Cobra Shovelnose | 1150mm (45,3")
€410.00*
Content:
1 Piece
In stock, delivery time: 1-5 labor days**
Product number:
1735
Shipping weight/volume:
4 kg
Available stock:
1
Product information "Cobra Shovelnose | 1150mm (45,3")"
Often copied, never reached!
The scale GFK replica of the Cobra round nose racing boat of the 70s, by Georgo Merlotti, is the right round nose for top speeds. With a fin and a well-coordinated setup, cornering is not a problem. The Cobra round nose can develop its handling characteristics best in smooth but also slightly rough water.
The advantages at a glance
- Round nose also for high speeds and cornering
- Optimum combination of scale appearance and good driving characteristics
That fits
- Suitable for rudder strut drives
- Suitable for 50 internal and external rotor electric motors
- Suitable for combustion engines up to 26ccm
- The center of gravity for the assembly is 3 cm behind the tear-off edge of the float
- Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)
Please notice that this product is not a ready to drive product.
Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason.
Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason.
Videos
YouTube
Technical datas
| Length: | 1150mm (45,3") |
|---|---|
| Width: | 490mm (19,3") |
| Height: | 230mm (9,05") |
| Weight: | approx. 3000g (approx. 6,61 lbs) |
| Material: | GFK/ FRP (Fibre glass reinforced plastic) |
| Color: | White |
| Center of gravity for assembly: | 3m behind the trailing edge of the float |
Cobra Shovelnose | 1150mm (45,3")
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
That fits
Rudder Strut 4 Set | Midi | 6,35mm (1/4")
Length rudder blade:
135mm (5,31")
Universal complete system for your boat from 120cm (47,24")The advantages at a glance: Two-sided rudder linkage device Height adjustable strut Waterproof, clean finish with rubber sleeve guide Black anodizing for added protection against corrosion Extra reinforced mounting flange up to the rudder boom - therefore absolutely torsion-proof The rudder blade is designed in such a way that it automatically folds up in the event of an impact with flotsam in order to prevent damage Rudder blade available in several lengthsThats included: Rudder - strut system (strut 4) with linkage levers on both sides Thrust washer made of PEEK material Good to knowWe recommend using 4 x M4 screws for assembly. A little trick helps when marking the holes at the rear. To do this, place a piece of white paper on the rudder stand and stroke over it several times with a pencil. In this way you "copy" the exact contours of the holder. Now simply cut out the template, stick it to the fuselage with adhesive tape and drill the required holes.For further questions please contact us
from €135.00*
%
Scorpion HK-5035-760KV | Bundle Box | 7,4KW | Water cooled | Outrunner
Bundle box for fast and easy assembly Scorpion 5035-760KV motor comes as a set including required CFK motor mount and coupling. No long search and everything fits 100%.Thats included1x Motor Scorpion 5035-760KV water cooled | 2136-W Screws Cooling water nipple 1x CFK motor mount | 2136-M1x Collet clutch 10 - 6,35mm (0,39" - 1/4") | 1023-10The advantages at a glanceOutrunner motor with high efficiencyDirect water cooling inside motor - cooling water nipples are connected to motor directly through the opposite millings for water nipplesThe third milling has to be closed with a set screwLarge ball bearings for high stability and long service life4 screws M4, 3 x cooling nipple M4 included to deliveryRotation of motor can be changed by exchange of phases or usage of suitable ESC That fits 300A regulators and 6-10S Propeller at 6S | 55-57mm | pitch 1.4 | 2 blade Propeller at 6S | 54-56mm | pitch 1.4 | 3 blade Propeller at 8S | 54-63mm | pith 1.4 | 2 blade Propeller at 8S | 53-62mm | pith 1.4 | 3 blade Propeller at 10S | 54-65mm | pitch 1.4 | 2 bladePropeller at 10S | 53-64mm | pitch 1.4 | 3 bladeFor further questions please contact us
€385.00*
instead of
€406.40*
single purchase price (5.27% saved)