Flex shaft set | Mystic 1380mm | Prop + Flex shaft | 6,35mm (1/4")

Sophisticated solutions for highest demandsSuitable drives for your Mystic 1380mm and fast and easy assembly as well as perfect driving experience. Due to their special hydrodynamic profile, the scale drives ensure safe handling and additional stability even at high speeds.  Details at a glance Made of highest quality aluminium 7075  Black anodizing for great looks and protection against corrosion Special hydrodynamic profile Stainless steel prop shaft  Salt water resistance Slight bearings ensure higher efficiency and low maintenance than ball bearings Washers made of PEEK material for much longer service time than PTFE and other materials.  Good to knowThe drives do have an ajustable angle of +/-4° Tips for easy installation  A little tricks helps marking the holes at the transom. Take a white sheet of paper and place it at the flange of the drive. Use a pencil and gently swipe over the flange. This way the structure is copied to the paper which can be used as template now.  Cut out the paper template and attach it to the transom of the hull by using masking tape. Drill the required holes now.  For fast and easy assembly (insulation) we recommend the usage of polymer glue. For further questions please contact us

The original with the uniquely good driving characteristicsThere are many copies, but the handling and quality of our Mystic C5000 remains unmatched. Due to the design, our Mystic catamaran combines elegance and speed like no other boat. The specially shaped tunnel ensures perfect handling, atypical for catamarans, even in curves and at high speeds. When it comes to motorization, you can let off steam with this model with the most powerful electric motors. Speeds of over 180km/h are no problem for this hull.The advantages at a glance Uniquely good driving characteristics for high speed and excellent cornering Only production worldwide according to the original data of the well-known Mystic C5000 by John CoskerThat fits Suitable for inner and outer rotor motors of the 40 and 50 series Suitable for assembly with our special scale drives | 1672-A Good to know The center of gravity for the setup is in the middle of the second stage as viewed from the stern Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. For further questions please contact us

The original with the uniquely good driving characteristics For highest motor setup with double laminate and therefore even more strength. There are many copies, but the handling and quality of our Mystic C5000 remains unmatched. Due to the design, our Mystic catamaran combines elegance and speed like no other boat. The specially shaped tunnel ensures perfect handling, atypical for catamarans, even in curves and at high speeds. When it comes to motorization, you can let off steam with this model with the most powerful electric motors. Speeds of over 180km/h are no problem for this hull.The advantages at a glanceDouble laminate for even more strengthUniquely good driving characteristics for high speed and excellent cornering Only production worldwide according to the original data of the well-known Mystic C5000 by John CoskerThat fits Suitable for inner and outer rotor motors of the 40 and 50 series Suitable for assembly with our special scale drives | 1672-A Good to know The center of gravity for the setup is in the middle of the second stage as viewed from the stern Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 CAFK + 1 layer 100 GRP + 1 layer 160 CAFK)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. For further questions please contact us

The original with the uniquely good driving characteristicsThere are many copies, but the handling and quality of our Mystic C5000 remains unmatched. Due to the design, our Mystic catamaran combines elegance and speed like no other boat. The specially shaped tunnel ensures perfect handling, atypical for catamarans, even in curves and at high speeds. When it comes to motorization, you can let off steam with this model with the most powerful electric motors. Speeds of over 180km/h are no problem for this hull.The advantages at a glance Uniquely good driving characteristics for high speed and excellent cornering Only production worldwide according to the original data of the well-known Mystic C5000 by John CoskerThat fits Suitable for inner and outer rotor motors of the 40 and 50 series Suitable for assembly with our special scale drives | 1672-A Good to know The center of gravity for the setup is in the middle of the second stage as viewed from the stern Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. For further questions please contact us

The original with the uniquely good driving characteristics For highest motor setup with double laminate and therefore even more strength. There are many copies, but the handling and quality of our Mystic C5000 remains unmatched. Due to the design, our Mystic catamaran combines elegance and speed like no other boat. The specially shaped tunnel ensures perfect handling, atypical for catamarans, even in curves and at high speeds. When it comes to motorization, you can let off steam with this model with the most powerful electric motors. Speeds of over 180km/h are no problem for this hull.The advantages at a glanceDouble laminate for even more strengthUniquely good driving characteristics for high speed and excellent cornering Only production worldwide according to the original data of the well-known Mystic C5000 by John CoskerThat fits Suitable for inner and outer rotor motors of the 40 and 50 series Suitable for assembly with our special scale drives | 1672-A Good to know The center of gravity for the setup is in the middle of the second stage as viewed from the stern Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 CFK + 1 layer 100 GRP+ 1 layer 160 CFK)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. For further questions please contact us

The original with the uniquely good driving characteristicsThere are many copies, but the handling and quality of our Mystic C5000 remains unmatched. Due to the design, our Mystic catamaran combines elegance and speed like no other boat. The specially shaped tunnel ensures perfect handling, atypical for catamarans, even in curves and at high speeds. When it comes to motorization, you can let off steam with this model with the most powerful electric motors. Speeds of over 180km/h are no problem for this hull.The advantages at a glance Uniquely good driving characteristics for high speed and excellent cornering Only production worldwide according to the original data of the well-known Mystic C5000 by John CoskerThat fits Suitable for inner and outer rotor motors of the 40 and 50 series Suitable for assembly with our special scale drives | 1672-A Good to know The center of gravity for the setup is in the middle of the second stage as viewed from the stern Production in the sandwich process, "wet in wet" (1 layer 100 GRP + 1 layer 160 GRP + 1 layer 100 GRP)Please notice that this product is not a ready to drive product. Further this product is a model building accessories, therefore no toy. For further questions please contact us