Dragon Lady | Semi scale Fountain 41 | Mono boat | 980mm (38,6")
€230.00*
Content:
1 Piece
Preorder, shippment time: 18 - 43 labor days**
Product number:
1755-D
Shipping weight/volume:
4 kg
Product information "Dragon Lady | Semi scale Fountain 41 | Mono boat | 980mm (38,6")"
Semi scale replica of the Fountain 41
The Dragon Lady lives up to its name and combines fast-paced driving fun with classic design.
The advantages at a glance
- Lateral stringers ensure stable handling and also serve as a tear-off edge
- Small and manoeuvrable for rapid driving fun
- Suitable for any water and for beginners as well as professionals
- Suitable for 4.75mm (3/16") rudder strut
- Suitable for 30 and 40 engines and 4-6 S
Good to know
- The center of gravity for building is 26-28%
- Manufactured using the "wet in wet" sandwich process (1 layer 100 GFK + 1 layer 160 GFK + 1 layer 100 GFK)
Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy.
Our hulls are all laminated by Hand. Air inclusions cant be avoided for that reason.
Videos
YouTube
Technical details
| Length: | 980mm (38,6") |
|---|---|
| Width: | 210mm (8,27") |
| Height: | 170mm (6,7") |
| Weight: | ca. 1000g (approx. 2,20lbs) |
| Material: | GFK/ FRP (Fibre glass reinforced plastic) |
| Color: | White |
| Center of gravity for assembly: | 26-28% from transom |
Dragon Lady | Semi scale Fountain 41 | Mono boat | 980mm (38,6")
Product safety information:
Manufacturer:
MHZ GmbH
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Hauptstrasse 61a
96182 Reckendorf | Germany
Email: shop@mhz-powerboats.com
Das passt dazu
Rudder Strut Set | 4,75mm (3/16")
Rudder Strut Set for your boat between 70–100cm (27,6"–39,4")Perfect for your boat because of:Both-sided rudder sterring deviceMade from high quality aluminium 7075Drive shaft made of V2A (stainless steel) Suitable for usage in salt water as wellPlain bearings installed in the drives ensure high efficiency and low maintenance (compared to ball bearings)Thrust bearing washers are made of the highes quality PEEK material. This material is also resistant to most chemicalsThe rudder blade automatically folds upwards in the event of collision with flotsam. Damage to the hull caused by the rudder itself is thereby prevented.Thats included: Rudder - Strut system Adapter for Brass PTFE hose 7mm PEEK thrust bearing Good to knowWe recommend a distance of 1,5mm between drive dog and drive bodyFor assembly we recommend to use of 4 x M3 screws.
A small trick helps to mark the holes at the transom. Place a white piece of paper on the rudder stand and strip several times with a pencil over it. By doing so, you "copy" the exact contours of the holder. Now simply cut the template, stick to the transom with adhesive tape and drill the required holes.For further questions please contact us
€93.00*
Hull passage | Transmission brass pipe | 7mm (0,28")
A clean thingFor easy and sealed assembly of the brass pipe / stern tube. The advantages at a glance Clean sealing of the hull passage Horizontal adjustment of the drive easily possible Delivery includes 2 NBR O-rings for additional sealingHow to do it The installation is generally as deep as possible in the V of the hull Drill a hole with a diameter of 18.5mm (0,73")Grease the supplied O-rings and insert them into the groove Apply polymeric adhesive to the knurled portion of the passage Push transmission into the hole and leave to dry for 24 hours
€8.50*
Scorpion HK-3026-2300KV | 1,8KW | Water cooled | Outrunner
Exclusive special series of the popular Scorpion enginesThis series of water-cooled external rotor motors, manufactured exclusively for us, was developed in close cooperation with Scorpion Motors.The advantages at a glanceOutrunner motor with high efficiencyDirect water cooling inside motor - cooling water nipples are connected to motor directly through the opposite millings for water nipples. Third milling has to be closed with set screw Large ball bearings for high stability and long service life3x gold connector 4mm, shrinking tube included to deliveryRotation of motor can be changed by exchange of 2 phases or usage of a suitable ESC That fits 180-200A regulators and 3-6S Propeller at 3-4S | 39-44mm | pitch 1.4 | 2 blade Propeller at 3-4S | 38-43mm | pitch 1.4 | 3 blade Propeller at 5-6S | 40-46mm | pith 1.4 | 2 blade Propeller at 5-6S | 39-44mm | pitch 1.4 | 3 bladeFor further questions please contact us
€133.00*
Scorpion HK-4035-1260KV | 4,8KW | Water cooled | Outrunner
Exclusive special series of the popular Scorpion enginesThis series of water-cooled external rotor motors, manufactured exclusively for us, was developed in close cooperation with Scorpion Motors.The advantages at a glanceOutrunner motor with high efficiency Direct water cooling inside motor - cooling water nipples are connected to motor directly through the opposite millings for water nipples. Third milling has to be closed with set screw Large ball bearings for high stability and long service life 3 x cooling nipple M4, 3x gold connector 4mm, shrinking tube included to delivery Rotation of motor can be changed by exchange of 2 phases or usage of a suitable ESC That fits 200 - 240A regulators and 5-8S Propeller at 5-6S | 47-49mm | pitch 1.4 | 2 blade Propeller at 5-6S | 46-48mm | pitch 1.4 | 3 blade Propeller at 7-8S | 48-52mm | pith 1.4 | 2 blade Propeller at 7-8S | 47-51mm | pitch 1.4 | 3 bladeFor further questions please contact us
€229.00*