contains: | 1 Pair |
Bearings | 6 x 8 x 10mm (0,24 x 0,31 x 0,39")
Product safety information:
Manufacturer:
MÄDLER GmbH
Tränkestr. 6-8
70597 Stuttgart | Germany
E-Mail: info@maedler.de
Tränkestr. 6-8
70597 Stuttgart | Germany
E-Mail: info@maedler.de
That fits
Drives | Mystic 1140mm | 4,75mm (3/16") | 1 Pair
Sophisticated solutions for highest demandsSuitable drives for your Mystic 1140mm and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds. Details at a glance Made of highest quality aluminium 7075 Black anodizing for great looks and protection against corrosion Special hydrodynamic profile Stainless steel prop shaft Salt water reistance Slight bearings ensure higher efficiency and low maintenance than ball bearings Washers made of PEEK material for much longer service time than PTFE and other materials. Good to knowThe drives do have an ajustable angle of +/-4° We recommend a distance of 1,5mm between drive dog and drive bodyTips for easy installation A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now. Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now.
For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us
€210.00*
Drives | Mystic 840mm | 4,75mm (3/16") | 1 Pair
Sophisticated solutions for highest demandsSuitable drives for your Mystic 840mm and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds. Details at a glance Made of highest quality aluminium 7075 Black anodizing for great looks and protection against corrosion Special hydrodynamic profile Stainless steel prop shaft Salt water reistance Slight bearings ensure higher efficiency and low maintenance than ball bearings Washers made of PEEK material for much longer service time than PTFE and other materials. Good to knowThe drives do have an ajustable angle of +/-4° We recommend a distance of 1,5mm between drive dog and drive bodyTips for easy installation A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now. Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now. For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us
€140.00*